Gas-nitrided torque converter pulleys made of reinforced special steel and a precisely fitting bearing bush for your Piaggio Ciao, Si, Bravo and Boxer moped / moped with variomatic drive.
In the depths of the Italian Dolomites, under the patronage of a legendary pizzaiolo, after two years of development and the strictest quality control, an almost perfect torque converter pulley was born that will leave even the most convinced flatearthers open-mouthed with amazement. This masterpiece of engineering, created by Tomasu Buono himself, has undergone so many optimizations that it could not only take your plane to the moon, but even to Mars faster than many a known billionaire - at least in theory.
The angles and shapes of the torque converter pulleys have been optimized to perfection in order to get the maximum speed out of the variator. Special care has been taken to ensure that the belt path on the pulleys is perfectly matched to racing variators so that you can reach top speeds even with short gear ratios of 12.5/1, 13.3/1 and 14.8/1. The high-quality surface coating makes a decisive contribution to smooth and even operation.
No adjustments to the frame, converter or pulleys are necessary; installation is plug & play. Even with Ciao models, thanks to the selected diameter of 96 mm, no machining of the frame with a Dremel or Flex is required.
Details
| Manufacturer | swiing® ingenious parts |
| Ø Outer pulley | 96 mm |
| Material | Steel, special bearing bronze |
| Surface | gas nitrided |
| Gearbox type | Vario |
| Alternative version of the Piaggio OEM number | 220924, 220923, 103823, 103382 |
Suitable for the following models
| Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao Si Bravo/Superbravo Boxer |
Accessories & related products
Stage6 vario weight set Ø 16 x 13 mm / 6.5 - 9.5 g
Manufacturer: Stage6 · Gearbox type: Vario · Number of weights: 24 pcs · Weight Standard weights: 6.5 g · Weight Standard weights: 7.5 g · Weight Standard weights: 8.5 g · Weight Standard weights: 9.5 g · Ø Weights: 16 mm · Length Weights: 13 mm
EUR 38,60
Not in stock
GPO converter with swiing® pulleys Ø 96 mm | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Manufacturer: swiing® ingenious parts · Gearbox type: Vario · Ø outside: 96 mm · Hardness level Counter pressure spring: Standard (30 kg - steel-colored) · Alternative version of the Piaggio OEM number: 104649 · Alternative version of the Piaggio OEM number: 221171
EUR 210,90
Not in stock
GPO converter with swiing® pulleys Ø 96 mm without bell housing | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Gearbox type: Vario · Ø outside: 96 mm · Hardness level Counter pressure spring: Standard (30 kg - steel-colored) · Alternative version of the Piaggio OEM number: 104649 · Piaggio OEM number: 104649 · Alternative version of the Piaggio OEM number: 221171 · Piaggio OEM number: 221171
EUR 175,70
Not in stock
Moped fans like you also bought:
Not so nice 
15 mm intake manifold | Puch E50
Material: Aluminum · Area of application: Tuning · Camouflaged: Yes · Ø inside: 14.5 mm · Hole spacing inlet: 38 mm · Total length: 47 mm · Mounting type: Screws · Height flange center hole: 43 mm · Ø External connection: 20 mm · Number of fixing points: 2 pcs · Total height: 54 mm
EUR 14,10
Fortune / Merrick 2.00-2.50 x 16/17" inner tube
Manufacturer: Fortune · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Tire height [%]: 100 · Wheel size [inch]: 16 - 17 " · Wheel size [inch]: 17 " · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5 · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5 · Valve type: TR4 Auto valve
EUR 11,60
Hot 
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Tension: 12 V · Width: 27 mm · Type of current: Alternating current (AC) · Total length: 50 mm · Performance: 100 W · Ø mounting hole: 6 mm · Height: 15 mm · Mounting type: Screws
EUR 40,90
Hot
Leonelli 6V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Tension: 6 V · Width: 27 mm · Type of current: Alternating current (AC) · Performance: 50 W · Total length: 50 mm · Ø mounting hole: 6 mm · Height: 15 mm · Mounting type: Screws
EUR 35,10
Collection only possible with online purchase and appointment.
