High-end CNC aluminum transmission cooler for your moped / moped with Puch E50 engine.
Thanks to improved cooling, the clutch works more stress-free. However, this technical miracle also lowers the temperature at the cylinder head.
All components from your original engine can be used, only the cooling fin is fitted in between. Due to the different threads, you have a variety of connection options, such as a temperature sensor.
The following components are included in the scope of delivery:
1x cooling fin, black anodized aluminium
2x seal
1x aluminium bushing
3x O-ring seal
1x hose nozzle
1x circlip / retaining ring
4x countersunk screws hexagon socket M6 x 55 (fastening of cooler / coupling cover)
Details
Material | Aluminum |
Surface | anodized |
Color | black-matt |
Ø inside | 107 mm |
Ø outside | 150 mm |
Width | 32 mm |
Suitable for the following models
Puch | E50 |
Accessories & related products
Moped fans like you also bought:
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Thread type: MF12x1 (fine pitch thread) · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 11,20
swiing® ingenious pull-wire starter PVL ignition | Puch E50
Ø outside: 130 mm · Manufacturer: swiing® ingenious parts · Hole spacing: 138 mm · Material: Plastic · Material: Steel · Color: Chrome · Surface: chrome-plated · Surface: raw · Ignition system: PVL · Width: 150 mm · Height: 80 mm · Total length: 170 mm · Number of fixing points: 2 pcs
EUR 169,00
swiing® revival set stud bolts M6 x 106 mm | Puch
Diameter: 5.9 mm · Thread type: M6x1 (standard thread) · Manufacturer: swiing® revival parts · Total length: 106 mm · Material: Steel · Surface: blue galvanized · Drive: External hexagon · Thread length: 13 mm · Thread length: 18.5 mm · Width across flats SW: 10 mm · Alternative version of the Puch spare part no.: 360.1.10.034.1
EUR 8,35
PVL ignition coil analog 105458 / 458115
Manufacturer: PVL · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning · Color: black · Mounting type: Screws · Place of use: External (outside the ignition) · Number of fixing points: 2 pcs · Ø mounting hole: 6 mm
EUR 112,40
PVL stator "1443" ignition
Manufacturer: PVL · Material: Aluminum · Area of application: High End · Area of application: MX · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Color: black · Surface: dull · Color: gray · Number of cables: 2 pcs · Number of fixing points: 3 pcs
EUR 112,40
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom | Puch Maxi S, N
Thread type: MF12x1 (fine pitch thread) · Possible lever positions: open / closed / reserve · Material lever: Aluminum · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Puch spare part no.: 349.3.22.030.0 · Puch spare part no.: 349.4.22.030.0
EUR 11,20
Polini air filter Big Evo Ø 28/35/42/45/49/55 mm straight wide
Manufacturer: Polini · Camouflaged: No · Area of application: Tuning · Color: black · Color: blue · Mounting type: Plug connection clamped · Width: 150 mm · Height: 100 mm · Filter type: Foam · Total length: 140 mm · Ø Internal connection: 28 mm · Ø Internal connection: 35 mm · Ø Internal connection: 42 mm · Ø Internal connection: 45 mm · Ø Internal connection: 49 mm · Ø Internal connection: 55 mm
EUR 67,50