Shaft seal ring 17x35x7 mm for use on your Puch X30 moped / moped.
The seal ring is used in the following engines:
- On the Z50 engine of Puch X30 Sport / Puch X30 Velux mopeds on the left and right side of the crankshaft (2 pieces).
- For the ZA50 engine of Puch X30 NG-2A mopeds on the crankshaft end (1 piece).
Ø inner: 17 mm
Ø outer: 35 mm
Width: 7 mm
Material: NBR
Temperature resistant: approx. -30 to +100 °C, briefly up to 120 °C
Type: AS - With rubberized outer casing, one sealing lip and one dust lip.
Details
| Temperature resistance (min.) | -30 - 100 °C |
| Simmering type | AS - With rubberized outer casing / one sealing lip / one dust lip. |
| Manufacturer | Puch |
| Place of use | Crankshaft |
| Material | NBR |
| Surface | rubberized |
| Width | 7 mm |
| Ø inside | 17 mm |
| Ø outside | 35 mm |
Suitable for the following models
| Puch | ZA50 (Fahrtwindgekühlt) ZA50 (Gebläsegekühlt) Z50 (X30 Sport) Z50 (X30 Velux) 2-Gang MS, MV, MV50 3-Gang VSD, DS, VZ, MC |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Contents [ml]: 10 ml · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 25,70
EUR 2.570,00/l
Oil seal NBR 17/35/7 A DUO crankshaft | Puch Z50, ZA50
Place of use: Crankshaft · Temperature resistance (min.): -30 - 100 °C · Simmering type: A DUO - With rubberized outer casing / two sealing lips. · Ø inside: 17 mm · Ø outside: 35 mm · Width: 7 mm · Manufacturer: Puch · Material: NBR · Surface: rubberized
EUR 8,70
Not in stock
Moped fans like you also bought:
NSK E20 shoulder ball bearing
Stock number: E20 · Inner ring width: 12 mm · Manufacturer: NSK · Bearing clearance: CN (standard) · Bearing cage: Brass cage ball-guided · Material: Brass · Surface: blank · Ø inside: 20 mm · Bearing type: Deep groove ball bearing · Width: 12 mm · Ø outside: 47 mm · Ball bearing closed: No
EUR 29,20
NSK L17 shoulder ball bearing
Stock number: L17 · Inner ring width: 10 mm · Manufacturer: NSK · Bearing clearance: CN (standard) · Bearing cage: Brass cage ball-guided · Material: Brass · Material: Steel · Surface: blank / oiled · Ø inside: 17 mm · Bearing type: Shoulder bearing · Width: 10 mm · Ø outside: 40 mm · Ball bearing closed: No · Area of application: Standard
EUR 22,90
Oil seal NBR 17/28/7 AS Pinion shaft | Puch Z50
Simmering type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Manufacturer: Puch · Material: NBR · Surface: rubberized · Place of use: Pinion shaft · Width: 7 mm · Ø inside: 17 mm · Area of application: Standard · Ø outside: 28 mm · Temperature resistance (min.): -30 - 100 °C
EUR 5,75
Oil seal NBR 20/35/7 AS crankshaft | Puch ZA50
Material: NBR · Manufacturer: Puch · Surface: rubberized · Temperature resistance (min.): -30 - 100 °C · Simmering type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Place of use: Crankshaft · Ø inside: 20 mm · Ø outside: 35 mm · Width: 7 mm
EUR 6,90
Oil seal NBR 20/35/7 A DUO crankshaft | Puch ZA50
Place of use: Crankshaft · Temperature resistance (min.): -30 - 100 °C · Simmering type: A DUO - With rubberized outer casing / two sealing lips. · Ø inside: 20 mm · Ø outside: 35 mm · Width: 7 mm · Manufacturer: Puch · Material: NBR · Surface: rubberized
EUR 9,25
Collection only possible with online purchase and appointment.
