Mediterranean 41 mm cast iron racing cylinder with 55 cc for your Sachs moped / moped with 503 2AL, AAL, 2BL, ABL CH engine.
The GPO Pomodoro cylinder kit (Italian for tomato) is the sun-ripened, refreshing alternative to comparable greenhouse racing cylinders. It impresses with its freshness in the lower rev range, powerful acceleration and pulling power, as well as a fruity finish in the upper rev range. The cylinder absorbs more nutrients than original ones, transforming them into juicy, powerful pulp and exuding a tantalizing aroma of oil. A real treat for your engine that fills the streets with passionate flavors.
Details:
Differences to the original BADASS cylinder:
Due to the correct angle of the intake surface, both original and swiing® brand intake manifolds and carburettors fit under the side valving without the need for adjustments.
The GPO piston improves intake timing, resulting in higher engine speeds. The edges of all ports are smoothed, which enables optimum mixture flow.
Note: Replace the rubber silentblocs on 503 BL engines with aluminum bladders to avoid exhaust flange fatigue fractures at increased power. Ideally, you should use reinforced clutch springs to ensure that all the vitamins and minerals end up on the plate. For an additional flavor note, you can install a 32 mm resonance pot.
Protect the Pomodoro cylinder from heat with the original Sachs cylinder shield or the Pergola cylinder head in the optionally available accessories. You will also find a suitable swiing® irrigation system and piping there.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY, in cooperation with GFO – GOOD FOOD ONLY.
The set includes the following fixed parts:
Hole pattern [mm]: 40 x 60 / 37 x 37 · Manufacturer: GPO · Material: Gray cast iron · Displacement: 57 ccm · Nominal diameter: 41 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 22 mm · Ø Inlet inside: 19 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 32 mm · Outlet type: clamped
Manufacturer: GPO · Nominal diameter: 40 mm · Ø outside piston (A): 40.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 28 mm · Curvature (D): 3.2 mm · Total piston height (E): 49.4 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Thick piston ring: 1.8 mm · Weight: 86 g
Manufacturer: GPO · Material: Sealing paper, Sealing carton, Aluminum · Number of components: 3 pcs · Thickness: 0.3 mm, 1 mm · Ø cylinder: 41 mm · Hole spacing inlet: 0 - 32 mm
Details
Nominal diameter | 41 mm |
Manufacturer | GPO |
Material | Gray cast iron |
Displacement | 55 ccm |
Crankshaft stroke | 43 mm |
Ø cylinder neck | 45 mm |
Ø Outlet outside | 26 mm |
Ø outlet inside | 22 mm |
Ø Inlet inside | 19 mm |
Thread inlet | M5x0.8 (standard thread) |
Hole spacing inlet | 32 mm |
Ø piston pin (B) | 12 mm |
Outlet type | clamped |
Area of application | Tuning |
Hole pattern [mm] | 40 x 60 / 37 x 37 |
Suitable for the following models
Sachs | 503 - AAL, ABL, 2AL / 2BL |
Accessories & related products
Exhaust set "Tuning" chrome | Sachs 503 2AL/2BL
Manufacturer: Made in Portugal · Material: Steel · Color: Chrome · Surface: chrome-plated · Total length: 700 mm · Ø outside: 70 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cigar · Mounting type: Screwed clamp · Flame tube attachment: Plug connection clamped
EUR 112,60
swiing resonance exhaust set Ø 28 / 70 mm | Sachs 503
Manufacturer: swiing · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø outside: 70 mm · Ø Internal connection: 28 mm · Total length: 730 mm · Exhaust type: Cigar · Mounting type: Screwed clamp · Flame tube attachment: Plug connection clamped
EUR 157,70
swiing® revival silent blocks Alu Racing | Sachs 503 / 504 / 505 / 535
Nominal diameter: 8.5 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Surface: anodized · Ø inside: 8.3 mm · Ø outside: 21.95 mm · Total length: 13 mm · Ø Bundle: 26 mm · Alternative version of the Pony Spare part no.: A4286 · Alternative version of Sachs spare part no.: 0251 121 000
EUR 26,90
GPO Ø 43 mm "Pomodoro" cylinder kit | Sachs 503
Nominal diameter: 43 mm · Manufacturer: GPO · Material: Gray cast iron · Area of application: Tuning · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 22 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Hole pattern [mm]: 40 x 60 / 37 x 37
EUR 281,70
Moped fans like you also bought:
swiing 15 mm carburetor tuning camouflaged | Sachs 503
Nominal diameter: 15 mm · Manufacturer: swiing · Material: Aluminum · Carburetor type: SRE · Ø Internal connection: 20 mm · Total length: 66 mm · Width: 50 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Mounting type: Plug connection clamped · Height: 95 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5 · Area of application: Tuning · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
EUR 90,10
swiing® revival air filter Racing | Sachs 503
Manufacturer: swiing® revival parts · Material: Plastic · Area of application: Tuning · Filter type: Racing screen · Ø Internal connection: 20 mm · Total length: 165 mm · Height: 52 mm · Width: 68 mm · Mounting type: Plug connection clamped · Camouflaged: No · Color: black
EUR 67,50
swiing® ingenious 15 mm intake manifold long version | Sachs 503 2AL, 2BL
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Thread type: M6x1 (standard thread) · Ø inside: 15 mm · Ø External connection: 20 mm · Number of fixing points: 2 pcs · Total length: 70 mm · Total height: 80 mm · Height flange center hole: 70 mm · Hole spacing inlet: 32 mm · Mounting type: Screws · Camouflaged: No · Pony spare part no.: A2176
EUR 67,50
swiing® revival silent blocks Alu Racing | Sachs 503 / 504 / 505 / 535
Nominal diameter: 8.5 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Surface: anodized · Ø inside: 8.3 mm · Ø outside: 21.95 mm · Total length: 13 mm · Ø Bundle: 26 mm · Alternative version of the Pony Spare part no.: A4286 · Alternative version of Sachs spare part no.: 0251 121 000
EUR 26,90
GPO piston 40.94 mm | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: GPO · Ø outside piston (A): 40.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 28 mm · Curvature (D): 3.2 mm · Total piston height (E): 49.4 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 40 mm · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Thick piston ring: 1.8 mm · Weight: 86 g
EUR 45,00