Hot 
High-end full cheek crankshaft suitable for manual Sachs 50/2 (502), 50/3 (not to be confused with 503) mopeds.
High-quality and precisely fitting full cheek crankshaft weighing 1038 grams, which has proven itself in various load tests.
This crankshaft was designed for use in engines with a large power increase.
All balancing holes in the cheeks were sealed with aluminum inserts for maximum pre-compression.
The solid connecting rod is fitted with a more stable 16 mm connecting rod pin, which is hollow on the inside for better balancing.
In addition, the connecting rod bearings are silver bearings, which have excellent emergency running properties.
Dimension:
- Total length of clutch-side cheek pin: 40.7 mm
- Total length of clutch-side cheek pin: 63.4 mm
- Ø 1st shoulder (clutch-side): 15 mm
- Ø 2nd shoulder (clutch side): 12 mm
- Thread on coupling side: MF10x1 mm
- Ø Heel (coupling side): 15 mm
- Thread on clutch side: MF10x1 mm
- Ø Crank webs: 85 mm
- Width of crank webs: 30.1 mm
- Ø Connecting rod eye top: 15 mm
- Ø Connecting rod pin bottom: 16 mm
- Length of connecting rod: 85 mm
- Stroke: 42 mm
- Weight (incl. connecting rod): 1038 grams
- . Connecting rod): 1038 grams
The needle bearing (12/15 x14.2 mm) is included in the scope of delivery.
The matching bearings and oil seals can be found under accessories.
Installation tip:The transition between the crank webs and the crankpin is provided with a slight radius for reinforcement. To ensure clean spacing, a Ø 16 x 1 mm spacer washer should be used on both the left and right-hand sides; these are placed neatly over the chamfer and are therefore perfectly centered. The other spacers can be used normally with Ø 15 mm.
&Revised version of the previously offered crankshaft with additional slotted connecting rod foot for better lubrication, improved balancing ratio and thus better speed stability.
Made by the quality brand swiing – swiss ingenious.
Details
| Manufacturer | swiing |
| Weight | 1038 g |
| Cheek type | Full cheeks |
| Crankshaft stroke | 42 mm |
| Connecting rod length center-center | 85 mm |
| Total length of crankpin on clutch side | 40.7 mm |
| Total length crankpin ignition side | 63.4 mm |
| Ø crank webs | 85 mm |
| Ø Connecting rod eye | 15 mm |
| Ø piston pin (B) | 12 mm |
| Ø Bearing seat (clutch side) | 15 mm |
| Thread type | MF10x1 (fine pitch thread) |
| Ø Bearing seat (ignition side) | 15 mm |
| Area of application | High End |
| Dimension needle bearing | 12 / 15 x 14.2 mm (axe 12) |
| Wide crank webs | 30.1 mm |
Suitable for the following models
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 |
Accessories & related products
swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
Total length: 120 mm · Width across flats (trigger): 8 mm · Width across flats (trigger): 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Diameter: 24 mm · Diameter: 40.3 mm · Surface: blue galvanized · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Number of components: 1 pcs · Area of application: (Dis)assembly tool
EUR 49,50
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Ø inside: 15 mm · Bearing cage: Brass cage ball-guided · Ø outside: 35 mm · Stock number: E15 · Width: 8 mm · Inner ring width: 8 mm · Manufacturer: NSK · Bearing clearance: CN (standard) · Groove ring: No · Material: Brass · Material: Steel · Surface: blank · Bearing type: Shoulder bearing · Ball bearing closed: No · Area of application: Standard · Pony spare part no.: A1149 · Sachs spare part no.: 0232 017 006
EUR 28,10
swiing® revival shim set | Sachs 503, 502, 50/2, 50/3
Nominal diameter: 13 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: blank / oiled · Ø inside: 12.5 mm · Ø inside: 15.2 mm · Ø outside: 18 mm · Ø outside: 21 mm · Thickness: 0.1 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.4 mm · Thickness: 0.45 mm · Thickness: 0.5 mm · Thickness: 1 mm
EUR 19,00
Moped fans like you also bought:
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Ø inside: 15 mm · Bearing cage: Brass cage ball-guided · Ø outside: 35 mm · Stock number: E15 · Width: 8 mm · Inner ring width: 8 mm · Manufacturer: NSK · Bearing clearance: CN (standard) · Groove ring: No · Material: Brass · Material: Steel · Surface: blank · Bearing type: Shoulder bearing · Ball bearing closed: No · Area of application: Standard · Pony spare part no.: A1149 · Sachs spare part no.: 0232 017 006
EUR 28,10
GPO gasket set with oil seals slotted version | Sachs 50/2 engine
Manufacturer: GPO · Area of application: Standard · Ø outlet inside: 28 mm · Hole spacing inlet: 31 mm · Hole pattern [mm]: 60 x 40 · Number of components: 14 pcs · Pony spare part no.: A2582 · Sachs spare part no.: 0286 156 001
EUR 45,00
swiing® revival clutch plates (2 pcs.) | Sachs 50/2, 503 2AL/2BL (A3887)
Ø inside: 29.7 mm · Ø inside: 36 mm · Ø outside: 93.7 mm · Manufacturer: swiing® revival parts · Material: Composite materials · Material: Steel · Recording type: Interlocking · Number of slats: 2 pcs · Thickness: 3.3 mm · Area of application: Standard · Pony spare part no.: A3887 · Sachs spare part no.: 0659 010 006
EUR 29,60
swiing® revival ball bearing countershaft | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A2531)
Ø inside: 15 mm · Bearing cage: "-" Sheet steel cage ball-guided · Ø outside: 35 mm · Stock number: E15 · Width: 8 mm · Inner ring width: 25.6 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Material: Steel · Bearing type: Deep groove ball bearing · Thread type: MF20.8x1 LH (fine/left-hand thread) · Area of application: High End · Area of application: Standard · Pony spare part no.: A2531 · Sachs spare part no.: 0286 079 105
EUR 56,20
Collection only possible with online purchase and appointment.
