Wheel bearing set with M12 x 1 mm thread for the front or rear wheel of your moped, moped or small motorcycle.
The set consists of a cone (2 pieces), bearing shell (2 pieces), dust disk (2 pieces) and ball (13 pieces).
The bearing cones and bearing shells are hardened by gas nitriding and can withstand the highest loads.
Bearing cones:
Spindle width: 15 mm
Height: 14.15 mm
Ø outer: 19.90 mm
Bearing shells:
Ø outer: 29 mm
Ø inner: 25.85 mm
Height: 10.6 mm
The 3/16" (Ø 4.78 mm) bearing balls are perfectly designed for the raceway of the bearing rings.
The two dust rings ensure that no grease escapes and no dust or dirt enters the bearing raceway.
Corresponding wheel axles, wheel nuts, ball bearing grease and other attachments can be found under accessories.
Nostalgic product for the highest demands from the quality brand swiing®.
The set includes the following fixed parts:
Manufacturer: swiing® revival parts · Ø outside: 29.3 mm · Ø inside: 20.7 mm
Manufacturer: swiing® revival parts · Surface: gas nitrided · Color: black · Ø outside: 19.9 mm · Ø ball [inch] / [mm]: 3/16" (4.78 mm) · Thread type: MF12x1 (fine pitch thread) · Width across flats SW: 15 mm · Height: 14.15 mm
Manufacturer: swiing® revival parts · Material: Steel · Surface: gas nitrided · Ø outside: 29 mm · Ø inside: 25.85 mm · Height: 10.6 mm
Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Area of application: Standard · Ø ball [inch] / [mm]: 3/16" (4.78 mm) · Number of components: 26 pcs
Details
| Ø inside | 25.85 mm |
| Ø outside | 19.9 mm, 29 mm |
| Width across flats SW | 15 mm |
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | gas nitrided |
| Ø ball [inch] / [mm] | 3/16" (4.78 mm) |
| Thread type | MF12x1 (fine pitch thread) |
| Height | 14.15 mm, 10.6 mm |
Suitable for the following models
| Puch | |
| Sachs |
Accessories & related products
Nut M12x1 x 10 SW19 Wheel nut galvanized
Thread type: MF26x1 (fine pitch thread) · Height: 10 mm · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut · Drive: External hexagon · Thread depth: 10 mm · Strength class: 8 · Width across flats SW: 19 mm
EUR 2,35
Nut M12x1 x 5 SW19 Wheel nut galvanized
Thread type: MF12x1 (fine pitch thread) · Height: 5.8 mm · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 0.5D · Drive: External hexagon · Strength class: 8 · Width across flats SW: 19 mm · Pony OEM number: A4249 · Sachs OEM number: 0242 124 000
EUR 2,10
swiing® revival wheel axle M12x1 x 165 ball bearing, galvanized version
Manufacturer: swiing® revival parts · Thread length: 40 mm · Thread length: 50 mm · Ø shaft: 11.95 mm · Material: Steel · Surface: galvanized (blue) · Shank length: 75 mm · Thread type: MF12x1 (fine pitch thread) · Total length: 165 mm
EUR 15,10
Moped fans like you also bought:
swiing® revival bottom bracket bushing nylon | Puch Maxi, X30 Sport, Velux, NG-2AH
Ø Bundle: 24.1 mm · Manufacturer: swiing® revival parts · Total length: 19 mm · Material: Nylon · Surface: blank · Color: black · Bearing type: Plain bearing · Ø outside: 20.2 mm · Ø inside: 16.2 mm · Puch OEM number: 349.1.42.005.1
EUR 2,95
Collection only possible with online purchase and appointment.
