Not so nice 
Center stay (stay) suitable for Puch Maxi S / P1, Puch X30 NS / NL / NG mopeds and mopeds.
The chrome-plated center stay requires minor adjustments in the area of the stop plates.
Total height (A): 20 cm
Spring nipple height (B): 12 cm
Width of base (C): 4.5 cm
Width of mount (D): 6.7 cm
Mäsig-läsig! – We strive to offer you the widest range of moped spare parts. However, this product is of rather poor quality and is not recommended by us. Should you nevertheless choose this item, we understand, but cannot offer you any guarantee or exchange.
The high-quality alternative, as well as corresponding add-on parts such as strut springs, bearing shells, etc. can be found in the accessories section.
Details
| Material | Steel |
| Surface | chrome-plated |
| Color | Chrome |
| Wide receptacle (C) | 67 mm |
| Spring nipple distance - center pivot axis (E) | 120 mm |
| Wide upright foot (F) | 45 mm |
| Total height | 200 mm |
Suitable for the following models
| Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) |
Accessories & related products
swiing® revival upright spring blue galvanized | Puch
Spring design: Tension spring · Length spring hook: 19 mm · Length spring hook: 53 mm · Ø wire: 2.5 mm · Ø inside: 9 mm · Manufacturer: swiing® revival parts · Ø outside: 14 mm · Total length: 122 mm · Material: Spring steel · Surface: galvanized (blue)
EUR 3,10
swiing® revival stand spring Inox | Puch
Spring design: Tension spring · Length spring hook: 19 mm · Length spring hook: 53 mm · Ø wire: 2.5 mm · Ø inside: 9 mm · Manufacturer: swiing® revival parts · Ø outside: 14 mm · Total length: 122 mm · Material: Chrome steel (known as Nirosta®) · Surface: raw
EUR 6,80
Solid galvanized main stand | Puch Maxi S
Manufacturer: Made in Switzerland · Material: Steel · Surface: chrome-plated · Color: Chrome · Stand base - center mount (A): 210 mm · Total width of stand base (B): 275 mm · Wide receptacle (C): 86 mm · Ø Receptacle (D): 10 mm · Spring nipple distance - center pivot axis (E): 115 mm · Wide upright foot (F): 30 mm · Wide upright foot (F): 70 mm · Total height: 220 mm
EUR 114,20
swiing® revival screw set mounting stand Inox | Puch
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Surface: raw · Area of application: Standard · Thread type: M6x1 (standard thread) · Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 10 mm · Thread length: 17.5 mm · Shank: Yes · Number of components: 12 pcs · Color: silver
EUR 7,95
Buzzetti main stand black (1A quality) | Puch Maxi S, P1 | X30 NS, NL, NG
Manufacturer: Buzzetti · Material: Steel · Surface: powder-coated · Color: black · Stand base - center mount (A): 200 mm · Total width of stand base (B): 230 mm · Wide receptacle (C): 63 mm · Ø Receptacle (D): 18.1 mm · Spring nipple distance - center pivot axis (E): 100 mm · Wide upright foot (F): 30 mm · Wide upright foot (F): 45 mm · Total height: 215 mm · Puch OEM number: 349.3.24.500.2
EUR 73,60
Buzzetti main stand extended black (1A quality) | Puch Maxi S, P1 | X30 NS, NL, NG
Manufacturer: Buzzetti · Material: Steel · Surface: powder-coated · Color: black · Stand base - center mount (A): 225 mm · Total width of stand base (B): 235 mm · Wide receptacle (C): 63 mm · Ø Receptacle (D): 18.5 mm · Spring nipple distance - center pivot axis (E): 100 mm · Wide upright foot (F): 30 mm · Wide upright foot (F): 50 mm · Total height: 240 mm · Puch OEM number: 321.2.24.001.2
EUR 73,60
Moped fans like you also bought:
swiing® revival upright spring blue galvanized | Puch
Spring design: Tension spring · Length spring hook: 19 mm · Length spring hook: 53 mm · Ø wire: 2.5 mm · Ø inside: 9 mm · Manufacturer: swiing® revival parts · Ø outside: 14 mm · Total length: 122 mm · Material: Spring steel · Surface: galvanized (blue)
EUR 3,10
swiing® revival 17" front fender square Inox | Puch Maxi S, N
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Surface: polished · Color: Chrome · Wheel size [inch]: 17 " · Folding the ends: closed folded · Shape of the mudguard: angular · Total length over ends: 565 mm · Scope: 740 mm · Wide mudguard profile: 82 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 200 mm · Mounting type: Nuts & bolts
EUR 40,30
BOSCH Breaker with cable | Bosch / Ducati
Manufacturer: BOSCH · Material: Steel · Ø axle: 4 mm · Ø mounting hole: 4.5 mm · Cable available: Yes · Number of fixing points: 1 pcs · Area of application: Original · Area of application: Standard · Cable length: 100 mm · Ø Internal flywheel: 90 mm · Alternative version of the Pony OEM number: A4606 · Alternative version of the Pony OEM number: A4606A · Pony OEM number: A4607 · Alternative version of the Sachs OEM number: 0983 106 000 · Alternative version of the Sachs OEM number: 2783 039 001 · BOSCH OEM number: 1 217 013 025 · Sachs OEM no.: 0283 116 102 · BERU OEM number: 0 340 100 710
EUR 22,90
GPO gasket set carburetor Bing SRE
Manufacturer: GPO · Camouflaged: No · Material: Sealing paper · Component group Carburetor: Sealing, revising · Carburetor type: SRE · Thickness: 0.5 mm · Thickness: 0.9 mm · Thickness: 1.5 mm · Ø inside: 7.8 mm · Ø inside: 41 mm · Ø outside: 12.2 mm · Ø outside: 45 mm
EUR 5,65
swiing® revival stand spring Inox | Puch
Spring design: Tension spring · Length spring hook: 19 mm · Length spring hook: 53 mm · Ø wire: 2.5 mm · Ø inside: 9 mm · Manufacturer: swiing® revival parts · Ø outside: 14 mm · Total length: 122 mm · Material: Chrome steel (known as Nirosta®) · Surface: raw
EUR 6,80
GPO pedal cranks chrome (pair) | Puch
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 180 mm · Crank length (center-center): 156 mm · Wide intake: 28 mm · Ø Pedal wedge: 9.5 mm · Ø Pedal axle: 16 mm · Cranking (offset): 37 mm · Cranking (offset): 49 mm · Thread type: FG14.3 (9/16" 20G)
EUR 86,50
DUCATI ignition coil (1A quality)
Manufacturer: DUCATI · Place of use: Internal (in the ignition) · Ø Internal flywheel: 90 mm · Ø cable holder: 5.9 mm · Cable length: 37 mm · Color: black · Total length: 76.5 mm · Height: 17 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Ø mounting hole: 4.6 mm · Hole spacing: 54 mm · Area of application: Original · Area of application: Standard · Alternative version of the Pony OEM number: A2116 · Alternative version of the Pony OEM number: A2118 · Pony OEM number: A2114 · Pony OEM number: A5524 · Alternative version of the Sachs OEM number: 0265 142 002 · Alternative version of the Sachs OEM number: 0265 142 004 · Sachs OEM no.: 0265 132 100 · Sachs OEM no.: 0265 203 001
EUR 74,90
Collection only possible with online purchase and appointment.
