Practical travel bag for mounting on the luggage rack of your Piaggio Ciao moped / moped.
The shapely single bag made of gray imitation leather and red textile cover can be mounted on the side of the luggage rack. To do this, the sacoche is simply hooked into the luggage rack bar and attached to the strut or frame using the tension spring. The luggage bag can also be attached to additional luggage racks with round bars up to Ø 13 mm.
The tool bag impresses with its good quality. On the spoked wheel models with the old luggage carrier shape, the fit is very good; on newer models, the middle hook with the spring may need to be modified or padded (presses on the strut of the luggage carrier).
Dimensions of the individual side bag:
Length: 31 cm
Width: 9.5 cm
Height: 23 cm
Hook spacing: 12.5 - 16.5 cm
You can find more transport bags in the accessories section.
Details
| Mounting type | suspended |
| Material | Imitation leather, Textile |
| Color | red, gray |
| Number of fixing points | 5 pcs |
| Hook distance | 125 mm, 165 mm |
| Total length | 310 mm |
| Width | 95 mm |
| Height | 230 mm |
Suitable for the following models
| Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao |
Accessories & related products
Luggage carrier Classic Chrome | Piaggio Ciao P
Manufacturer: Made in Italy · Material: Steel · Surface: chrome-plated · Ø mounting hole: 6.5 mm · Total length: 575 mm · Number of fixing points: 4 pcs · Height: 100 mm · Width: 140 mm · Mounting type: Nuts & bolts · Mounting type: Screws · Hole spacing: 85 mm · Hole spacing: 135 mm · Color: Chrome · Piaggio spare part no.: 114151
EUR 123,90
Luggage carrier chrome | Piaggio Ciao P
Manufacturer: Made in Italy · Material: Steel · Surface: chrome-plated · Ø mounting hole: 6.5 mm · Ø mounting hole: 9 mm · Total length: 500 mm · Number of fixing points: 4 pcs · Height: 100 mm · Width: 165 mm · Mounting type: Nuts & bolts · Mounting type: Screws · Hole spacing: 60 mm · Hole spacing: 131 mm · Color: Chrome
EUR 112,60
Moped fans like you also bought:
Clutch cable / brake cable Ø 1.5 mm x 225 cm (pear-shaped nipple)
Ø Stranded wire: 1.5 mm · Cable length: 2250 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Number of components: 1 pcs · Piaggio spare part no.: 270460
EUR 2,70
Stand set | Piaggio SI
Manufacturer: Made in Italy · Material: Steel · Surface: varnished · Color: black · Stand base - center mount (A): 225 mm · Total width of stand base (B): 220 mm · Wide receptacle (C): 89 mm · Ø Receptacle (D): 14 mm · Wide upright foot (F): 20 mm · Total height: 265 mm
EUR 28,10
Fuel tap vertical M12x1 (with union nut) outgoing right | Piaggio SI
Manufacturer: Made in Italy · Possible lever positions: open / closed / reserve · Material lever: Plastic · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: vertical / vertical · Outlet direction: right · Spare tube shape: straight · Ø fuel hose connection: 6 mm · Reserve level: 65 mm · Mounting type: Union nut
EUR 14,00
swiing® revival clamping screw front brake (version 2.0) | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Thread type: M7x1 (standard thread) · Number of components: 3 pcs · Ø Cable bushing: 2.1 mm · Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 11 mm · Width across flats SW: 14 mm · Ø shaft: 10.9 mm · Total length: 21 mm · Thread length: 9.5 mm
EUR 6,10
Collection only possible with online purchase and appointment.
