43.0 mm ¨oum dimension piston with two 1.5 mm rectangular piston rings with internal fuse (IS) for blown BAD ASS Pandora 43.00 mm cylinders on your moped / moped with Sachs 503, 50/2, 502 engine.
The detailed dimensioning of the piston according to the technical drawing can be found in the details. You can also find out more about the piston rings, their piston rods and locking types on the legend in the pictures.
The piston kit is used for the bored and honed 43 mm cylinder variant.
The piston kit contains piston pins, piston clips and piston rings.
You will find the corresponding assembly tool, piston pin locks and, if necessary, the corresponding cylinder in the accessories section.
Quality product from the Italian manufacturer GOL.
Details
| Manufacturer | BAD ASS |
| Ø outside piston (A) | 42.96 mm |
| Compression height (C) | 27.8 mm |
| Curvature (D) | 2 mm |
| Total piston height (E) | 50.6 mm |
| Number of piston rings (F) | 2 pcs |
| Nominal diameter | 43 mm |
| Piston ring mold | Rectangular ring |
| Piston ring impact | Internal fuse (IS) |
| Ø piston pin (B) | 12 mm |
Suitable for the following models
| Sachs |
Accessories & related products
GPO piston 43 mm | Sachs 50/2, 50/3, 50/4
Nominal diameter: 43 mm · Manufacturer: GPO · Ø outside piston (A): 42.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 27.7 mm · Curvature (D): 2.4 mm · Total piston height (E): 50.2 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Thick piston ring: 1.8 mm
EUR 50,60
GPO Ø 41 mm "Pomodoro" cylinder kit | Sachs 503
Nominal diameter: 41 mm · Manufacturer: GPO · Material: Gray cast iron · Area of application: Tuning · Crankshaft stroke: 43 mm · Displacement: 55 ccm · Ø piston pin (B): 12 mm · Hole spacing inlet: 32 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø Inlet inside: 19 mm · Ø outlet inside: 22 mm · Thread inlet: M5x0.8 (standard thread) · Outlet type: clamped · Hole pattern [mm]: 40 x 60 / 37 x 37
EUR 225,30
GPO Ø 43 mm "Pomodoro" cylinder kit | Sachs 503
Nominal diameter: 43 mm · Manufacturer: GPO · Material: Gray cast iron · Area of application: Tuning · Crankshaft stroke: 43 mm · Displacement: 63 ccm · Ø piston pin (B): 12 mm · Hole spacing inlet: 32 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø Inlet inside: 19 mm · Ø outlet inside: 22 mm · Thread inlet: M6x1 (standard thread) · Outlet type: clamped · Hole pattern [mm]: 40 x 60 / 37 x 37
EUR 281,70
EUR 338,00
BAD ASS Ø 41 mm "Pandora" tuning cylinder | Sachs 503, 50/2, 502
Nominal diameter: 41 mm · Manufacturer: BAD ASS · Material: Gray cast iron · Surface: sandblasted · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 23 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Hole pattern [mm]: 40 x 60 / 37 x 37 · Camouflaged: No · Area of application: Tuning
EUR 214,00
EUR 258,00
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm
EUR 3,15
swiing® revival clutch plates (2 pcs.) | Sachs 50/2, 503 2AL/2BL (A3887)
Manufacturer: swiing® revival parts · Ø inside: 29.7 mm · Ø inside: 36 mm · Ø outside: 93.7 mm · Material: Composite materials · Area of application: Standard · Material: Steel · Recording type: Interlocking · Number of slats: 2 pcs · Thickness: 3.3 mm · Pony spare part no.: A3887 · Sachs spare part no.: 0659 010 006
EUR 29,60
BAD ASS Diablo cylinder Ø 41 mm | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: BAD ASS · Material: Gray cast iron · Camouflaged: No · Surface: raw · Crankshaft stroke: 42 mm · Displacement: 55 ccm · Ø piston pin (B): 12 mm · Hole spacing inlet: 31 mm · Ø cylinder neck: 46 mm · Ø outlet inside: 28 mm · Ø Outlet outside: 40 mm · Nominal diameter: 41 mm · Area of application: Tuning · Inlet window: 17 x 15 mm · Thread inlet: M5x0.8 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 60 x 40 / 51 x 40 / 37 x 37 · Outlet type: Union nut · Thread outlet: MF40x1.5 (fine pitch thread)
EUR 270,40
Collection only possible with online purchase and appointment.
