Rubber grommet for the ignition cable on Sachs 50/2 engines.
The ignition cable is pulled through this rubber grommet.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Original Sachs spare part number A1922
Details
Manufacturer | GPO |
Material | Rubber |
Color | black |
Pony spare part no. | A1922 |
Sachs spare part no. | 0260 018 100 |
Suitable for the following models
Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 |
Moped fans like you also bought:
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Bearing cage: Brass cage ball-guided · Stock number: E15 · Inner ring width: 8 mm · Manufacturer: NSK · Bearing clearance: CN (standard) · Groove ring: No · Material: Brass · Material: Steel · Surface: blank · Bearing type: Shoulder bearing · Width: 8 mm · Ø outside: 35 mm · Ø inside: 15 mm · Ball bearing closed: No · Area of application: Standard · Pony spare part no.: A1149 · Sachs spare part no.: 0232 017 006
EUR 28,10
Rubber grommet round 2 cables | Sachs 502, 503, 504 (A1923)
Total length: 7 mm · Ø Bundle: 10.5 mm · Waistband height: 2 mm · Material: Rubber · Area of application: Standard · Surface: raw · Color: black · Ø outside: 12.8 mm · Ø Cable bushing: 2.2 mm · Ø mounting hole: 8.5 mm · Pony spare part no.: A1923 · Sachs spare part no.: 0260 020 000
EUR 5,50
swiing® revival sealing rubber blower cover black | Sachs 50/2, 50/3, 50/4 (A1938)
Manufacturer: swiing® revival parts · Material: Polyvinyl chloride (PVC-U_hard) · Surface: raw · Color: black · Ø inside: 16.95 mm · Ø outside: 22.1 mm · Ø mounting hole: 17 mm · Total length: 7.9 mm · Ø Bundle: 20.5 mm · Waistband height: 2 mm · Material thickness: 7.8 mm · Area of application: Standard · Pony spare part no.: A1938 · Sachs spare part no.: 0260 044 000
EUR 8,90
Flat nut M21x1 LH clutch | Sachs 50/2, 503 AB/ABL/2AL/2BL (A1504)
Nut type: Hexagon flat nut · Thread type: MF21x1 LH (fine/left-hand thread) · Drive: External hexagon · Width across flats SW: 26 mm · Pony spare part no.: A1504 · Sachs spare part no.: 0242 030 005 · Sachs spare part no.: 0242 030 105
EUR 8,45
swiing® revival clutch plates (2 pcs.) | Sachs 50/2, 503 2AL/2BL (A3887)
Manufacturer: swiing® revival parts · Material: Composite materials · Material: Steel · Area of application: Standard · Recording type: Interlocking · Ø inside: 29.7 mm · Ø inside: 36 mm · Ø outside: 93.7 mm · Number of slats: 2 pcs · Thickness: 3.3 mm · Pony spare part no.: A3887 · Sachs spare part no.: 0659 010 006
EUR 29,60
swiing® revival ball bearing countershaft | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A2531)
Bearing cage: "-" Sheet steel cage ball-guided · Stock number: E15 · Width: 8 mm · Inner ring width: 25.6 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Area of application: High End · Area of application: Standard · Material: Steel · Bearing type: Deep groove ball bearing · Ø outside: 35 mm · Ø inside: 15 mm · Thread type: MF20.8x1 LH (fine/left-hand thread) · Pony spare part no.: A2531 · Sachs spare part no.: 0286 079 105
EUR 56,20