Special M6 nut for fastening the sprocket to all sprocket hubs on your moped / moped.
This special design with a reduced key width of 8 mm was designed to ensure easy installation even in tight spaces.
The screw can also be used to mount the intake manifold on the Puch Velux, for example.
You can find more screws and complete sets in the accessories section.
Nostalgic product for the highest standards from the quality brand swiing®.
Details
| Drive | External hexagon |
| Width across flats SW | 8 mm |
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | galvanized (blue) |
| Nut type | Hexagon nut |
| Thread type | M6x1 (standard thread) |
| Height | 6 mm |
Suitable for the following models
| Puch | |
| Sachs | |
| Zündapp Belmondo | |
| Cilo |
Accessories & related products
swiing® revival screw set sprocket mounting galvanized | Puch Maxi
Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 10 mm · Manufacturer: swiing® revival parts · Thread length: 22 mm · Number of components: 24 pcs · Material: Steel · Surface: galvanized (blue) · Color: silver · Shank: No · Strength class: 8.8 · Thread type: M6x1 (standard thread)
EUR 9,25
swiing® revival screw set sprocket mounting Inox | Puch Maxi
Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 10 mm · Manufacturer: swiing® revival parts · Thread length: 22 mm · Number of components: 24 pcs · Material: Chrome steel (stainless steel) · Color: gray · Shank: No · Thread type: M6x1 (standard thread)
EUR 15,10
swiing® revival screw set for sprocket mounting coaster brake
Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 8 mm · Width across flats SW: 10 mm · Manufacturer: swiing® revival parts · Thread length: 12 mm · Number of components: 12 pcs · Material: Chrome steel (stainless steel) · Material: Steel · Surface: blank · Surface: galvanized (blue) · Color: gray · Shank: No · Thread type: M6x1 (standard thread)
EUR 23,30
swiing® ingenious screw set for sprocket mounting coaster brake racing
Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 8 mm · Width across flats SW: 10 mm · Manufacturer: swiing® ingenious parts · Thread length: 18 mm · Number of components: 12 pcs · Material: Chrome steel (stainless steel) · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: gray · Color: silver · Shank: No · Thread type: M6x1 (standard thread)
EUR 23,30
Moped fans like you also bought:
GPO piston 41 mm (12 mm KoBo) | Puch X30 Velux fan-cooled
Manufacturer: GPO · Ø outside piston (A): 40.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 23.2 mm · Curvature (D): 3.7 mm · Total piston height (E): 49.3 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 41 mm · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring impact: Internal fuse (IS) · Piston weight: 85 g
EUR 58,50
Hot 
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Sachs 503, Puch Velux
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Surface: blank · Carburetor type: SRE · Nominal diameter: 17 mm · Camouflaged: Yes · Ø Internal connection: 23 mm · Ø Inside entrance: 17 mm · Mounting type: Plug connection clamped · Ø Output inside: 17.1 mm · Ø Air filter connection: 23 mm · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Total length: 61.5 mm · Nozzle block: 2.2 · Width: 47 mm · Nozzle size: 74 · Height: 89 mm · Height: 112 mm · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 140,60
swiing® revival stud bolt cylinder base M6x26 - 10.9 strength | Sachs
Manufacturer: swiing® revival parts · Thread length: 9 mm · Thread length: 13 mm · Material: Steel · Surface: galvanized (blue) · Diameter: 5.8 mm · Strength class: 10.9 · Thread type: M6x1 (standard thread) · Total length: 26 mm
EUR 2,10
BAD ASS 17 mm intake manifold (short) Bing SRE | Sachs 503 2AL/2BL
Ø inside: 17.8 mm · Total length: 65 mm · Total height: 55 mm · Manufacturer: BAD ASS · Material: Aluminum · Area of application: Tuning · Camouflaged: No · Mounting type: Stud bolt · Number of fixing points: 2 pcs · Height flange center hole: 45 mm · Ø External connection: 20 mm · Hole spacing inlet: 32 mm
EUR 87,80
GPO cylinder gasket set BAD ASS Lucifer / GPO Sombrero 41 mm | Puch X30 Velux, NG-2AH
Manufacturer: GPO · Number of components: 4 pcs · Material: Aluminum · Material: Sealing paper · Area of application: Tuning · Ø cylinder: 41 mm · Ø outlet inside: 27 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Thickness: 0.4 mm · Thickness: 0.45 mm · Hole spacing outlet: 32 mm · Hole spacing inlet: 32 mm
EUR 23,30
Collection only possible with online purchase and appointment.
