Parts from HPI
Horse Power Ignition (HPI) - Maximum power for your moped with racing ignitions and tuning parts from Belgium
For tuning enthusiasts, HPI is one of the top addresses when it comes to getting the most out of their mopeds. With the innovative ignition components from Bree, moped tuning becomes really smart.
HPI flywheel (Bosch/Ducati)
Manufacturer: HPI · Material: Steel · Direction of rotation: left · Direction of rotation: right · Ø cone small inside: 10.9 mm · Ø cone large inside: 15.8 mm · Ø Flywheel outside: 71.5 mm · Cone length: 28 mm · Thread type: MF27x1 LH (fine/left-hand thread) · Cone ratio: 1:5
EUR 112,40
HPI stator ignition
Manufacturer: HPI · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Surface: anodized · Tension: 12 V · Ø outside: 90 mm · Material: Aluminum · Performance: 60 W · Color: black · Number of cables: 4 pcs · Cable length: 640 mm · Ø inside: 27.5 mm · Number of fixing points: 6 pcs · Ø bolt circle: 80 mm
EUR 175,70
HPI racing ignition 12V with light 60W | Sachs 504, 508
Manufacturer: HPI · Material: Aluminum · Material: Steel · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 82 mm · Ø Internal flywheel: 61.5 mm · Ø Flywheel outside: 71.5 mm · Ø cable: 7 mm · Mounting type: Screws · Number of fixing points: 4 pcs · Weight: 344 g · Area of application: Tuning
EUR 375,00
HPI racing ignition 12V with light breaker housing | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: HPI · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: right · Ø mounting plate: 90 mm · Ø Internal flywheel: 61.5 mm · Ø Flywheel outside: 140 mm · Ø cable: 7 mm · Mounting type: Screws · Number of fixing points: 4 pcs · Area of application: Tuning
EUR 410,20
Hot 
HPI ignition box programmable (two ignition curves)
Manufacturer: HPI · Material: Plastic · Color: red · Height: 28 mm · Total length: 63 mm · Number of fixing points: 2 pcs · Width: 100 mm · Ø mounting hole: 7.5 mm · Hole spacing: 80 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 360,40
Page 1 of 2
Innovative ignition components from Horse Power Ignition for clever tuning
If you prefer to go a little faster on your moped, you will of course want to tweak a few things to get more and more power out of it. In addition to the usual suspects such as racing carburettors, tuning cylinders or resonance exhausts, a considerable increase in performance can be achieved with ignition components from the racing specialist HPI. If you are active in racing, then the programmable HPI internal rotor ignition is an absolute must for you. But also for hobbyists who like to ride their mopeds in a sporty way, the ignition components from the Belgian tuning specialist HPI are an attractive and smart way to raise the maximum speed to unprecedented heights. So there's no question that we offer you ignitions and accessories from the renowned tuning company in our range.
Smart performance boost with racing ignitions from HPI
With HPI racing ignitions you can optimise the throttle response and acceleration of your moped by adjusting the electronics and also bypass the rev limiter of your engine. In this way, you can tease the full potential out of your moped with an HPI ignition. This form of tuning is particularly smart and attractive because you can also achieve a considerable increase in performance on an unmodified moped in this way. If you use an HPI racing ignition on your moped together with other tuning components such as a larger carburettor, a tuning cylinder or an optimised exhaust system, the power output from the new ignition is of course significantly higher. The use of a programmable ignition box from Horse Power Ignition promises an even greater increase in performance. With its help, you can set two individual ignition curves for your moped. This allows you to cruise on the road with reduced power and call up full power on the racetrack.
Extra horsepower for racing and tuning sports for more than 30 years
The Belgian tuning specialist has built up an excellent reputation with high-quality special components and innovations such as the HPI racing ignition. Since the company was founded in the early 1990s, the Belgian tuning company has been constantly developing new and powerful ignition components for mopeds and motorbikes as well as chip tuning kits for car tuning. Thanks to close co-operation with professional racing teams, experience from racing is constantly being incorporated into the further development of the products. Over the last few decades, the tuning specialists from Bree in Belgium have continuously expanded their portfolio of tuning components. Since then, the company's products have also included flywheels and light coils as well as ignition coils for two and four-wheeled vehicles. Strict quality control during production ensures that you can safely and reliably achieve the performance you want from your moped with HPI products.
Related & alternative part manufacturers
Collection only possible with online purchase and appointment.
