Intake air restrictor with Ø 12.5 mm inner diameter suitable for all 15 mm swiing and Bing original and reproduction Bing carburettors.
An O-ring is pre-assembled, which can be used for swiing and reproduction Bing carburetors. If an original Bing carburetor is available, the corresponding O-ring must also be ordered from the accessories and replaced with the pre-assembled one.
The fuel/air mixture is adjusted to suit the requirements.
For those who regulate the mixture via the intake air, however, these practical nozzles are like Christmas and Easter at the same time.
The tedious task of "taping off" the air filter is now a thing of the past.
The eyes of the thrifty among us will also light up, as fuel consumption is minimized and more money is left over at the end of the month.
The throttle body is simply inserted into the carburettor on the intake side. Thanks to the attached sealing ring, the throttle body is bombproof.
Exceptional product for the highest demands of the quality brand swiing®.
Details
Ø outside | 15 mm |
Manufacturer | swiing® ingenious parts |
Material | Aluminum |
Surface | anodized |
Color | black |
Carburetor type | SRE |
Ø Passage | 12.5 mm |
Accessories & related products
GPO 15 mm carburetor tuning | Puch
Nominal diameter: 15 mm · Manufacturer: GPO · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Carburetor type: SRE · Mounting type: Plug connection clamped · Width: 50 mm · Height: 95 mm · Total length: 66 mm · Nozzle thread: M3.5 · Ø Internal connection: 20 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle block: 2.17 · Clamping screw torque (max.): 4 N/m
EUR 73,20
swiing 15 mm carburetor tuning camouflaged | Puch
Manufacturer: swiing · Material: Aluminum · Camouflaged: Yes · Carburetor type: SRE · Nominal diameter: 15 mm · Mounting type: Plug connection clamped · Nozzle thread: M3.5 · Ø Internal connection: 20 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Total length: 66 mm · Height: 95 mm · Ø Air filter connection: 20 mm · Width: 50 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Area of application: Tuning · Vacuum connection: No · Choke control: Hand choke · Nozzle block: 2.17 · Clamping screw torque (max.): 4 N/m
EUR 90,10
swiing 15 mm carburetor tuning camouflaged | Sachs 503
Manufacturer: swiing · Material: Aluminum · Camouflaged: Yes · Area of application: Tuning · Carburetor type: SRE · Height: 95 mm · Nominal diameter: 15 mm · Nozzle thread: M3.5 · Ø Internal connection: 20 mm · Total length: 66 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Width: 50 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle block: 2.17 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m
EUR 90,10
Moped fans like you also bought:
BING Float cap Bing Original SRE, SRC, SRF, SRA
Manufacturer: BING · Material: Aluminum · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Height: 32.5 mm · Ø outside: 43.5 mm · Width across flats SW: 14 mm · Piaggio spare part no.: A4587 · Sachs spare part no.: 0962 056 000
EUR 21,30
swiing® revival seal Float SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Material: Sealing paper · Ø inside: 41 mm · Ø outside: 45 mm · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Thickness: 1.5 mm · Surface: blank · Pony spare part no.: A4519 · Sachs spare part no.: 0950 128 000
EUR 3,15
BING O-ring Bing SRE & 85, Ø 20 mm
Cord thickness: 1.4 mm · Manufacturer: BING · Material: Rubber · Surface: raw · Place of use: Carburetor · Color: black · Number of components: 1 pcs · Ø outside: 20 mm · Ø inside: 17.2 mm · Area of application: Standard · Pony spare part no.: A4281 · Sachs spare part no.: 0250 160 101
EUR 3,25