Used cylinder cover with 38 mm combustion chamber diameter suitable for Puch Maxi S / N, Puch X30 Sport NS / NL, Puch X30 Sport N-2AH, as well as converted Puch Supermaxi LG1 / LG2 mopeds / mopeds.
With small cooling fins, which are cooled by ambient air (airstream). The head has the original CH 9 (0.9 hp) stamping.
This cylinder head has a holder for mounting a decompressor.
Dimension (L x W x H): 13.5 x 12.5 x 5.5 cm
Used spare part which is in technically serviceable condition, signs of use are to be expected.
The cylinder head is sandblasted, the sealing surface should be briefly ground flat for safety reasons.
Original Puch spare part number: 349.8.10.101.1
Details
| Manufacturer | Puch |
| Total length | 135 mm |
| Width | 125 mm |
| Area of application | Original |
| Material | Aluminum |
| Surface | sandblasted |
| Ø cylinder | 38 mm |
| Power [PS] | 0.9 Ps |
| Height | 55 mm |
| Number of fixing points | 4 pcs |
| Decompressor | MF10x1 |
| Puch spare part no. | 349.8.10.101.1 |
Suitable for the following models
| Puch | E50 ZA50 (Fahrtwindgekühlt) Z50 (X30 Sport) |
Accessories & related products
GPO gasket set cylinder original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Ø cylinder: 38 mm · Number of components: 4 pcs · Ø outlet inside: 22 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Area of application: Standard
EUR 8,35
Autosol Brake Cleaner 500 ml
Manufacturer: Autosol · Contents [ml]: 500 ml · Hazard warning: Causes skin irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Area of application: Cleaner
EUR 15,70
EUR 31,40/l
GPO cylinder stud bolt set special M6x106 mm galvanized | Puch
Manufacturer: GPO · Material: Steel · Surface: blue galvanized · Thread type: M6x1 (standard thread) · Drive: External hexagon · Diameter: 7 mm · Total length: 106 mm · Strength class: 10 · Strength class: 10.9 · Thread length: 15 mm · Thread length: 19 mm · Width across flats SW: 10 mm · Alternative version of the Puch spare part no.: 360.1.10.034.1
EUR 22,30
38 mm cylinder head 0.9 PS original NOS | Puch
Manufacturer: Puch · Material: Aluminum · Surface: blank · Area of application: Original · Ø cylinder: 38 mm · Total length: 135 mm · Number of fixing points: 4 pcs · Candle thread: short · Height: 55 mm · Width: 125 mm · Hole pattern [mm]: 44 x 44 · Decompressor: MF10x1 · Puch spare part no.: 349.8.10.101.1
EUR 67,50
Moped fans like you also bought:
swiing® revival screw set clutch cover galvanized | Puch E50
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Thread type: M6x1 (standard thread) · Number of components: 4 pcs · Color: silver · Drive: Cross recess · Screw head: Countersunk head · Screw head: Lens head · Thread length: 25 mm · Puch spare part no.: 900.9460
EUR 5,50
Collection only possible with online purchase and appointment.
