Oldie luggage carrier with clamp for your older Piaggio Ciao P moped / moped.
The rear luggage carrier is only suitable for the old model with rigid, square seat post and rear light on the mudguard.
Mounting takes place at the original attachment points under the saddle and on the screws of the seat stays. The tool compartment remains accessible.
Total length: 500 mm
Width: 165 mm
Height: 100 mm
Fixing distance front: 60 mm
Fixing distance rear: 131 mm
Length of luggage carrier clamp: 220 mm
Matching luggage bags as well as an alternative luggage carrier can be found in the accessories section.
A quality product made in Italy.
Details
Manufacturer | Made in Italy |
Material | Steel |
Color | Chrome |
Surface | chrome-plated |
Total length | 500 mm |
Ø mounting hole | 6.5 mm, 9 mm |
Hole spacing | 60 mm, 131 mm |
Width | 165 mm |
Height | 100 mm |
Number of fixing points | 4 pcs |
Mounting type | Screws, Nuts & bolts |
Suitable for the following models
Piaggio | Ciao - Ciao |
Accessories & related products
Luggage carrier Classic Chrome | Piaggio Ciao P
Manufacturer: Made in Italy · Material: Steel · Color: Chrome · Surface: chrome-plated · Width: 140 mm · Total length: 575 mm · Height: 100 mm · Mounting type: Nuts & bolts · Mounting type: Screws · Hole spacing: 85 mm · Hole spacing: 135 mm · Number of fixing points: 4 pcs · Ø mounting hole: 6.5 mm · Piaggio OEM number: 114151
EUR 128,50
Moped fans like you also bought:
GPO license plate holder Inox
Manufacturer: GPO · Material: Chrome steel (stainless steel) · Color: silver · Width: 105 mm · Total length: 145 mm · Height: 5.3 mm · Mounting type: Nuts & bolts · Hole spacing: 30 mm · Hole spacing: 50 mm · Thread type: M5x0.8 (standard thread) · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Thread length: 8 mm
EUR 12,70
Dell'Orto 16/16 SHA carburetor hand choke
Manufacturer: Dell'Orto · Material: Aluminum · Component group Carburetor: Carburetor complete · Color: black · Carburetor type: SHA · Nominal diameter: 16 mm · Ø Internal connection: 19 mm · Ø without reducing sleeve: 21 mm · Ø Inside entrance: 16 mm · Ø Output inside: 16 mm · Total length: 82 mm · Area of application: Tuning · Ø Air filter connection: 56 mm · Ø Air filter connection: 58.5 mm · Ø fuel hose connection: 5.1 mm · Ø fuel hose connection: 6 mm · Width: 72 mm · Mixed oil connection: No · Height: 111 mm · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No · Nozzle size: 82 · Mounting type: Plug connection clamped
EUR 81,70
Karcoma fuel filter plastic small
Manufacturer: Karcoma · Material: Plastic · Color: transparent · Color: white · Ø outside: 20 mm · Ø inside: 3 mm · Filter type: Plastic net · Total length: 23.4 mm · Total length: 50 mm · demountable: No · Ø fuel hose connection: 4.9 mm · Ø fuel hose connection: 6 mm
EUR 6,80
Dell'Orto 90° carburetor pipe bend set M6x0.75
Manufacturer: Dell'Orto · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Ø outside: 6 mm · Angle: 90 ° · Total length: 43 mm · Total length: 52 mm · Height: 27 mm · Internal thread: MF5x0.75 (fine pitch thread) · Thread type: MF6x0.75 (fine pitch thread) · Width across flats nut: 7 mm
EUR 13,90
Mitas 2.25 x 16" tires B8 Allround whitewall
Manufacturer: Mitas · Tire width [inch]: 2.25 " · Width [inch]: 2 1/4 · Wheel size [inch]: 16 " · Old designation: 20 x 2.25 · Speed index: J = 100 km/h · Load capacity index: 38 = 132 kg · Profile type: B8 · Tire type: Allround · Color: black · Color: white · White wall: Yes · Tubeless (yes/no): Tubetype TT (requires hose)
EUR 70,00
Not in stock
Siem headlight gray | Piaggio Ciao C9, C7
Manufacturer: Siem · Bulb holder: P26s · Housing material: Plastic · Color: gray · Color: white · Mounting type: Screws · Area of application: Original · Thread size: M6 · Speedometer recording: None · Test mark: none · Switch included: Yes · Battery operated: No · Number of fixing points: 2 pcs · Piaggio OEM number: 114427
EUR 77,00
swiing® revival screw set fan cover galvanized | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Number of components: 8 pcs · Drive: Cross recess · Screw head: Panhead · Area of application: Standard · Thread type: M5x0.8 (standard thread)
EUR 5,70