Bladed 41 mm (55 ccm) cylinder kit with 12 mm piston pin, suitable for your Puch X30 Velux and X30 NG-2AH moped / moped and with adaptations to your DS, MV, MS, VZ (EX50) small motorcycle
The timing was kept rather low on the cylinder, which is characterized by a very nice torque in the lower speed range.
Details:
Cast iron reproduction cylinder with Ø 41.0 mm bore
Slot-controlled
Ø 19 mm intake, 32 mm stud spacing
Optimized overflow channels
Improved timing
No need for spindling of the engine housing (Ø cylinder neck 45.0 mm)
Ø 25 mm outlet, 42 mm stud bolt spacing
Hole pattern stud bolt: 44 x 44 mm
Incl. Ø 41 mm piston from the Italian manufacturer -GOL-
Notes:
For Puch Velux engines, the slot on the housing no longer needs to be cast on thanks to the large sealing surface.
For ZA50-G engines, the housing may need to be spindled on.
The cylinder kit can also be used on DS, MV, MS, VZ (EX50) engines, provided the housing is spindled on.
Corresponding accessories such as gaskets, cylinder head, exhaust system etc. can be found in the accessories section.
Made by the BADASS brand.
Details
Manufacturer | BAD ASS |
Nominal diameter | 41 mm |
Area of application | Tuning |
Material | Gray cast iron |
Surface | sandblasted |
Ø cylinder neck | 44.9 mm |
Ø outlet inside | 25 mm |
Ø Inlet inside | 19 mm |
Thread inlet | M6x1 (standard thread) |
Hole spacing inlet | 32 mm |
Ø piston pin (B) | 12 mm |
Outlet type | straight |
Hole spacing outlet | 42 mm |
Number of fixing points | 4 pcs |
Thread outlet | M6x1 (standard thread) |
Hole pattern [mm] | 44 x 44 |
Decompressor | No |
Camouflaged | No |
Suitable for the following models
Puch | ZA50 (Gebläsegekühlt) Z50 (X30 Velux) 2-Gang MS, MV, MV50 3-Gang VSD, DS, VZ, MC |
Accessories & related products
swiing® ingenious 15 mm intake manifold (CNC) | Puch X30 Velux
Ø inside: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Mounting type: Screws · Hole spacing inlet: 32 mm · Number of fixing points: 2 pcs · Ø External connection: 20 mm
EUR 49,50
EUR 56,20
swiing® ingenious 15 mm carburetor set camouflaged | Puch X30 Velux
Manufacturer: swiing® ingenious parts · Area of application: Tuning · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Air filter connection: 23 mm · Mounting type: Flange · Mounting type: Plug connection clamped · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle size: 62 · Hole spacing inlet: 32 mm
EUR 138,40
swiing set exhaust resonance Ø 28 / 70 mm | Puch X30 Velux
Manufacturer: swiing · Material: Steel · Surface: chrome-plated · Ø outside: 70 mm · Total length: 730 mm · Color: Chrome · Ø Internal connection: 28 mm · Exhaust type: Cigar · Mounting type: Screwed clamp · Flame tube attachment: Flange
EUR 169,00
swiing® revival Set stud bolts M6x30 (strength 10.9) galvanized
Diameter: 6 mm · Total length: 30 mm · Width across flats SW: 10 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Thread type: M6x1 (standard thread) · Drive: External hexagon · Thread length: 12 mm · Strength class: 8 · Strength class: 10.9
EUR 12,00
GOL piston 41 mm BAD ASS Lucifer | Puch X30 Velux, NG-2AH
Nominal diameter: 41 mm · Manufacturer: BAD ASS · Ø outside piston (A): 40.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.4 mm · Curvature (D): 2.4 mm · Total piston height (E): 48.3 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS)
EUR 78,80
GPO cylinder gasket set BAD ASS Lucifer / GPO Sombrero 41 mm | Puch X30 Velux, NG-2AH
Manufacturer: GPO · Material: Aluminum · Material: Sealing paper · Area of application: Tuning · Ø cylinder: 41 mm · Hole spacing inlet: 32 mm · Thickness: 0.4 mm · Thickness: 0.45 mm · Ø outlet inside: 27 mm · Hole spacing outlet: 32 mm · Decompressor: Yes · Number of components: 4 pcs · Hole pattern [mm]: 44 x 44 mm
EUR 22,40
GPO Ø 41 mm "Sombrero" cylinder kit | Puch X30 Velux, NG-2AH
Nominal diameter: 41 mm · Manufacturer: GPO · Material: Gray cast iron · Displacement: 57 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 44.7 mm · Ø outlet inside: 25 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 10 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: No · Area of application: Tuning
EUR 225,30
Moped fans like you also bought:
GPO license plate holder Inox
Thread type: M5x0.8 (standard thread) · Manufacturer: GPO · Total length: 145 mm · Material: Chrome steel (stainless steel) · Width: 105 mm · Thread length: 8 mm · Color: silver · Hole spacing: 30 mm · Hole spacing: 50 mm · Mounting type: Nuts & bolts · Ø mounting hole: 5 mm · Number of fixing points: 2 pcs · Height: 5.3 mm
EUR 12,30
swiing 15 mm carburetor tuning camouflaged | Sachs 503
Manufacturer: swiing · Total length: 66 mm · Area of application: Tuning · Camouflaged: Yes · Material: Aluminum · Width: 50 mm · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Mounting type: Plug connection clamped · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle block: 2.17 · Nozzle size: 62 · Height: 95 mm · Clamping screw torque (max.): 4 N/m
EUR 90,10
swiing® ingenious 15 mm carburetor set camouflaged | Puch X30 Velux
Manufacturer: swiing® ingenious parts · Area of application: Tuning · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Air filter connection: 23 mm · Mounting type: Flange · Mounting type: Plug connection clamped · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle size: 62 · Hole spacing inlet: 32 mm
EUR 138,40
GPO cylinder gasket set BAD ASS Lucifer / GPO Sombrero 41 mm | Puch X30 Velux, NG-2AH
Manufacturer: GPO · Material: Aluminum · Material: Sealing paper · Area of application: Tuning · Ø cylinder: 41 mm · Hole spacing inlet: 32 mm · Thickness: 0.4 mm · Thickness: 0.45 mm · Ø outlet inside: 27 mm · Hole spacing outlet: 32 mm · Decompressor: Yes · Number of components: 4 pcs · Hole pattern [mm]: 44 x 44 mm
EUR 22,40