Set of galvanized M6 threaded stud bolts with increased strength and 1D nuts for the intake, exhaust or cylinder base mounting of various mopeds, mopeds and small engine bikes (Puch, Sachs, Zündapp, etc.).
These stud bolts can also be used with Sachs engines when mounting a lift plate. The original cylinder stud bolts are usually too short.
Total length: 30 mm
Thread length: 12 / 12 mm
Strength of stud bolt: 10.9
Strength nut: 8
Material: Steel, galvanized
Nostalgic product for the highest demands of the quality brand swiing®.
Details
Manufacturer | swiing® revival parts |
Material | Steel |
Surface | blue galvanized |
Diameter | 6 mm |
Thread type | M6x1 (standard thread) |
Drive | External hexagon |
Thread length | 12 mm |
Total length | 30 mm |
Width across flats SW | 10 mm |
Strength class | 10.9, 8 |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Contents [ml]: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Color: blue · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 24,70
EUR 2.470,00/l
swiing® revival stud bolts M6x38 inlet/outlet galvanized (10.9 strength)
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Diameter: 5.9 mm · Thread type: M6x1 (standard thread) · Total length: 38 mm · Thread length: 11 mm · Thread length: 19 mm · Strength class: 10.9
EUR 2,25
swiing set stud bolts M6 / M5 Sachs (12.9 strength) Special
Diameter: 6 mm · Total length: 27.3 mm · Width across flats SW: 8 mm · Manufacturer: swiing · Material: Steel · Surface: blue galvanized · Surface: burnished · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Drive: External hexagon · Thread length: 9.5 mm · Thread length: 14 mm · Strength class: 10 · Strength class: 12.9
EUR 21,60
Moped fans like you also bought:
Meteor piston 38 mm #1 | Puch
Manufacturer: Meteor · Nominal diameter: 38 mm · Ø outside piston (A): 37.95 mm · Compression height (C): 22.7 mm · Curvature (D): 3.3 mm · Total piston height (E): 52.5 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Ø piston pin (B): 12 mm · Piston ring height: 2 mm · Tolerance group: 1 · Puch spare part no.: 349.1.10.106.0/21
EUR 56,20
GPO piston 40 mm (12 mm KoBo) | Puch X30 Velux fan-cooled
Nominal diameter: 40 mm · Manufacturer: GPO · Ø outside piston (A): 39.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.5 mm · Curvature (D): 3.4 mm · Total piston height (E): 52.5 mm · Number of piston rings (F): 2 pcs · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Piston ring height: 2 mm
EUR 39,30
EUR 50,60
GPO gasket set 38 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Area of application: Standard · Ø cylinder: 38 mm · Hole spacing inlet: 38 mm · Ø outlet inside: 22 mm · Hole spacing outlet: 42 mm · Decompressor: Yes · Number of components: 4 pcs · Hole pattern [mm]: 44 x 44 mm
EUR 10,00
GPO gasket set 40 - 41 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Area of application: Tuning · Ø cylinder: 40 mm · Ø cylinder: 41 mm · Number of components: 4 pcs · Ø outlet inside: 22 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Hole spacing inlet: 38 mm
EUR 10,00
Piston 38 mm (12 mm KoBo) short shirt | Puch fan-cooled
Nominal diameter: 38 mm · Ø outside piston (A): 37.95 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.9 mm · Curvature (D): 3.2 mm · Total piston height (E): 50.1 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm
EUR 45,00
swiing 40 mm cylinder kit 12 mm KoBo | Puch X30 Velux, NG-2AH
Nominal diameter: 40 mm · Manufacturer: swiing · Material: Gray cast iron · Camouflaged: No · Area of application: Tuning · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 55 ccm · Ø piston pin (B): 12 mm · Hole spacing inlet: 32 mm · Thread inlet: M6x1 (standard thread) · Hole spacing outlet: 42 mm · Number of fixing points: 4 pcs · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44
EUR 180,20
swiing 38 mm cylinder kit 12 mm KoBo | Puch X30 Velux, NG-2AH
Nominal diameter: 38 mm · Manufacturer: Meteor · Manufacturer: swiing · Material: Gray cast iron · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Camouflaged: No · Area of application: Tuning
EUR 146,40