First 40 mm tuning cylinder kit suitable for the manually shifted Cilo 502 mopeds.
This 40 mm racing kit is visually indistinguishable from the original cylinder when fitted.
Augmented by the larger displacement and slightly improved timing, an increase in performance was tested in all speed ranges.
The set includes cylinder, piston kit and gasket set. The matching stud bolts are listed under accessories.
The cylinder is manufactured by the quality brand swiing – swiss ingenious.
The Meteor piston manufactured for swiing is characterized by its high-quality and precise workmanship.
- Cast iron reproduction cylinder with 40 mm bore
- sealed inlet (as original, can be drilled out)
- molded "30 Km" lettering (as original)
Matching attachments can be found in the accessories section.
The set includes the following fixed parts:
Manufacturer: swiing® revival parts · Number of components: 4 pcs · Ø cylinder: 40 mm · Hole spacing inlet: 32 mm · Ø outlet inside: 28 mm · Area of application: Tuning
Manufacturer: swiing · Material: Gray cast iron · Surface: sandblasted · Displacement: 55 ccm · Nominal diameter: 40 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Outlet type: Union nut · Number of fixing points: 4 pcs · Camouflaged: No · Area of application: Tuning
Manufacturer: swiing® ingenious parts · Nominal diameter: 40 mm · Ø outside piston (A): 39.93 mm · Ø piston pin (B): 12 mm · Compression height (C): 27.9 mm · Curvature (D): 5.1 mm · Total piston height (E): 54 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Thick piston ring: 1.65 mm · Piston weight: 93 g
Details
| Manufacturer | swiing |
| Material | Gray cast iron |
| Camouflaged | Yes |
| Surface | sandblasted |
| Area of application | Tuning |
| Nominal diameter | 40 mm |
| Thread inlet | M6x1 (standard thread) |
| Ø piston pin (B) | 12 mm |
| Outlet type | Union nut |
| Number of fixing points | 4 pcs |
Suitable for the following models
| Cilo | 502 / 502t |
Accessories & related products
Dell'Orto 16/16 SHA carburetor hand choke
Total length: 82 mm · Width: 72 mm · Height: 111 mm · Manufacturer: Dell'Orto · Material: Aluminum · Area of application: Tuning · Color: black · Nominal diameter: 16 mm · Carburetor type: SHA (type 4) · Ø without reducing sleeve: 21 mm · Ø Inside entrance: 16 mm · Ø Internal connection: 19 mm · Ø Output inside: 16 mm · Ø Air filter connection: 56 mm · Ø Air filter connection: 58.5 mm · Ø fuel hose connection: 5.1 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No · Nozzle size: 82
EUR 78,80
swiing nozzle set M5 (50 - 70) Dell'Orto SHA, PHBG
Manufacturer: swiing · Material: Brass · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA (type 3) · Carburetor type: SHA (type 4) · Total length: 8 mm · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70
EUR 23,60
swiing® revival stud bolts M6x38 inlet/outlet galvanized (10.9 strength)
Total length: 38 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Diameter: 5.9 mm · Strength class: 10.9 · Thread length: 11 mm · Thread length: 19 mm
EUR 2,25
swiing® ingenious piston 40 mm | Cilo 502
Nominal diameter: 40 mm · Manufacturer: swiing® ingenious parts · Ø outside piston (A): 39.93 mm · Compression height (C): 27.9 mm · Curvature (D): 5.1 mm · Total piston height (E): 54 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Thick piston ring: 1.65 mm · Ø piston pin (B): 12 mm · Piston weight: 93 g
EUR 78,80
swiing® ingenious 16 mm intake manifold | Cilo 502
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Surface: anodized · Color: black-matt · Number of fixing points: 2 pcs · Ø External connection: 19 mm · Ø inside: 16 mm · Hole spacing inlet: 32 mm · Mounting type: Screws
EUR 55,00
Moped fans like you also bought:
Dell'Orto 16/16 SHA carburetor hand choke
Total length: 82 mm · Width: 72 mm · Height: 111 mm · Manufacturer: Dell'Orto · Material: Aluminum · Area of application: Tuning · Color: black · Nominal diameter: 16 mm · Carburetor type: SHA (type 4) · Ø without reducing sleeve: 21 mm · Ø Inside entrance: 16 mm · Ø Internal connection: 19 mm · Ø Output inside: 16 mm · Ø Air filter connection: 56 mm · Ø Air filter connection: 58.5 mm · Ø fuel hose connection: 5.1 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No · Nozzle size: 82
EUR 78,80
swiing® ingenious piston 40 mm | Cilo 502
Nominal diameter: 40 mm · Manufacturer: swiing® ingenious parts · Ø outside piston (A): 39.93 mm · Compression height (C): 27.9 mm · Curvature (D): 5.1 mm · Total piston height (E): 54 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Thick piston ring: 1.65 mm · Ø piston pin (B): 12 mm · Piston weight: 93 g
EUR 78,80
swiing® ingenious 16 mm intake manifold | Cilo 502
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Surface: anodized · Color: black-matt · Number of fixing points: 2 pcs · Ø External connection: 19 mm · Ø inside: 16 mm · Hole spacing inlet: 32 mm · Mounting type: Screws
EUR 55,00
Collection only possible with online purchase and appointment.
