Fork uprights (pair) conditionally suitable for Sachs Pony Junior City 503 mopeds / mopeds and some other related models with 17" rims.
Length uprights: 490 mm
Total length with spring and spring mount: 575 mm
Ø fork uprights: 24.1 mm
Ø Bolt brake anchor plate: 10 mm
Lower edge of fork leg to center of bolt brake anchor plate: 95 mm
Ø Spring mount: 25 mm
Spring mount thread: M8x1.25
Top edge of fender flap to below fork leg: 102 mm
Length of fender flap: 35 mm
Hole spacing center - center of fender flap: 22 mm
Notes: The holes for the sliding bushes are 1 mm smaller than the original and may need to be drilled out. In addition, the hole in the original bars (measured from the lower edge of the bar to the middle of the hole) is 235 mm high, whereas this reproduction product is 275 mm high.
The diameter of the original bars is approx. 23.8 mm, whereas this product is approx. 24.1 mm. This means that adjustments may need to be made to the sliding bushes.
The attached tabs correspond to the design for 17" rims or mudguard arches. Pony Junior 503 models with 19" rims require adjustments to the bars or the strut for the mudguard. On the bars for the 19" models, the lugs are fitted further up as standard.
You can find more parts for your Pony Junior in the accessories section.
Details
| Material | Steel |
| Surface | chrome-plated |
| Color | Chrome |
| Adjustable | No |
| Ø spars | 24 mm |
| Total length | 490 mm, 580 mm |
| Distance brake cam to wheel axle center-center | 80 mm |
Suitable for the following models
| Sachs |
Accessories & related products
Main stand | Pony Junior 503
Manufacturer: Made in Switzerland · Material: Steel · Surface: chrome-plated · Stand base - center mount (A): 210 mm · Total width of stand base (B): 215 mm · Wide receptacle (C): 40 mm · Ø Receptacle (D): 9 mm · Spring nipple distance - center pivot axis (E): 60 mm · Wide upright foot (F): 25 mm · Total height: 233 mm · Color: Chrome
EUR 107,00
EBR fork (replica) | Pony Junior
Manufacturer: EWC · Material: Steel · Surface: chrome-plated · Surface: varnished · Adjustable: No · Thread type: FG25.4 (1" 24G) · Ø spars: 23 mm · Spar end distance (center-center): 120 mm · Ø outer head tube: 25.65 mm · Ø head tube inside: 24.3 mm · Head tube length: 205 mm · Fork bridge - center wheel axle: 375 mm · Total length: 595 mm · Distance brake cam to wheel axle center-center: 35 mm · Distance brake cam to wheel axle center-center: 85 mm · Thread length: 58 mm · Color: Chrome · Color: black
EUR 225,30
Moped fans like you also bought:
Karcoma fuel tap M12x1 vertical (with union nut) 2 connections
Manufacturer: Karcoma · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Mounting type: Union nut · Installation direction: vertical / vertical · Outlet direction: any · Thread type: MF12x1 (fine pitch thread) · Spare tube shape: straight · Ø fuel hose connection: 6 mm · Reserve level: 50 mm
EUR 25,80
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Number of components: 1 pcs
EUR 3,15
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Cable length: 2200 mm · Number of components: 1 pcs
EUR 2,70
swiing® revival seal Float SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Material: Sealing paper · Surface: blank · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Thickness: 1.5 mm · Ø inside: 41 mm · Ø outside: 45 mm · Pony spare part no.: A4519 · Sachs spare part no.: 0950 128 000
EUR 3,15
Inner cable Ø 1.2 mm x 200 cm with barrel nipple Ø 6 mm
Ø nipple: 6 mm · Nipple length: 5.5 mm · Manufacturer: Made in Germany · Material: Brass · Material: Steel · Surface: blue galvanized · Number of components: 1 pcs · Ø Stranded wire: 1.2 mm · Nipple shape: Barrel (transverse) · Cable length: 2000 mm · Area of application: Standard
EUR 3,85
Bumm mirror round Inox
Clamping diameter: 22 mm · Manufacturer: Bumm · Material: Chrome steel (stainless steel) · Material: Steel · Total length: 360 mm · Thread size: M8 · Surface: chrome-plated · Color: Chrome · Ø mirror surface: 107 mm · Ø mirror rod: 8 mm · Mirror rod length: 300 mm · Thread type: M8x1.25 (standard thread)
EUR 28,10
NSK BO15 shoulder ball bearing 15/40/10 (A4502)
Bearing cage: Brass cage ball-guided · Stock number: BO15 · Width: 10 mm · Inner ring width: 10 mm · Manufacturer: NSK · Material: Brass · Area of application: Standard · Material: Steel · Bearing type: Shoulder bearing · Surface: blank · Ø outside: 40 mm · Ø inside: 15 mm · Ball bearing closed: No · Pony spare part no.: A4502 · Sachs spare part no.: 0932 007 001
EUR 28,10
GPO sprocket 9 - 21 teeth wide | Puch
Manufacturer: GPO · Material: Steel · Surface: Hardened · Chain type: 415H · Recording type: Interlocking · Chain pitch: 1/2" x 3/16" · Number of teeth: 9 pcs · Number of teeth: 10 pcs · Number of teeth: 11 pcs · Number of teeth: 12 pcs · Number of teeth: 13 pcs · Number of teeth: 14 pcs · Number of teeth: 15 pcs · Number of teeth: 16 pcs · Number of teeth: 17 pcs · Number of teeth: 18 pcs · Number of teeth: 19 pcs · Number of teeth: 20 pcs · Number of teeth: 21 pcs · Total thickness: 4.6 mm
EUR 9,00
Collection only possible with online purchase and appointment.
