Complete screw set for the frame of your Piaggio Ciao PX or C24 moped / moped.
The PX is the model with round seat post and rear light on the luggage carrier. The C24 can be recognized by the sprung, square seat post and the rear light on the luggage carrier.
The screw set consists of galvanized steel screws.
A detailed list with the affiliation of the corresponding screws is included.
The following areas are covered:
- Headlight
- Fork swing arms
- Front and rear mudguards
- Cable duct under tank
- Engine mounting
- Zünd coil
- Splash guard under carburettor
- Pump holder under side guard
- Footboard holder and footboard
- Saddle and suspension
- Equipmentand struts and swing arm
- Pannier clamp and luggage hooks
- Return light on luggage
- Exhaust
- Chain tensioner
- Rear wheel hub and gearbox
- Transmission Gearbox
- Number plate or holder
Note: As the bolt set is designed for two different model series, individual bolts are not required and will remain unused.
Parts such as spacers and rubber buffers for the mudguard can be found in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | blue galvanized |
Suitable for the following models
| Piaggio | Ciao - Ciao, Ciao |
Accessories & related products
swiing® revival screw set fan cover galvanized | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Thread type: M5x0.8 (standard thread) · Number of components: 8 pcs · Drive: Cross recess · Screw head: Panhead · Area of application: Standard
EUR 5,50
Moped fans like you also bought:
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut
EUR 11,20
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Total length: 6 mm · Manufacturer: Magura · Ø outside: 5 mm · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Thread length: 4 mm
EUR 2,25
swiing nozzle set M5 (50 - 70) Dell'Orto SHA, PHBG
Manufacturer: swiing · Material: Brass · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA (type 3) · Carburetor type: SHA (type 4) · Nozzle type: Main nozzle · Drive: Slot · Total length: 8 mm · Nozzle thread: M5 · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70
EUR 23,60
Stand 14 mm axle (1A quality) | Piaggio Ciao PX, C24
Manufacturer: Made in Italy · Material: Steel · Surface: varnished · Stand base - center mount (A): 232 mm · Color: black · Total width of stand base (B): 200 mm · Wide receptacle (C): 78 mm · Ø Receptacle (D): 14 mm · Wide upright foot (F): 20 mm · Total height: 250 mm
EUR 33,70
GPO control bearing set | Piaggio Ciao
Manufacturer: GPO · Material: Steel · Surface: blue galvanized · Bearing type: Bearing ring · Thread type: FG25.4 (1" 24G) · Color: silver · Ø mounting frame: 30.05 mm · Ø ball [inch] / [mm]: 5/32" (4.00 mm) · Ø inside: 27 mm · Ø outside: 41.4 mm · Ø outside: 42 mm · Height: 10.5 mm · Height: 17 mm
EUR 21,30
Fuel tap horizontal M12x1 (with union nut) bottom outgoing | Piaggio Ciao
Possible lever positions: open / closed / reserve · Material lever: Aluminum · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Alternative version of Piaggio spare part no.: 103089 · Piaggio spare part no.: 189525 · Piaggio spare part no.: 257073
EUR 11,20
Set of rear fender mounting screws Inox original | Piaggio Ciao
Manufacturer: Piaggio · Material: Chrome steel (stainless steel) · Material: Rubber · Color: black · Mounting type: Nuts & bolts · Piaggio spare part no.: 013092 · Piaggio spare part no.: 016406 · Piaggio spare part no.: 020106 · Piaggio spare part no.: 031092 · Piaggio spare part no.: 174968 · Piaggio spare part no.: 174969
EUR 28,10
Not in stock
Headlight with parking light black | Piaggio Ciao PX, C24
Manufacturer: Quenching · Test mark: none · Housing material: Plastic · Surface: raw · Lens material: Plastic · Color: black · Speedometer recording: 48 mm · Bulb holder: P26s · Bulb holder: Soffit pear · Tension: 6 V · Tension: 12 V · Battery operated: No · Switch included: Yes · Mounting type: Screws · Width: 125 mm · Ø External connection: 6 mm · Depth: 147 mm · Height: 90 mm · Area of application: Standard · Number of fixing points: 2 pcs · Piaggio spare part no.: 584240
EUR 30,30
Collection only possible with online purchase and appointment.
