Breaker without cable for various mopeds / mopeds and small motorcycles with Bosch / Ducati ignitions.
This breaker can be installed on Puch Maxi S, Maxi N, Supermaxi LG1 / LG2, X30 Sport, X30 Velux, Sachs 50/2, 502, 503, Zündapp Belmondo mopeds, among others. It also fits various other models such as Tomos ST50 and Sport, Kreidler RS and GT as well as Hercules K50, SB1 and SB5 as well as Batavus T49 S, DKW RT 159 and Sachs Famo 50 engines.
This breaker has a reinforced spring and larger contact base. It was specially developed for engines with high engine speeds.
Ø axle: 4 mm
Ø mounting hole: 4.5 mm
Ø inside flywheel: 90 mm
Note: It is essential to apply a little breaker grease to the contact strip to minimize wear.
Original BOSCH spare part number: 1 217 013 020
Original BERU spare part number: 0 340 100 466
Quality product from the German manufacturer BOSCH in original equipment quality.
Details
Manufacturer | BOSCH |
Material | Steel |
Area of application | Tuning |
Ø axle | 4 mm |
Cable available | No |
Number of fixing points | 1 pcs |
Ø Internal flywheel | 90 mm |
Ø mounting hole | 4.5 mm |
Alternative version of the Pony Spare part no. | A4606 |
BOSCH spare part no. | 1 217 013 020 |
Alternative version of Sachs spare part no. | 0983 106 000 |
BERU spare part no. | 0 340 100 466 |
Suitable for the following models
Puch | E50 ZA50 (Fahrtwindgekühlt) ZA50 (Gebläsegekühlt) Z50 (X30 Sport) Z50 (X30 Velux) 2-Gang MS, MV, MV50 3-Gang VSD, DS, VZ, MC |
Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 50/5 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 505 (mit Tretwelle) - 1A (AT), 2 A (HG) 535 |
Zündapp Belmondo | |
Tomos | A3 |
DKW | |
Hercules | |
Kreidler | Flory MF Florett |
Zündapp | 434 Fahrgestell (Bergsteiger) 247 Motor 278 Motor |
KTM | |
Rixe |
Accessories & related products
BOSCH screw-in condenser | Bosch / Ducati
Manufacturer: BOSCH · Area of application: Original · Area of application: Standard · Capacity: 0.2 µF · Mounting type: Plug connection clamped · Connection type: Thread for screwing · Ø outside: 18 mm · Height: 27 mm · Thread type: M3x0.5 (standard thread) · Alternative version of the Pony Spare part no.: A2090 · Pony spare part no.: A2092 · BOSCH spare part no.: 2 207 330 050 · Alternative version of Sachs spare part no.: 0265 052 003 · Sachs spare part no.: 0265 052 007
EUR 22,40
swiing condenser for screwing | Bosch / Ducati
Manufacturer: swiing · Area of application: Original · Area of application: Standard · Capacity: 0.16 µF · Mounting type: Plug connection clamped · Connection type: Thread for screwing · Ø outside: 18 mm · Height: 23 mm · Thread type: M3x0.5 (standard thread) · BOSCH spare part no.: 2 207 330 050
EUR 11,20
DUCATI ignition coil (1A quality)
Place of use: Internal (in the ignition) · Manufacturer: DUCATI · Area of application: Original · Area of application: Standard · Ø cable holder: 5.9 mm · Total length: 76.5 mm · Ø mounting hole: 4.6 mm · Height: 17 mm · Cable length: 37 mm · Number of fixing points: 2 pcs · Ø Internal flywheel: 90 mm · Color: black · Hole spacing: 54 mm · Mounting type: Screws · Pony spare part no.: A2114 · Alternative version of the Pony Spare part no.: A2116 · Alternative version of the Pony Spare part no.: A2118 · Pony spare part no.: A5524 · Alternative version of Sachs spare part no.: 0265 142 002 · Alternative version of Sachs spare part no.: 0265 142 004 · Sachs spare part no.: 0265 132 100 · Sachs spare part no.: 0265 203 001
EUR 73,20
swiing ignition coil Bosch 2 204 210 013 | Puch / Sachs / Pony / Hercules
