ADDY clutch disk (inner plate) suitable for your manual moped / moped with Sachs 503 2AL / 2BL engine.
The clutch plate is suitable for the ADDY 4-plate racing clutch. The cork and rubber-based clutch lining is the second of three stages and corresponds to the sporty lining. Little wear on the steel plates, but medium transmission performance.
The clutch facings are manufactured in an environmentally friendly manner and are made from environmentally friendly materials.
Facing thickness: 3.5 mm
Price per piece - you need 4 pieces for the clutch.
Alternative clutch linings and other attachments can be found under accessories.
Quality product of the brand ADDY by Schöb Engineering.
Details
| Manufacturer | ADDY |
| Thickness | 3.5 mm |
| Area of application | Tuning |
| Material | Cork, Rubber |
| Ø inside | 63.5 mm, 68.5 mm |
| Recording type | Interlocking |
| Number of slats | 4 pcs |
| Ø outside | 94 mm |
Suitable for the following models
| Sachs | 503 - 2AL / 2BL |
Accessories & related products
Hot 
3-plate clutch | Sachs 503, 50/2 (502), 50/3, 50/4
Manufacturer: Made in Europe · Material: Composite materials · Material: Steel · Area of application: Tuning · Recording type: Interlocking · Ø inside: 29.6 mm · Ø inside: 35.3 mm · Ø outside: 110.5 mm · Number of slats: 3 pcs · Thickness: 3.8 mm · Number of springs: 9 pcs
EUR 471,00
ADDY clutch plate (4-plate clutch) green sintered technology (stage 3) | Sachs 503
Manufacturer: ADDY · Material: Composite materials · Area of application: Tuning · Recording type: Interlocking · Ø inside: 63.5 mm · Ø inside: 68.5 mm · Ø outside: 94 mm · Number of slats: 4 pcs · Thickness: 3.5 mm
EUR 12,90
Moped fans like you also bought:
NSK BO15 shoulder ball bearing 15/40/10 (A4502)
Bearing cage: Brass cage ball-guided · Stock number: BO15 · Width: 10 mm · Inner ring width: 10 mm · Manufacturer: NSK · Material: Brass · Area of application: Standard · Material: Steel · Bearing type: Shoulder bearing · Surface: blank · Ø outside: 40 mm · Ø inside: 15 mm · Ball bearing closed: No · Pony spare part no.: A4502 · Sachs spare part no.: 0932 007 001
EUR 28,10
swiing® revival locking plate drive wheel Inox | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A1717)
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Thickness: 0.5 mm · Number of lobes: 1 pcs · Pony spare part no.: A1717 · Sachs spare part no.: A1717 · Sachs spare part no.: 0246 049 000
EUR 7,80
Gasket set large | Sachs 503 engine
Material: Aluminum · Material: Copper · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 13.3 mm · Hole pattern [mm]: 60 x 40 · Hole spacing inlet: 32 mm · Number of components: 14 pcs · Area of application: Standard
EUR 45,00
swiing® revival shim set | Sachs 503, 502, 50/2, 50/3
Nominal diameter: 13 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: blank / oiled · Thickness: 0.1 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.4 mm · Thickness: 0.45 mm · Thickness: 0.5 mm · Thickness: 1 mm · Ø inside: 12.5 mm · Ø inside: 15.2 mm · Ø outside: 18 mm · Ø outside: 21 mm
EUR 19,00
swiing® revival silent blocks Alu Racing | Sachs 503 / 504 / 505 / 535
Nominal diameter: 8.5 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Surface: anodized · Ø inside: 8.3 mm · Ø outside: 21.95 mm · Total length: 13 mm · Ø Bundle: 26 mm · Alternative version of the Pony Spare part no.: A4286 · Alternative version of Sachs spare part no.: 0251 121 000
EUR 26,90
Collection only possible with online purchase and appointment.
