Spacer washer 19x38x2.5 mm for the idler wheel of the 1st gear on mopeds / mopeds with Sachs 503 ABL and AB engines.
Top quality, hardened and ground.
Ø inner: 19.1 mm
Ø outer: 38 mm
Thickness: 2.5 mm
Tolerance: DIN988 (for thickness -0.03 mm permissible)
This component is also known as a shim washer, bearing washer or compensation washer, depending on the terminology used.
Further details can be found under accessories.
Nostalgic product for the highest demands of the quality brand swiing®.
Original Sachs spare part number: A1198
Details
Tolerance | DIN 988 (-0.03 mm) |
Manufacturer | swiing® revival parts |
Thickness | 2.5 mm |
Area of application | Standard |
Material | Steel |
Surface | hardened & ground |
Ø inside | 19.1 mm |
Ø outside | 38 mm |
Pony spare part no. | A1198 |
Sachs spare part no. | 0244 201 100 |
Suitable for the following models
Sachs | 503 - ABL, AB |
Accessories & related products
Motorex Automatic Motor Oil (ATF) 450 ml
Manufacturer: Motorex · Area of application: Gearbox lubrication with clutch · Oil type: ATF Dextron 3 (DEXIII) · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Temperature resistance (min.): -45 - 200 °C · Pony spare part no.: A2080 · Sachs spare part no.: 0263 014 002
EUR 11,20
EUR 24,89/l
swiing® revival engine seal | Sachs 503 AAL, ABL, AB, AC, ADV, 2AL, 2BL (A1884)
Ø inside: 87 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Width: 140 mm · Total length: 233 mm · Thickness: 0.4 mm · Number of fixing points: 9 pcs · Number of components: 1 pcs · Pony spare part no.: A1884 · Sachs spare part no.: 0250 149 100
EUR 6,10
swiing® revival gearbox cover gasket | Sachs 503 AAL, ABL, AB, AC, ADV, 2AL, 2BL (A1888)
Width: 130 mm · Total length: 200 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Thickness: 0.35 mm · Number of fixing points: 6 pcs · Pony spare part no.: A1888 · Sachs spare part no.: 0250 150 000
EUR 6,10
swiing® revival clamp body reinforced | Sachs 503 AB, AC, ADV, ABL (A1196)
Ø inside: 19 mm · Ø outside: 26.8 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: Hardened · Height: 10.9 mm · Number of teeth: 24 pcs · Pony spare part no.: A1196 · Sachs spare part no.: 0232 186 100
EUR 73,20
swiing® revival gasket set | Sachs 503 AB, AC wide wall
Manufacturer: swiing® revival parts · Material: Aluminum · Material: Copper · Material: Rubber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Ø outlet inside: 24 mm · Hole spacing outlet: 38.5 mm · Number of components: 21 pcs · Hole pattern [mm]: 56 x 56
EUR 50,60
EUR 77,30
swiing® revival thrust washer 12/38/1.5 gear wheel 1st gear | Sachs 503 AB, ABL (A5618)
Ø inside: 12 mm · Ø outside: 38 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Thickness: 1.5 mm · Pony spare part no.: A5618 · Sachs spare part no.: 0244 179 200
EUR 10,00
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Pony spare part no.: A2099 · Sachs spare part no.: 0265 100 00
EUR 9,85
GPO fork lock | Puch
Ø rotating part: 12 mm · Manufacturer: GPO · Wide locking block: 4.1 mm · Locking block length: 15.3 mm · Material: Brass · Material: Spring steel · Material: Steel · Surface: blank · Width: 17 mm · Ø outside: 12 mm · Length of turned part: 25.6 mm · Total length: 40.8 mm · Ø Pin: 8 mm
EUR 11,20
Oil seal NBR 15/30/5.5 A crankshaft | Sachs (A4215 & A5602)
Width: 5.5 mm · Simmering type: A - With rubberized outer part / one sealing lip. · Manufacturer: Sachs · Ø inside: 15 mm · Ø outside: 30 mm · Material: NBR · Surface: rubberized · Place of use: Crankshaft · Temperature resistance (min.): -30 - 100 °C · Pony spare part no.: A5602 · Sachs spare part no.: 0230 111 100
EUR 8,90
Oil seal NBR 15/30/7 B DUO | Sachs 50/2 / 503 (A1830)
Width: 7 mm · Simmering type: B DUO - With sheet metal outer casing / two sealing lips. · Manufacturer: Sachs · Ø inside: 15 mm · Ø outside: 30 mm · Material: NBR · Temperature resistance (min.): -30 - 100 °C · Pony spare part no.: A1830 · Sachs spare part no.: 0250 090 000
EUR 6,10
swiing® revival thrust washer 12/38/1.5 gear wheel 1st gear | Sachs 503 AB, ABL (A5618)
Ø inside: 12 mm · Ø outside: 38 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Thickness: 1.5 mm · Pony spare part no.: A5618 · Sachs spare part no.: 0244 179 200
EUR 10,00