Long version of the bolt (brake anchor bolt) for holding the support plate (brake anchor plate) of various Puch mopeds, mopeds and small motorcycles.
Total length: 38.5 mm
Ø Bolt: 9.8 mm
The M10x1 nut and a matching washer for the pin are included in the scope of delivery.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Original Puch spare part number: 349.1.41.508.1
Details
| Manufacturer | GPO |
| Material | Chrome steel (stainless steel) |
| Thread type | MF10x1 (fine pitch thread) |
| Total length | 38.5 mm |
| Shank | Yes |
| Ø shaft | 9.8 mm |
| Number of components | 3 pcs |
Suitable for the following models
| Puch | ZA50 (Fahrtwindgekühlt) ZA50 (Gebläsegekühlt) Z50 (X30 Sport) |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Type of application: 1K · Area of application: Chemistry · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Contents [ml]: 10 ml · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 24,70
EUR 2.470,00/l
Loctite 638 High-strength adhesive 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Type of application: 1K · Area of application: Chemistry · Contents [ml]: 10 ml · Color: green · Hazard warning: Causes serious eye damage · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Danger · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Adhesion: high-strength · Temperature resistance (min.): -75 - 150 °C · Gap dimension (max.): 0.25 mm · Alignment time: 300 sec · Breakaway torque (according to material): 23 N/m · Breakaway torque (according to material): 25 N/m · Breakaway torque (according to material): 57 N/m
EUR 24,70
EUR 2.470,00/l
GPO Brake support bolt short Inox | Puch Maxi, Supermaxi
Manufacturer: GPO · Material: Chrome steel (stainless steel) · Area of application: Standard · Drive: Outer edge · Ø External head: 14 mm · Width across flats SW: 13 mm · Width across flats SW: 17 mm · Shank: Yes · Ø shaft: 9.8 mm · Shank length: 9.5 mm · Thread type: MF10x1 (fine pitch thread) · Total length: 32 mm · Thread length: 13 mm · Number of components: 3 pcs
EUR 14,50
swiing® revival rear brake anchor plate | Puch Maxi S, X30 NG
Ø bore: 12.2 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Ø External brake pads: 80 mm · Ø axle: 12 mm · Ø outside: 91 mm · Ø screw holder: 6.5 mm · Ø shaft: 10 mm · Wide cam holder: 12 mm · Brake lever length (lever length): 55 mm · Total length: 187 mm · Cranking (offset): 8 mm
EUR 78,80
swiing® revival rear brake anchor plate | Puch Maxi N
Ø bore: 12.2 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Ø External brake pads: 80 mm · Total length: 135 mm · Ø axle: 12 mm · Ø outside: 92 mm · Ø screw holder: 6.5 mm · Ø shaft: 10 mm · Wide cam holder: 12 mm · Brake lever length (lever length): 68 mm · Cranking (offset): 10 mm
EUR 84,40
Moped fans like you also bought:
Karcoma fuel tap M12x1 vertical (with union nut) 2 connections
Manufacturer: Karcoma · Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: vertical / vertical · Outlet direction: any · Mounting type: Union nut · Spare tube shape: straight · Ø fuel hose connection: 6 mm · Reserve level: 50 mm
EUR 25,80
swiing® revival bottom bracket bushing nylon | Puch Maxi, X30 Sport, Velux, NG-2AH
Bearing type: Plain bearing · Manufacturer: swiing® revival parts · Material: Nylon · Color: black · Surface: blank · Total length: 19 mm · Ø Bundle: 24.1 mm · Ø outside: 20.2 mm · Ø inside: 16.2 mm · Puch spare part no.: 349.1.42.005.1
EUR 2,80
swiing® revival stand spring Inox | Puch
Spring design: Tension spring · Ø wire: 2.5 mm · Length spring hook: 19 mm · Length spring hook: 53 mm · Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: raw · Total length: 122 mm · Ø outside: 14 mm · Ø inside: 9 mm
EUR 6,65
swiing® revival wiring harness MERIT light switch (version 2.0)
Manufacturer: swiing® revival parts · Cable cross-section [mm²]: 1.5 mm² · Area of application: Standard · Ø Receptacle: 22 mm · Number of cables: 5 pcs · Cable bifurcation to motor: 950 mm · Switch included: Yes · Luster terminal: Yes · Cable bifurcation to lamp: 230 mm · Cable bifurcation to switch: 400 mm · Tail light cable length: 1000 mm
EUR 45,00
Collection only possible with online purchase and appointment.
