Replaced NGK BR8ES spark plug with long thread suitable for various mopeds, mopeds or small motorcycles.
This spark plug fits the following mopeds: Alpa Cross 2000, Alpa Grand Sport, Alpa Cristall 50/2, Alpa Panda, Cilo Cross, KTM GTX 503, Pony GT Cross, Pony GTA, Pony GTX, Pony Junior 50/2, Pony Junior 503, Puch Maxi S, Puch Maxi N, Puch Maxi N Chopper, Puch Maxi Plus, Puch X30 Sport NS / NL, Puch X30 Velux, Puch Supermaxi, Sachs Rixe 50/2, Sachs Turbo, Sachs 503 etc. Among other things, long-threaded plugs are installed on Piaggio mopeds with 43 or 46 mm cylinder heads from Malossi (from 2021).
R = de-routed version.
Note: For an official MFK approval, it is necessary that the ignition system has a de-rotated component. This spark plug is deflashed and can therefore be combined with a non-deflashed spark plug connector on public roads. Before purchasing, use the downloadable spark plug overview to check which type is best suited to your setup.
Alternative plugs and connection material for your ignition system can be found in the accessories section.
Quality product from the Japanese manufacturer NGK.
Details
Manufacturer | NGK |
Candle designation | BR8ES |
Candle thread type | long |
Spark plug socket | M4 |
Thread type | MF14x1.25 (fine pitch thread) |
Suppressed | Yes |
Width across flats SW | 21 mm |
Area of application | Performance |
Accessories & related products
Spark plug connector / not suppressed | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Made in Italy · Material: Phenolic resin (known as Bakelite®) · Color: black · Cable available: No · Spark plug socket: SAE · Suppressed: No · Component group Carburetor: Spraying · Ø cable: 5 mm · Ø cable: 7 mm
EUR 10,70
Not in stock
Moped fans like you also bought:
GPO ignition coil CDI | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Ø cable holder: 7.9 mm · Color: black · Place of use: External (outside the ignition) · Total length: 95 mm · Height: 35.5 mm · Ø mounting hole: 5.7 mm · Area of application: Original · Area of application: Performance · Area of application: Standard · Cable length: 192 mm · Mounting type: Screws · Hole spacing: 33 mm · Number of fixing points: 2 pcs
EUR 46,10
Malossi cylinder head for 44 - 47 mm cylinder kit | Piaggio Ciao, Bravo 1, Boxer
Manufacturer: Malossi · Material: Aluminum · Surface: sandblasted · Ø cylinder: 44 - 47 mm · Camouflaged: No · Number of fixing points: 3 pcs · Hole pattern [mm]: 35 x 55 · Candle thread: long · Decompressor: Yes · Total length: 122 mm · Width: 87 mm · Height: 60 mm · Area of application: Racing
EUR 92,30
Malossi 46.5 mm cylinder kit without head 10 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
Nominal diameter: 46.5 mm · Manufacturer: Malossi · Material: Gray cast iron · Displacement: 73 ccm · Surface: sandblasted · Crankshaft stroke: 43 mm · Ø cylinder neck: 50 mm · Ø Outlet outside: 22.4 mm · Ø outlet inside: 18.1 mm · Area of application: Tuning · Ø piston pin (B): 10 mm · Outlet type: clamped · Number of fixing points: 3 pcs · Hole pattern [mm]: 55 x 34 · Decompressor: Yes · Camouflaged: No
EUR 167,30
Polini Speed Engine electronic ignition housing | Piaggio Ciao, SI, Bravo, Boxer
Stock number: 6202 · Manufacturer: Polini · Material: Aluminum · Color: silver · Surface: sandblasted · Crankshaft stroke: 43 mm · Total length: 215 mm · Ignition type: Electronic · Height: 104 mm · Width: 175 mm
EUR 247,70