Black, adjustable dampers for your moped, moped and small motorcycle.
The hardness or the preload of the dampers can be adjusted by the special spring mount.
Length (mount - mount): 260 mm
Outer diameter of coil spring: 44 mm
Holt diameter: 28 mm
Wall diameter for mounting: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery corresponds to one pair.
Rear springs from other manufacturers, the matching adjustment key as well as the washers and fastening material can be found in the accessories section.
Branded product from the manufacturer Xtreme.
Details
Manufacturer | Xtreme |
Surface | varnished |
Color | black |
Damping type | Spring |
Adjustable | Yes |
Total length | 260 mm |
Ø Fastening inside | 10 mm |
Ø outside | 44 mm |
Ø spars | 28 mm |
Mounting type | Nuts & bolts |
Number of fixing points | 2 pcs |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Type of application: 1K · Area of application: Chemistry · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Contents [ml]: 10 ml · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 24,70
EUR 2.470,00/l
MKX shock absorber 26 cm chrome
Manufacturer: MKX · Surface: chrome-plated · Color: Chrome · Damping type: Spring · Adjustable: Yes · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Ø outside: 46 mm · Number of fixing points: 2 pcs · Mounting type: Nuts & bolts · Ø spars: 24 mm · Total length: 260 mm
EUR 56,20
Moped fans like you also bought:
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Area of application: Standard · Surface: blue galvanized · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Total length: 15 mm · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Ø Bundle: 6 mm · Screw head: Hexagon · Width across flats SW: 7 mm · Ø outside: 8 mm · Thread length: 7 mm
EUR 2,80
Spotlight round Ø 13 cm chrome / black
Material: Sheet metal (steel) · Test mark: none · Bulb holder: BA15d · Housing material: Metal · Color: Chrome · Area of application: Standard · Color: black · Surface: chrome-plated · Color: transparent · Surface: varnished · Lens material: Plastic · Width: 134 mm · Height: 147 mm · Ø outside: 130 mm · Mounting type: Screws · Depth: 80 mm · Thread size: M6 · Switch included: No · Battery operated: No · Number of fixing points: 2 pcs · Speedometer recording: None
EUR 28,10
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 11,20
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: blue galvanized · Surface: raw · Color: silver · Thread type: M5x0.8 (standard thread) · Drive: Slot · Drive: Triangular head · Thread length: 35 mm · Thread length: 50 mm · Total length: 47 mm · Total length: 60 mm
EUR 14,50