Simple, black tail light in "old-school design" for your moped, moped and small motorcycle.
Very similar to old Hella, ULO or CEV tail lights.
Three plastic dots are attached to each side, through which the light shimmers.
The glass is embedded in an aluminum socket.
The rear light has two bulbs with 6V and 3W and 5W respectively.
Two screws are embedded in the rear light for fastening. The rear light can therefore be attached to the mudguard.
Thread: M5
Screw spacing: 58 mm
Bulb: E10 (both bulbs are already installed)
Total length: 110 mm
Total width with base: 64 mm
Depth: 65 mm
Alternative rear lights and bulbs can be found in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
Manufacturer | GPO |
Tension | 6 V |
Test mark | none |
Material | Plastic, Aluminum |
Color | black, red |
Bulb holder | E10 |
Width | 64 mm |
Number of fixing points | 2 pcs |
Height | 110 mm |
Mounting type | Nuts & bolts |
Depth | 65 mm |
Battery operated | No |
Accessories & related products
GPO tail light ULO | Puch Maxi N, S old version
Manufacturer: GPO · Material: Plastic · Test mark: none · Bulb holder: BA15s · Tension: 6 V · Color: black · Color: red · Ø Receptacle: 4 mm · Width: 60 mm · Height: 110 mm · Mounting type: Nuts & bolts · Depth: 80 mm · Battery operated: No · Number of fixing points: 2 pcs
EUR 41,20
Rear light ULO | Sachs, Puch
Test mark: none · Material: Aluminum · Color: Chrome · Material: Steel · Color: red · Tension: 6 V · Width: 57 mm · Bulb holder: E10 · Height: 90 mm · Number of fixing points: 2 pcs · Ø Receptacle: 5 mm · Depth: 55 mm · Mounting type: Nuts & bolts · Battery operated: No
EUR 66,20
Not in stock
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Ø cable: 5 mm · Ø cable: 7 mm · Pony spare part no.: A2099 · Sachs spare part no.: 0265 100 00
EUR 9,85
swiing® revival upright spring blue galvanized | Puch
Spring design: Tension spring · Ø wire: 2.5 mm · Length spring hook: 19 mm · Length spring hook: 53 mm · Manufacturer: swiing® revival parts · Ø inside: 9 mm · Material: Spring steel · Surface: blue galvanized · Ø outside: 14 mm · Total length: 122 mm
EUR 3,05
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Ø inside: 94 mm · Material: Steel · Surface: powder-coated · Color: black · Number of teeth: 45 pcs · Thickness: 4.5 mm · Ø mounting hole: 6.7 mm · Hole spacing 2: 68 mm · Ø bolt circle: 105.5 mm · Hole spacing: 36.5 mm · Cranking (offset): 8 mm · Number of fixing points: 6 pcs
EUR 22,40
swiing® revival 17" front fender square Inox | Puch Maxi S, N
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: polished · Color: Chrome · Wheel size [inch]: 17 " · Folding the ends: closed folded · Shape of the mudguard: angular · Total length over ends: 565 mm · Scope: 740 mm · Wide mudguard profile: 82 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 200 mm · Mounting type: Nuts & bolts
EUR 39,30
Bumm mirror round Inox
Clamping diameter: 22 mm · Manufacturer: Bumm · Material: Chrome steel (stainless steel) · Material: Steel · Surface: chrome-plated · Color: Chrome · Thread type: M8x1.25 (standard thread) · Ø mirror surface: 107 mm · Ø mirror rod: 8 mm · Total length: 360 mm · Mirror rod length: 300 mm · Thread size: M8
EUR 28,10
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: blue galvanized · Surface: raw · Thread type: M5x0.8 (standard thread) · Color: silver · Drive: Slot · Drive: Triangular head · Total length: 47 mm · Total length: 60 mm · Thread length: 35 mm · Thread length: 50 mm
EUR 14,50
GPO front mudguard strut 17" chrome
Manufacturer: GPO · Material: Steel · Outer width: 160 mm · Color: Chrome · Surface: chrome-plated · Distance mudguard - center hole: 300 mm · Mounting type: Nuts & bolts · Number of fixing points: 4 pcs · Total length: 305 mm · Wheel size [inch]: 17 " · Ø mounting hole: 12.5 mm
EUR 16,80