Base plate suitable for the three-jaw centrifugal clutch of Puch mopeds / mopeds with E50 engines.
The clutch carrier is made of steel and is elongated. The mounting pins can be secured with circlips.
Ø inner cone: 11.85 mm / 14.5 mm (1:5)
Ø outer cone: 92.6 mm
Ø mounting pin: 9.96 mm
You can find clutch linings and complete clutches in the accessories section.
Original Puch spare part number: 349.1.12.504.2
Details
Material | Steel |
Area of application | Standard |
Recording type | Cone mounting |
Number of jaws | 3 pcs |
Ø outside | 92.6 mm |
Thickness | 20.7 mm |
Ø inside | 11.85 mm, 14.5 mm |
Suitable for the following models
Puch | E50 |
Accessories & related products
swiing® ingenious clutch springs reinforced (+20%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Color: blue · Number of components: 3 pcs · Total length: 28 mm · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Area of application: Tuning
EUR 20,20
Jammer racing clutch special 65 ccm and more | Puch E50
Manufacturer: Jammer · Material: Steel · Surface: blue galvanized · Material addition: Steel · Number of springs: 3 pcs · Recording type: Cone mounting · Number of jaws: 3 pcs · Thickness: 19 mm · Ø outside: 92.5 mm · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning
EUR 214,00
EUR 281,70
HK clutch "Racing" (with additional weight) | Puch E50
Manufacturer: HK Clutches · Material: Aluminum · Material: Chrome steel (stainless steel) · Material: Steel · Material addition: Composite materials · Number of springs: 3 pcs · Recording type: Cone mounting · Number of jaws: 3 pcs · Thickness: 21.2 mm · Ø inside: 12 mm · Ø inside: 14.6 mm · Ø outside: 93 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 506,10
DMP clutch "Racing" aluminum reinforced | Puch E50
Manufacturer: DMP · Material: Steel · Material addition: Chrome steel (stainless steel) · Number of springs: 3 pcs · Recording type: Cone mounting · Number of jaws: 3 pcs · Thickness: 22 mm · Ø outside: 94 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 135,10
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Resistance: 1000 Ω · Suppressed: Yes · Pony spare part no.: A2099 · Sachs spare part no.: 0265 100 00
EUR 9,85
Magura cable clamp Ø 8 x 15 mm
Ø Bundle: 6 mm · Ø Cable bushing: 2.3 mm · Manufacturer: Magura · Thread length: 7 mm · Material: Brass · Material: Steel · Surface: blue galvanized · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Total length: 15 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Ø outside: 8 mm · Width across flats SW: 7 mm · Area of application: Standard
EUR 2,80
Magura adjusting screw brake long
Manufacturer: Magura · Thread length: 24 mm · Material: Brass · Surface: nickel-plated · Color: silver · Thread type: MF6x0.75 (fine pitch thread) · Total length: 47 mm · Total length: 65 mm · Drive: Knurled screw · Ø External head: 9.1 mm · Ø shaft: 6 mm · Shank length: 11 mm
EUR 4,40
swiing® ingenious pull starter Bosch / Ducati | Puch E50
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Color: Chrome · Color: black-matt · Ignition system: BOSCH · Ignition system: DUCATI · Total length: 160 mm · Width: 150 mm · Height: 88 mm · Number of fixing points: 2 pcs · Hole spacing: 137.5 mm · Ø outside: 130 mm
EUR 169,00
GPO Brake support bolt short Inox | Puch Maxi, Supermaxi
Manufacturer: GPO · Thread length: 13 mm · Material: Chrome steel (stainless steel) · Number of components: 3 pcs · Thread type: MF10x1 (fine pitch thread) · Total length: 32 mm · Drive: Outer edge · Ø External head: 14 mm · Shank: Yes · Ø shaft: 9.8 mm · Shank length: 9.5 mm · Width across flats SW: 13 mm · Width across flats SW: 17 mm · Area of application: Standard
EUR 14,50