Moderate Casual 
Converter unit with 100 mm pulleys without bell housing, suitable for your Piaggio Ciao (with adaptations), Si, Bravo and Boxer with variomatic drive.
Please note the following information:
- Pulley: Ø 100 mm, for mounting on a Piaggio Ciao, the pulley must be replaced or turned down to approx. 96 mm.
- The locking plate for the nut on the back of the pulleys should be bent over .
- If you have problems starting the moped, it is worth rubbing the collar of the torque converter with a little thinner to remove the protective coating (this can settle on the starting pads).
- Check whether the torque converter is rubbing against the gearbox cover. If this is the case, replace the shim inside if necessary.
Details
| Manufacturer | Olympia |
| Hardness level Counter pressure spring | Standard (30 kg - steel-colored) |
| Gearbox type | Vario |
| Ø outside | 100 mm |
Suitable for the following models
| Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao Si Bravo/Superbravo Boxer Grillo |
Accessories & related products
Hot 
swiing® ingenious pulleys Ø 96 mm | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® ingenious parts · Material: Steel · Material: special bearing bronze · Ø Outer pulley: 96 mm · Surface: gas nitrided · Gearbox type: Vario · Alternative version of Piaggio spare part no.: 103382 · Alternative version of Piaggio spare part no.: 103823 · Alternative version of Piaggio spare part no.: 220923 · Alternative version of Piaggio spare part no.: 220924
EUR 135,10
Not in stock
GPO converter with swiing® pulleys Ø 96 mm | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Manufacturer: swiing® ingenious parts · Gearbox type: Vario · Ø outside: 96 mm · Hardness level Counter pressure spring: Standard (30 kg - steel-colored) · Alternative version of Piaggio spare part no.: 104649 · Alternative version of Piaggio spare part no.: 221171
EUR 202,80
Not in stock
GPO converter with swiing® pulleys Ø 96 mm without bell housing | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Gearbox type: Vario · Ø outside: 96 mm · Hardness level Counter pressure spring: Standard (30 kg - steel-colored) · Alternative version of Piaggio spare part no.: 104649 · Piaggio spare part no.: 104649 · Alternative version of Piaggio spare part no.: 221171 · Piaggio spare part no.: 221171
EUR 169,00
Not in stock
Moped fans like you also bought:
Magura cable clamp Ø 8 x 15 mm
Ø Bundle: 6 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: blue galvanized · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Width across flats SW: 7 mm · Ø outside: 8 mm · Total length: 15 mm · Thread length: 7 mm · Area of application: Standard
EUR 2,80
GPO chain tensioner | Puch Maxi S
Manufacturer: GPO · Material: Plastic · Material: Steel · Surface: blue galvanized · Thread type: M6x1 (standard thread) · Color: black · Color: silver · Number of teeth: 10 pcs · Ø outside sprocket: 36 mm · Total length: 175 mm · Number of fixing points: 1 pcs
EUR 11,20
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut
EUR 11,20
Dell'Orto 16/16 SHA carburetor hand choke
Manufacturer: Dell'Orto · Material: Aluminum · Carburetor type: SHA (type 4) · Color: black · Nominal diameter: 16 mm · Ø without reducing sleeve: 21 mm · Ø Inside entrance: 16 mm · Ø Internal connection: 19 mm · Ø Output inside: 16 mm · Ø Air filter connection: 56 mm · Ø Air filter connection: 58.5 mm · Ø fuel hose connection: 5.1 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Width: 72 mm · Vacuum connection: No · Total length: 82 mm · Choke control: Hand choke · Nozzle thread: M5 · Camouflaged: No · Nozzle size: 82 · Height: 111 mm · Area of application: Tuning
EUR 78,80
Collection only possible with online purchase and appointment.
