This gas-nitrided washer is used for the R&R on your Puch moped / moped.
The gas-nitrided washer has a small turned shoulder on the inside diameter to enclose the snap ring.
This 3.5 mm thick shim ring is used for older rear wheel hubs where the round part of the brake anchor plate consists of a thick metal plate and not a rolled sheet metal.
In addition, the spider of these wheel hubs was welded as standard.
Ø inner: 10.7 mm
Ø outer: 19 mm
Thickness: 3.5 mm
Other accessories for your bike, such as the 7 mm thick side bearing ring, can be found under accessories.
Nostalgic product for the highest demands of the quality brand swiing®.
Original Puch spare part number: 320.4.41.020.1
Details
| Ø inside | 10.7 mm |
| Ø outside | 19 mm |
| Manufacturer | swiing® revival parts |
| Surface | gas nitrided |
| Nominal diameter (thread) | 10 mm |
| Thickness | 3.5 mm |
Suitable for the following models
| Puch | |
| Sachs | |
| Zündapp Belmondo | |
| Cilo |
Accessories & related products
swiing® revival wheel bearing 25/37/6.3 coaster wheel
Ø inside: 25 mm · Bearing cage: "-" Sheet steel cage ball-guided · Ø outside: 36 mm · Stock number: K042 · Inner ring width: 25 mm · Manufacturer: swiing® revival parts · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Area of application: Standard · Bearing type: Ball ring · Ball bearing closed: No · Width: 6.8 mm
EUR 9,25
swiing® revival wheel axle M10.5x1 x 175 coaster brake galvanized
Manufacturer: swiing® revival parts · Thread length: 34 mm · Thread length: 45 mm · Ø shaft: 10.5 mm · Material: Steel · Surface: galvanized (blue) · Shank length: 95.6 mm · Thread type: MF10.5x1 (fine pitch thread) · Total length: 175 mm
EUR 28,00
swiing® revival wheel nut M10.5x1 x 10 SW17 coaster brake Inox
Drive: External hexagon · Width across flats SW: 17 mm · Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Area of application: Standard · Nut type: Hexagon nut 1D · Surface: blank · Thread type: MF10.5x1 (fine pitch thread) · Height: 10 mm
EUR 8,10
swiing® revival ball bearing 14/27/6.3 coaster brake driver
Ø inside: 14 mm · Bearing cage: "-" Sheet steel cage ball-guided · Ø outside: 27 mm · Stock number: K1052 · Inner ring width: 7 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Bearing type: Ball ring · Surface: blank · Ball bearing closed: No
EUR 8,10
Moped fans like you also bought:
swiing® revival wheel bearing 25/37/6.3 coaster wheel
Ø inside: 25 mm · Bearing cage: "-" Sheet steel cage ball-guided · Ø outside: 36 mm · Stock number: K042 · Inner ring width: 25 mm · Manufacturer: swiing® revival parts · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Area of application: Standard · Bearing type: Ball ring · Ball bearing closed: No · Width: 6.8 mm
EUR 9,25
swiing® revival wheel nut M10.5x1 x 10 SW17 coaster brake Inox
Drive: External hexagon · Width across flats SW: 17 mm · Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Area of application: Standard · Nut type: Hexagon nut 1D · Surface: blank · Thread type: MF10.5x1 (fine pitch thread) · Height: 10 mm
EUR 8,10
swiing® revival ball bearing 14/27/6.3 coaster brake driver
Ø inside: 14 mm · Bearing cage: "-" Sheet steel cage ball-guided · Ø outside: 27 mm · Stock number: K1052 · Inner ring width: 7 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Bearing type: Ball ring · Surface: blank · Ball bearing closed: No
EUR 8,10
swiing® revival wheel axle M10.5x1 x 175 coaster brake Inox
Manufacturer: swiing® revival parts · Thread length: 34 mm · Thread length: 45 mm · Ø shaft: 10.5 mm · Material: Chrome steel (stainless steel) · Shank length: 95.6 mm · Thread type: MF10.5x1 (fine pitch thread) · Total length: 175 mm
EUR 35,10
swiing® revival wheel axle M10.5x1 x 175 coaster brake (with groove) galvanized
Manufacturer: swiing® revival parts · Thread length: 34 mm · Thread length: 45 mm · Ø shaft: 10.5 mm · Material: Steel · Surface: galvanized (blue) · Shank length: 95.6 mm · Thread type: MF10.5x1 (fine pitch thread) · Total length: 175 mm
EUR 35,10
Collection only possible with online purchase and appointment.
