High-quality sprocket made of high-strength EN AW 7075 aluminium, black anodized, suitable for all mopeds with Rücktritt wheel.
Milled from a single piece - absolutely perfect fit.
Made by the quality brand swiing - swiss ingenious.
The mortised locating pins simplify installation and guarantee that the rim is positioned in the center of the wheel hub.
Internal diameter: 94 mm
Pitch circle diameter: 105.5 mm
We recommend replacing the complete chain kit. In other words, sprocket, pinion and drive chain. This significantly increases the service life of the sprocket.
Details
| Manufacturer | swiing |
| Material | Aluminum |
| Surface | anodized |
| Chain type | 415H |
| Color | black |
| Ø inside | 94 mm |
| Chain pitch | 1/2" x 3/16" |
| Number of teeth | 45 pcs |
| Number of fixing points | 4 pcs |
| Ø bolt circle | 105.5 mm |
Suitable for the following models
| Puch | |
| Sachs | |
| Zündapp Belmondo | |
| Cilo |
Accessories & related products
Hot 
Wippermann drive chain No.18 (double reinforced)
Manufacturer: Wippermann · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 114 pcs · Chain type: 415H · Rolling circumference: 1448 mm · Chain pitch: 1/2" x 3/16" · Chain lock type: Spring lock · Ø bore: 4.2 mm · Ø Pin: 4.15 mm
EUR 39,70
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Number of chain links: 114 pcs · Chain type: 415H · Rolling circumference: 1448 mm · Color: gray · Chain pitch: 1/2" x 3/16" · Chain lock type: Spring lock · Ø bore: 4.05 mm · Ø Pin: 4 mm
EUR 22,20
Motorex chain spray Road 500 ml
Manufacturer: Motorex · Oil type: fully synthetic · Area of application: Chemistry · Area of application: Road use · Contents [ml]: 500 ml · Hazard warning: Causes skin irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous
EUR 25,70
EUR 51,40/l
swiing® revival screw set for sprocket mounting coaster brake
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Material: Steel · Surface: blank · Surface: galvanized (blue) · Color: gray · Thread type: M6x1 (standard thread) · Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 8 mm · Width across flats SW: 10 mm · Thread length: 12 mm · Shank: No · Number of components: 12 pcs
EUR 23,30
ESJOT chain kit | Puch X30 Sport / Velux
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Manufacturer: GPO · Material: Steel · Pinion sizes: 9 pcs · Pinion sizes: 10 pcs · Pinion sizes: 11 pcs · Pinion sizes: 12 pcs · Pinion sizes: 13 pcs · Pinion sizes: 14 pcs · Pinion sizes: 15 pcs · Pinion sizes: 16 pcs · Pinion sizes: 17 pcs · Pinion sizes: 18 pcs · Pinion sizes: 19 pcs · Pinion sizes: 20 pcs · Pinion sizes: 21 pcs · Sprocket sizes: 34 pcs · Sprocket sizes: 37 pcs · Sprocket sizes: 40 pcs · Sprocket sizes: 45 pcs · Sprocket sizes: 50 pcs
EUR 105,40
Moped fans like you also bought:
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Ø cylinder: 38 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Candle thread: short · Decompressor: No · Total length: 135 mm · Width: 125 mm · Height: 55 mm · Area of application: Standard
EUR 38,60
Adhesive kit tank & frame black PVC carrier film | Puch Maxi S
Material: Polyvinyl chloride (PVC-U_hard) · Color: black · Color: white · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Place of use: Frame (+ tank) · Width: 123 mm · Width: 230 mm · Width: 330 mm · Height: 26 mm · Height: 60 mm · Height: 65 mm
EUR 11,00
swiing® revival wheel bearing 25/37/6.3 coaster wheel
Bearing type: Ball ring · Stock number: K042 · Ø inside: 25 mm · Ø outside: 36 mm · Width: 6.8 mm · Inner ring width: 25 mm · Ball bearing closed: No · Manufacturer: swiing® revival parts · Bearing cage: "-" Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Area of application: Standard
EUR 9,25
Collection only possible with online purchase and appointment.
