38 mm reproduction cylinder kit for Puch Supermaxi LG1 / LG2 mopeds. This cylinder also fits Puch Maxi or Puch X30 mopeds, as it is equipped with smaller exhaust ports. In this case, however, the corresponding exhaust with a narrower outlet must be fitted.
The tuning cylinder has a larger inlet and outlet. Therefore, the cylinder has slightly more intake than the original counterpart.
The piston has two piston rings.
You can find suitable add-on parts in the accessories section.
Attention: The stud bolt distance on the intake side is only 32 mm. On the original cylinder, this is 38 mm. The holes on the intake manifold must therefore be widened slightly in order to be able to fit it.
Details
Camouflaged | No |
Area of application | Tuning |
Material | Gray cast iron |
Surface | sandblasted |
Displacement | 50 ccm |
Crankshaft stroke | 43 mm |
Nominal diameter | 38 mm |
Thread inlet | M6x1 (standard thread) |
Ø piston pin (B) | 12 mm |
Outlet type | slanted |
Hole spacing outlet | 42 mm |
Thread outlet | M6x1 (standard thread) |
Number of fixing points | 4 pcs |
Hole pattern [mm] | 44 x 44 |
Hole spacing inlet | 32 mm |
Suitable for the following models
Puch | E50 ZA50 (Fahrtwindgekühlt) Z50 (X30 Sport) |
Accessories & related products
GPO gasket set cylinder original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Ø cylinder: 38 mm · Hole spacing inlet: 32 - 38 mm · Ø outlet inside: 22 mm · Hole spacing outlet: 42 mm · Decompressor: Yes · Number of components: 4 pcs · Hole pattern [mm]: 44 x 44 mm
EUR 8,35
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Bearing type: Needle roller and cage assembly · Ø inside: 12 mm · Ø outside: 15 mm · Manufacturer: swiing® ingenious parts · Bearing cage: Silver cage · Width: 14.2 mm · Dimension needle bearing: 12/15 x 14.2 · Alternative version of the Pony Spare part no.: A4222 · Tomos spare part no.: 035548 · Alternative version of Sachs spare part no.: 0232 157 001
EUR 13,40
Moped fans like you also bought:
Motorex Automatic Motor Oil (ATF) 450 ml
Manufacturer: Motorex · Area of application: Gearbox lubrication with clutch · Oil type: ATF Dextron 3 (DEXIII) · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Temperature resistance (min.): -45 - 200 °C · Pony spare part no.: A2080 · Sachs spare part no.: 0263 014 002
EUR 11,20
EUR 24,89/l
NSK E20 shoulder ball bearing
Bearing type: Deep groove ball bearing · Ø inside: 20 mm · Stock number: E20 · Ø outside: 47 mm · Inner ring width: 12 mm · Manufacturer: NSK · Ball bearing closed: No · Bearing clearance: CN (standard) · Bearing cage: Brass cage ball-guided · Material: Brass · Surface: blank · Width: 12 mm
EUR 28,10
NSK L17 shoulder ball bearing
Width: 10 mm · Bearing type: Shoulder bearing · Stock number: L17 · Inner ring width: 10 mm · Manufacturer: NSK · Ball bearing closed: No · Ø inside: 17 mm · Ø outside: 40 mm · Bearing clearance: CN (standard) · Bearing cage: Brass cage ball-guided · Material: Brass · Area of application: Standard · Material: Steel · Surface: blank / oiled
EUR 22,00
Oil seal NBR 17/35/7 AS crankshaft | Puch X30
Simmering type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Ø inside: 17 mm · Ø outside: 35 mm · Manufacturer: Puch · Material: NBR · Surface: rubberized · Width: 7 mm · Place of use: Crankshaft · Temperature resistance (min.): -30 - 100 °C
EUR 8,90