Aluminum stroke plate for your Zündapp Belmondo, Bergsteiger moped / moped with type 247 engine.
The spacer is mounted under the cylinder base. The "lifting" of the cylinder increases the intake and exhaust timing. Accordingly, the same distance of the spacer should be turned down at the top of the cylinder
so that the original squish edge dimension and compression ratio are maintained.
Material thickness (selection): 0.5 / 1.0 / 1.5 / 2.0 mm
Material: aluminum
Ø cylinder neck: 50 mm
Number of attachment points: 4 pieces
Matching cylinders, sealant and alternative stroke plates in various thicknesses can be found in the accessories section.
Exclusive product for the highest demands from the quality brand swiing®.
Details
| Manufacturer | swiing® ingenious parts |
| Material | Aluminum |
| Surface | raw |
| Place of use | Cylinder base |
| Area of application | Tuning |
| Thickness | 0.5 mm, 1 mm, 1.5 mm, 2 mm |
| Ø cylinder | 50 mm |
Suitable for the following models
| Zündapp Belmondo | |
| Zündapp |
Accessories & related products
swiing® ingenious 39 mm cylinder kit tuning with head | Zündapp Bergsteiger M25, M50 (Type 247)
Manufacturer: Vertex · Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: No · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 42 mm · Nominal diameter: 39 mm · Thread inlet: M6x1 (standard thread) · Ø piston pin (B): 12 mm · Outlet type: slanted · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Decompressor: No · Area of application: Tuning
EUR 253,50
Not in stock
swiing® ingenious 44 mm cylinder kit tuning with head | Zündapp Bergsteiger M25, M50 (Type 247)
Nominal diameter: 44 mm · Manufacturer: Vertex · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Displacement: 65 ccm · Crankshaft stroke: 42 mm · Thread inlet: M6x1 (standard thread) · Outlet type: slanted · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Decompressor: No · Camouflaged: No · Area of application: Tuning
EUR 270,40
Dirko Dichtmasse rot (Silikon) Hochtemperatur 70 ml dauerelastisc
Temperature resistance (min.): -60 - 300 °C · Manufacturer: Elring · Contents [ml]: 70 ml · Area of application: Chemistry · Hazard warning: Causes serious eye irritation · Color: red · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Gap dimension (max.): 2 mm
EUR 25,80
EUR 368,57/l
swiing® ingenious lifting plate 2 mm aluminum | Zündapp Type 247
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: raw · Place of use: Cylinder base · Area of application: Tuning · Thickness: 0.5 mm · Thickness: 1 mm · Thickness: 1.5 mm · Thickness: 2 mm · Ø cylinder: 50 mm
EUR 22,40
swiing® ingenious lifting plate 1.5 mm aluminum | Zündapp Type 247
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: raw · Place of use: Cylinder base · Area of application: Tuning · Thickness: 0.5 mm · Thickness: 1 mm · Thickness: 1.5 mm · Thickness: 2 mm · Ø cylinder: 50 mm
EUR 22,40
swiing® ingenious lifting plate 1 mm aluminum | Zündapp Type 247
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: raw · Place of use: Cylinder base · Area of application: Tuning · Thickness: 0.5 mm · Thickness: 1 mm · Thickness: 1.5 mm · Thickness: 2 mm · Ø cylinder: 50 mm
EUR 22,40
swiing® ingenious lifting plate 0.5 mm aluminum | Zündapp Type 247
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: raw · Place of use: Cylinder base · Area of application: Tuning · Thickness: 0.5 mm · Thickness: 1 mm · Thickness: 1.5 mm · Thickness: 2 mm · Ø cylinder: 50 mm
EUR 22,40
Moped fans like you also bought:
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Number of components: 7 pcs · Area of application: Standard · Ø outlet inside: 19.9 mm · Hole spacing outlet: 42 mm · Hole spacing inlet: 32 - 38 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes
EUR 11,20
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents [ml]: 450 ml · Gearbox type: Foot control · Area of application: Gearbox lubrication with clutch · Gearbox type: Manual gearshift
EUR 11,20
EUR 24,89/l
Hot 
Leonelli 6V voltage regulator (1A quality)
Total length: 50 mm · Width: 27 mm · Height: 15 mm · Manufacturer: Leonelli · Ø mounting hole: 6 mm · Material: Aluminum · Material: Plastic · Surface: raw · Tension: 6 V · Performance: 50 W · Type of current: Alternating current (AC) · Mounting type: Screws
EUR 33,70
Collection only possible with online purchase and appointment.
