Hot 
Adjustable premium gas pressure shock absorbers in black with adjustable coil spring for your moped, moped and small motorcycle.
The high-end dampers are mainly used in the cross sector and impress with their optimum adjustability. The response behavior can be easily adjusted with just a few clicks. The height or preload of the springs can be infinitely adjusted by up to 60 mm using a thread. The rear springs should always be secured with large washers to prevent the bearing bushes from shifting when lateral forces occur.
Length (mount – mount): 330 mm
Ø outer spiral spring: 61 mm
Ø expansion joint: 52 mm
Ø bushings for fastening: 10 mm
Color: black / red
The scope of delivery corresponds to one pair.
Simpler rear springs as well as the washers and fastening material can be found under accessories.
Quality product from the manufacturer YSS.
Details
| Manufacturer | YSS |
| Material | Aluminum, Steel, Chrome steel (known as Nirosta®) |
| Surface | anodized |
| Damping type | Pneumatic (air) |
| Mounting type | Nuts & bolts |
| Adjustable | Yes |
| Color | black, red |
| Ø outside | 61 mm |
| Ø Fastening inside | 10 mm |
| Number of fixing points | 2 pcs |
| Total length | 330 mm, 340 mm |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Color: blue · Contents [ml]: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Temperature resistance (min.): -75 - 200 °C · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 25,30
EUR 2.530,00/l
Inox
Hot
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Material: Steel · Thread type: M8x1.25 (standard thread) · Drive: External hexagon · Screw head: Hexagon · Number of components: 17 pcs
EUR 20,70
MKX shock absorber 34 cm black
Manufacturer: MKX · Surface: varnished · Color: black · Damping type: Spring · Adjustable: Yes · Ø outside: 46 mm · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Ø spars: 24 mm · Total length: 340 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
EUR 57,60
Moped fans like you also bought:
GPO 17" spoke set incl. nipple (2.9 x 188 mm) Inox
Nipple length: 14 mm · Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Color: silver · Quantity: 36 pcs · Surface: raw · Length from hook: 188 mm · Ø spoke head: 5.35 mm · Ø spoke: 2.9 mm · Nominal diameter (thread): 3.15 mm · Ø nipple head: 7.9 mm · Ø Nipple neck: 5 mm · Hook length: 9 mm · Thread length: 11 mm · Hook angle: 95 °
EUR 63,40
SITO exhaust Ø 20 mm | Piaggio Ciao, Bravo
Manufacturer: SITO · Material: Steel · Color: black · Surface: varnished · Total length: 605 mm · Ø Silencer: 65 mm · Ø Internal connection: 22.5 mm · Ø Flame tube outside: 20 mm · Exhaust type: Cylindrical · Mounting type: Welded lug · Flame tube attachment: Plug connection clamped · Number of fixing points: 1 pcs
EUR 74,90
Collection only possible with online purchase and appointment.
