External ignition coil suitable for your moped, moped and small motorcycle with swiing® ingenious EVO racing ignition.
The coil comes with screwed-in ignition cable, protective cap and the required mounting parts. The ignition cable is 7 mm thick and is pulled into a protective sleeve for additional protection.
A galvanized sheet steel bracket is provided for fastening the coil; depending on the installation location, this can be dispensed with.
Attention: The swiing® ingenious EVO ignition elements are not compatible with HPI components.
Matching flywheels, stator, CDI and the complete ignition can be found in the accessories section.
Exclusive product for the highest demands of the quality brand swiing®.
Details
Manufacturer | swiing® ingenious parts |
Color | black |
Ø cable holder | 7 mm |
Total length | 80 mm |
Cable length | 480 mm |
Ø mounting hole | 6.5 mm |
Hole spacing | 62 mm |
Area of application | Tuning |
Height | 50 mm |
Number of fixing points | 2 pcs |
Mounting type | Nuts & bolts |
Suitable for the following models
Puch | |
Sachs | |
Zündapp Belmondo |
Accessories & related products
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10,20
swiing® ingenious EVO flywheel
Manufacturer: swiing® ingenious parts · Material: Steel · Direction of rotation: any · Ø cone small inside: 10.9 mm · Height: 38 mm · Ø cone large inside: 15.8 mm · Ø Flywheel outside: 75 mm · Cone length: 28 mm · Ø Internal flywheel: 63.5 mm · Cone ratio: 1:5 · Weight: 390 g · Thread type: MF26x1.5 (fine pitch thread) · Thread length: 9 mm
EUR 105,10
swiing® ingenious EVO stator
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: red · Tension: 12 V · Ø outside: 94 mm · Ø inside: 28 mm · Performance: 60 W · Number of cables: 4 pcs · Area of application: Tuning · Cable length: 620 mm · Cable length: 700 mm · Number of fixing points: 4 pcs · Ø bolt circle: 80 mm
EUR 128,50
Not in stock
Moped fans like you also bought:
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Area of application: Gearbox lubrication with clutch · Gearbox type: Manual gearshift
EUR 11,60
EUR 25,78/l
swiing® revival 17" front fender square Inox | Puch Maxi S, N
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Color: Chrome · Surface: polished · Wheel size [inch]: 17 " · Folding the ends: closed folded · Shape of the mudguard: angular · Total length over ends: 565 mm · Mounting type: Nuts & bolts · Scope: 740 mm · Wide mudguard profile: 82 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 200 mm
EUR 40,80
GPO piston 41 mm (12 mm KoBo) | Puch X30 Velux fan-cooled
Manufacturer: GPO · Ø outside piston (A): 40.94 mm · Compression height (C): 23.2 mm · Curvature (D): 3.7 mm · Total piston height (E): 49.3 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 41 mm · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring impact: Internal fuse (IS) · Ø piston pin (B): 12 mm · Piston weight: 85 g
EUR 58,30
EBR frame brace Ø 30 mm black | Puch
Manufacturer: EWC · Clamping range: 48 mm · Material: Steel · Color: black · Surface: varnished · Width: 37 mm · Width: 52 mm · Ø outside: 30 mm · Total length: 560 - 590 mm · Mounting type: Nuts & bolts · Mounting type: Plug connection · Hole spacing: 47 mm · Number of fixing points: 3 pcs · Ø mounting hole: 8 mm
EUR 51,70