Stylish racing exhaust with attached muffler suitable for various Puch mopeds / mopeds.
The raw steel exhaust is sealed with heat-resistant clear lacquer. This gives your racing moped an even more radical look. In addition, the tuning muffler also delivers the performance that it promises with its appearance.
The rearmost end of the resonance body is fitted with a screw. Two additional screws with different holes are included in the scope of delivery. Replacing the screws changes the exhaust back pressure and thus the performance of the silencer. This gives you an exhaust for the lower, middle and upper speed range in one!
Ø Flame tube: 28 mm
Ø Flame tube inside: 25 mm
Hole spacing: 43 mm
Fixing hole: 6.2 mm
Total length: 900 mm
Alternative racing tailpipes and the required mounting material can be found under accessories.
Branded product from the Portuguese manufacturer TECNO.
Details
| Manufacturer | TECNO |
| Mounting type | Welded lug |
| Material | Steel |
| Surface | varnished |
| Color | gray |
| Ø outside | 90 mm |
| Total length | 900 mm |
| Ø Silencer | 60 mm |
| Ø Internal connection | 25 mm |
| Ø Flame tube outside | 28 mm |
| Exhaust type | Cone / double cone |
| Number of fixing points | 2 pcs |
| Flame tube attachment | Stud bolts & nuts |
Suitable for the following models
| Puch | E50 Z50 (X30 Sport) |
Accessories & related products
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Place of use: Exhaust · Ø inside: 27.4 mm · Reinforced: No · Thickness: 3 mm · Ø screw holder: 6.6 mm · Ø outlet inside: 28 mm · Area of application: Tuning · Hole spacing outlet: 42.5 mm
EUR 8,65
Hot 
HOMOET exhaust P6 blank | Puch
Manufacturer: HOMOET · Mounting type: Tab · Material: Steel · Color: gray · Surface: raw · Surface: varnished · Ø outside: 88 mm · Total length: 900 mm · Ø Silencer: 50 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Flame tube attachment: Stud bolts & nuts · Number of fixing points: 2 pcs
EUR 332,00
Moped fans like you also bought:
GPO mushroom air filter grille, Bing SRE (Ø=20 mm)
Manufacturer: GPO · Mounting type: Bride · Mounting type: Plug connection clamped · Material: Metal · Material: Rubber · Color: Chrome · Color: black · Ø outside: 61 mm · Filter type: Grille · Total length: 113 mm · Camouflaged: No · Ø Internal connection: 20 mm · Length rubber part: 63.5 mm · Length of filter section: 49 mm · Area of application: Tuning
EUR 15,20
BING O-ring Bing SRE & 85, Ø 20 mm
Manufacturer: BING · Material: Rubber · Color: black · Surface: raw · Place of use: Carburetor · Ø inside: 17.2 mm · Ø outside: 20 mm · Cord thickness: 1.4 mm · Area of application: Standard · Number of components: 1 pcs · Pony OEM number: A4281 · Sachs OEM no.: 0250 160 101
EUR 3,35
swiing nozzle set M4 (50 - 60) Bing 18, Bing 85
Manufacturer: swiing · Material: Brass · Component group Carburetor: Spraying · Quantity: 11 pcs · Carburetor type: 17 Catalyst · Carburetor type: 18 Catalyst · Carburetor type: 85 · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M4x0.7 (standard thread) · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60
EUR 25,50
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Place of use: Exhaust · Ø inside: 27.4 mm · Reinforced: No · Thickness: 3 mm · Ø screw holder: 6.6 mm · Ø outlet inside: 28 mm · Area of application: Tuning · Hole spacing outlet: 42.5 mm
EUR 8,65
AKOA intake manifold 15 mm SRE | Sachs 503 AB, ADV (A5669, A2180)
Manufacturer: AKOA · Mounting type: Screws · Material: Aluminum · Ø inside: 15 mm · Ø External connection: 20 mm · Hole spacing inlet: 36 mm · Alternative version of the Pony OEM number: A2180 · Alternative version of the Pony OEM number: A5669
EUR 58,20
Collection only possible with online purchase and appointment.
