Hot 
Handmade aluminum side covers for your Sachs 503 Pony Junior, Sachs 503 GT and other Sachs moped / moped models.
The side covers are of the highest quality and are an absolutely worthy alternative to the original side plates that have long been unavailable.
Every detail is almost perfectly modeled on the original. The covers can either be installed directly or painted.
Dimensions of the side panels:
Total length: 630 mm
Width: 70 mm
Distance of the mounting holes rear - center: 280 mm
Distance of the mounting holes center - front: 210 mm
To avoid any stress cracks or cracks caused by vibrations, the chain sliders should be mounted on rubber (vibration dampers).
Corresponding attachments such as clamping screw, footboard etc. can be found under accessories.
A quality product made in Switzerland.
Details
| Manufacturer | Made in Switzerland |
| Material | Aluminum |
| Color | silver |
| Surface | blank |
| Total length | 630 mm |
| Width | 70 mm |
| Height | 145 mm |
| Number of fixing points | 6 pcs |
| Ø mounting hole | 6 mm |
Suitable for the following models
| Sachs |
Accessories & related products
Hot
Rear light ULO | Sachs, Puch
Test mark: none · Material: Aluminum · Color: Chrome · Material: Steel · Color: red · Tension: 6 V · Width: 57 mm · Bulb holder: E10 · Height: 90 mm · Number of fixing points: 2 pcs · Ø Receptacle: 5 mm · Depth: 55 mm · Mounting type: Nuts & bolts · Battery operated: No
EUR 66,20
Not in stock
Moped fans like you also bought:
GPO license plate holder Inox
Manufacturer: GPO · Material: Chrome steel (stainless steel) · Color: silver · Thread type: M5x0.8 (standard thread) · Total length: 145 mm · Width: 105 mm · Height: 5.3 mm · Thread length: 8 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 30 mm · Hole spacing: 50 mm · Ø mounting hole: 5 mm
EUR 12,30
Magura set screw M6x34 mm lock nut SW8
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: blue galvanized · Surface: nickel-plated · Ø cable holder: 3.05 mm · Ø Receptacle: 7.05 mm · Thread type: M6x1 (standard thread) · Slotted: No · Thread length: 24 mm · Width across flats Screw: 8 mm · Total length: 34 mm · Width across flats nut: 8 mm
EUR 2,80
swiing® revival wheel axle M10.5x1 x 175 coaster brake galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Ø shaft: 10.5 mm · Shank length: 95.6 mm · Thread type: MF10.5x1 (fine pitch thread) · Total length: 175 mm · Thread length: 34 mm · Thread length: 45 mm
EUR 26,90
Continental 2.00 - 2.50 x 17" tube
Manufacturer: Continental · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5 · Tire height [%]: 100 · Valve type: TR6 car valve · Wheel size [inch]: 17 "
EUR 16,80
Magura cable clamp Sachs shift/clutch arm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: blue galvanized · Surface: nickel-plated · Ø Cable bushing: 2.8 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Ø outside: 7 mm · Ø Bundle: 7 mm · Width across flats SW: 6 mm · Ø shaft: 4 mm · Thread type: M4x0.7 (standard thread) · Total length: 11 mm · Thread length: 7 mm · Number of components: 2 pcs
EUR 2,80
Clamps, nipples & set screws set 73 pcs.
Storage method: Plastic box · Manufacturer: Made in Germany · Dimension storage box: 18.5 x 11.0 x 1.8 cm · Material: Brass · Material: Steel · Surface: blue galvanized · Surface: nickel-plated · Surface: raw · Drive: External hexagon · Drive: Knurled screw · Drive: Slot · Screw head: Hexagon · Number of components: 73 pcs
EUR 67,50
Collection only possible with online purchase and appointment.
