Rear wheel hub for Puch spoked wheels.
Fits Puch Maxi and X30 Sport NG-2A spoked wheels.
With pressed-in ball bearings.
Reproduction product, which is not comparable in quality to the original Puch rims.
Attention: The sprocket should always be glued to the hub with Loctite, as the threaded mounts are sometimes a little tight in diameter.
In addition, only Esjot freewheels should be used.
Good quality reproduction product from the Asian market.
Details
Manufacturer | Quenching |
Color | gray |
Suitable for the following models
Puch |
Accessories & related products
swiing® revival wheel axle set M12x1 x 185 cast rear wheel galvanized | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø outside: 11.8 mm · Total length: 185 mm · Thread type: MF12x1 (fine pitch thread) · Ø shaft: 11.9 mm · Width across flats SW: 19 mm · Thread length: 26 mm · Thread length: 52.5 mm · Shank length: 100 mm
EUR 17,40
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Contents [ml]: 10 ml · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 25,60
EUR 2.560,00/l
ESJOT freewheel 16 - 23 teeth (1A quality)
Chain pitch: 1/2" x 1/8" · Manufacturer: ESJOT · Material: Steel · Surface: Hardened · Thickness: 15 mm · Number of teeth: 16 pcs · Number of teeth: 18 pcs · Number of teeth: 20 pcs · Number of teeth: 23 pcs · Color: silver · Thread type: FG34.8 (1.37" 24G)
EUR 17,40
Moped fans like you also bought:
GPO license plate holder Inox
Manufacturer: GPO · Material: Chrome steel (stainless steel) · Color: silver · Height: 5.3 mm · Total length: 145 mm · Mounting type: Nuts & bolts · Width: 105 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Thread length: 8 mm · Ø mounting hole: 5 mm · Thread type: M5x0.8 (standard thread) · Number of fixing points: 2 pcs
EUR 12,70
Spotlight round Ø 13 cm chrome / black
Material: Sheet metal (steel) · Test mark: none · Housing material: Metal · Surface: chrome-plated · Surface: varnished · Ø outside: 130 mm · Lens material: Plastic · Width: 134 mm · Height: 147 mm · Color: Chrome · Color: black · Color: transparent · Bulb holder: BA15d · Depth: 80 mm · Speedometer recording: None · Thread size: M6 · Switch included: No · Battery operated: No · Mounting type: Screws · Area of application: Standard · Number of fixing points: 2 pcs
EUR 29,10
GPO 17" spoke set incl. nipple (2.9 x 188 mm) galvanized steel
Manufacturer: GPO · Material: Steel · Quantity: 36 pcs · Surface: galvanized (blue) · Surface: galvanized (yellow) · Length from hook: 188 mm · Ø spoke: 2.9 mm · Ø spoke head: 5.7 mm · Nominal diameter (thread): 3.2 mm · Nipple length: 14.7 mm · Ø nipple head: 8 mm · Ø Nipple neck: 5 mm · Hook length: 10.5 mm · Thread length: 11 mm · Hook angle: 92 °
EUR 33,90
Fortune / Merrick 2.00-2.50 x 16/17" inner tube
Manufacturer: Fortune · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Tire height [%]: 100 · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5 · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5 · Valve type: TR4 Auto valve · Wheel size [inch]: 16 - 17 " · Wheel size [inch]: 17 "
EUR 11,60
EBR fork reinforced & extended black | Puch
Total length: 690 mm · Manufacturer: EWC · Material: Steel · Surface: chrome-plated · Surface: varnished · Adjustable: No · Color: Chrome · Color: black · Spar end distance (center-center): 139.5 mm · Thread type: MF26x1 (fine pitch thread) · Ø outer head tube: 26.1 mm · Ø head tube inside: 21.5 mm · Ø spars: 28 mm · Head tube length: 180 mm · Thread length: 57.8 mm · Fork bridge - center wheel axle: 477 mm · Distance brake cam to wheel axle center-center: 39 mm
EUR 159,60
Rim ring 1.20 x 17" (47 mm) chrome
Material: Steel · Surface: chrome-plated · Nominal diameter: 433 mm · Rim well depth: 6 mm · Color: Chrome · Overall width outside: 47 mm · Jaw width [inch]: 1.2 " · Jaw width: 31 mm · Ø Nipple hole: 5.5 mm · Number of spoke holes: 36 pcs · Wheel size [inch]: 17 "
EUR 46,60