Disc brake
Sort:Popularity
Brake caliper, brake hose & brake lever for EBR forks
Material: Cast aluminum · Color: gray · Surface: varnished · Thread type: M8x1.25 (standard thread) · Ø Handlebars: 22 mm · Mounting type: Nuts & bolts · Number of fixing points: 4 pcs · Brake lever length (lever length): 162 mm · Cable length: 900 mm · Hole spacing: 32 mm · Hole spacing: 60 mm
EUR 184,70
Brake line 0.9 - 1.9 m (selection) black 28 / 90° incl. banjo bolts
Material: Rubber · Material: Steel · Color: black · Cable length: 900 mm · Cable length: 1000 mm · Cable length: 1150 mm · Cable length: 1400 mm · Cable length: 1600 mm · Cable length: 1700 mm · Cable length: 1900 mm · Mounting type: Screws · Thread type: MF10x1.25 (fine pitch thread)
EUR 26,90
Motorex brake fluid DOT4 250 ml
Manufacturer: Motorex · Area of application: Standard · DOT class (brake fluid): DOT 4 (230°C) · Contents [ml]: 250 ml · Hazard warning: Can harm the child in the womb · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS08 - Harmful to health
EUR 9,80
EUR 39,20/l
swiing® ingenious nut M8 "Special" hexagon socket
Manufacturer: swiing® ingenious parts · Area of application: Road use · Material: Steel · Surface: galvanized (blue) · Thread type: M8x1.25 (standard thread) · Nut type: Special special nut · Drive: Hexagon socket · Width across flats SW: 8 mm · Ø outside: 13 mm · Height: 15 mm · Thread depth: 9 mm
EUR 5,50
Hot 
swiing wheel hub spoke rim with disc brake chrome
Manufacturer: swiing · Material: Aluminum · Area of application: Cross · Area of application: MX · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Color: Chrome · Surface: chrome-plated · Thread type: M8x1.25 (standard thread) · Ø axle: 12 mm · Ø Receptacle: 12 mm · Width: 77 mm · Ø outside: 120 mm · Number of fixing points: 5 pcs · Ø bolt circle: 104.5 mm · Number of spoke holes: 36 pcs · Ø spoke hole: 3.7 mm
EUR 169,00
Malossi brake fluid DOT4 250 ml
Manufacturer: Malossi · Area of application: Standard · DOT class (brake fluid): DOT 4 (230°C) · Contents [ml]: 250 ml · Hazard warning: Can harm the child in the womb · Signal word: Danger · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS08 - Harmful to health
EUR 12,30
EUR 49,20/l
More braking power for your Sachs moped with a disc brake
Most Sachs mopeds are fitted with drum brakes from the factory. They offer proven technology and, above all, are very well protected against dirt. However, the problem with drum brakes is that the braking power decreases noticeably after several heavy braking operations in succession. If you have increased the performance of your pearl enormously and are travelling at high speeds, it is therefore important to consider an alternative braking system. The disc brake is an ideal solution here, as you can easily retrofit this brake system to your Sachs moped with the kits from our range. The disc brake offers the significant advantage of increased braking power and constant performance even at high speeds and frequent heavy braking. From the brake caliper and brake disc to the brake lever and brake line to the brake fluid reservoir, we have everything you need for the new brakes on your moped.
Retrofitting disc brakes to your Sachs moped: it's worth the effort
If you want to replace the original brake on your moped with a disc brake, this is not a project that can be completed in a matter of minutes. As a rule, it is not enough to simply fit the brake disc, the brake lever and the hose. The brake calliper and the reservoir must also be retrofitted when installing a hydraulic disc brake on your Sachs moped. To do this, however, your bike must be equipped with a suitable fork for Sachs mopeds and a suitable rim or wheel hub. Only then can the saddle and brake disc be fitted without any problems and then function as intended. You can find out how to retrofit a disc brake to your moped in various video tutorials on our YouTube channel.
Your new disc brakes in top quality
As always, when you order parts for your moped from us, you can also rely on maximum quality for your disc brake parts. You can either order all parts, such as the brake lever, hose, brake caliper and disc for your brake individually, or you can opt for a complete set to match your Sachs moped. The latter has the advantage that you have all the parts you need to retrofit a disc brake to your moped. You can also order custom-fit forks and rims for your Sachs moped that are suitable for retrofitting disc brakes. Consumables and wearing parts for the disc brakes on your Sachs moped are also available from us, such as brake fluid and brake pads for the brake calliper.
Order your new disc brakes for your Sachs moped now at a fair price from mofakult
Would you like to brake with more grip on your Sachs moped in future? Then simply order the right disc brake system for retrofitting in our shop. First-class quality at fair prices and a wide selection of high-quality branded parts with immediate availability from stock await you here. All other parts relating to wheels and tyres for your Sachs moped are also available from us. Simply contact us if you have any questions about a set or replacement part. We will be happy to assist you with your selection over the phone or answer your enquiry by email.
Collection only possible with online purchase and appointment.