Manufacturer: swiing · Total length: 76.7 mm · Area of application: Original · Area of application: Standard · Place of use: Internal (in the ignition) · Ø cable holder: 5.8 mm · Cable length: 38 mm · Ø Internal flywheel: 90 mm · Color: black · Hole spacing: 54 mm · Mounting type: Screws · Ø mounting hole: 4.6 mm · Number of fixing points: 2 pcs · Height: 17 mm
EUR 45,00
EFFE breaker without cable | Bosch / Ducati
Manufacturer: EFFE · Ø axle: 4 mm · Area of application: Original · Area of application: Standard · Material: Steel · Cable available: No · Number of fixing points: 1 pcs · Ø mounting hole: 4.5 mm · BOSCH spare part no.: 1 217 013 021 · BOSCH spare part no.: 1 217 013 022 · BOSCH spare part no.: 1 217 013 015 · BERU spare part no.: 0 340 100 465
EUR 16,80
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Color: silver · Pony spare part no.: A2099 · Sachs spare part no.: 0265 100 00
EUR 9,85
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs
Width across flats (trigger): 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Number of components: 1 pcs · Total length: 55 mm · Total length: 75 mm · Width across flats Screw: 19 mm · Strength class: 8.8 · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread)
EUR 11,20
Motorex Automatic Motor Oil (ATF) 450 ml
Temperature resistance (min.): -45 - 200 °C · Manufacturer: Motorex · Area of application: Gearbox lubrication with clutch · Oil type: ATF Dextron 3 (DEXIII) · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Pony spare part no.: A2080 · Sachs spare part no.: 0263 014 002
EUR 11,20
EUR 24,89/l
BOSCH screw-in condenser | Bosch / Ducati
Manufacturer: BOSCH · Area of application: Original · Area of application: Standard · Capacity: 0.2 µF · Mounting type: Plug connection clamped · Connection type: Thread for screwing · Ø outside: 18 mm · Height: 27 mm · Thread type: M3x0.5 (standard thread) · Alternative version of the Pony Spare part no.: A2090 · Pony spare part no.: A2092 · BOSCH spare part no.: 2 207 330 050 · Alternative version of Sachs spare part no.: 0265 052 003 · Sachs spare part no.: 0265 052 007
EUR 22,40
BOSCH Breaker with cable | Bosch / Ducati
Manufacturer: BOSCH · Area of application: Original · Area of application: Standard · Material: Steel · Ø axle: 4 mm · Cable available: Yes · Ø mounting hole: 4.5 mm · Cable length: 100 mm · Number of fixing points: 1 pcs · Ø Internal flywheel: 90 mm · Alternative version of the Pony Spare part no.: A4606 · Alternative version of the Pony Spare part no.: A4606A · Pony spare part no.: A4607 · BOSCH spare part no.: 1 217 013 025 · Sachs spare part no.: 0283 116 102 · Alternative version of Sachs spare part no.: 0983 106 000 · Alternative version of Sachs spare part no.: 2783 039 001 · BERU spare part no.: 0 340 100 710
EUR 22,30
swiing condenser for screwing | Bosch / Ducati
Manufacturer: swiing · Area of application: Original · Area of application: Standard · Capacity: 0.16 µF · Mounting type: Plug connection clamped · Connection type: Thread for screwing · Ø outside: 18 mm · Height: 23 mm · Thread type: M3x0.5 (standard thread) · BOSCH spare part no.: 2 207 330 050
EUR 11,20
BOSCH capacitor for soldering (low) | Bosch / Ducati
Ø outside: 18 mm · Manufacturer: BOSCH · Area of application: Original · Area of application: Standard · Mounting type: Plug connection clamped · Height: 25.5 mm · Connection type: Soldering · Pony spare part no.: A2090 · BOSCH spare part no.: 1 237 330 035 · Zündapp spare part no.: 266 07 903 · Puch spare part no.: 302 1 50 013 2 · Puch spare part no.: 364 4 50 513 2 · Sachs spare part no.: 0265 052 033 · Sachs spare part no.: 0265 052 003
EUR 22,40
EUR 25,80