Securing plates made of stainless steel for securing sprockets with 5-hole mount and 72° pitch on your moped / moped with Grimeca hub.
The pre-stressed plates are used to secure the bolts on the sprocket. During assembly, two plates must be placed on top of each other. The locking tab on the lower plate must be cut off or knocked straight.
Number of plates: 3 pcs.
Thickness: 1 mm
Pitch: 72°
Pitch circle: 115 mm
Number of fixing points: 5 pcs.
Material: Chrome steel (stainless steel)
Matching sprockets and screw sets can be found in the accessories section.
Nostalgic product for the highest demands from the quality brand swiing®.
Details
| Manufacturer | swiing® revival parts |
| Material | Chrome steel (stainless steel) |
| Thickness | 1 mm |
| Number of lobes | 6 pcs |
| Ø bolt circle | 115 mm |
Suitable for the following models
| Universal | |
| Puch | |
| Sachs |
Accessories & related products
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Rolling circumference: 1448 mm · Number of chain links: 114 pcs · Chain lock type: Spring lock · Color: gray · Ø bore: 4.05 mm · Ø Pin: 4 mm
EUR 21,30
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Area of application: Chemistry · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Color: blue · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 24,70
EUR 2.470,00/l
ESJOT sprocket 51 teeth Grimeca (5-hole) galvanized
Ø inside: 98 mm · Manufacturer: ESJOT · Material: Steel · Color: silver · Surface: blue galvanized · Chain type: 415H · Chain pitch: 1/2" x 3/16" · Number of teeth: 51 pcs · Number of fixing points: 5 pcs · Ø mounting hole: 6.5 mm · Cranking (offset): 8 mm
EUR 45,00
ESJOT sprocket 45 teeth galvanized Grimeca (5-hole)
Ø inside: 98 mm · Manufacturer: ESJOT · Material: Steel · Color: silver · Surface: blue galvanized · Chain type: 415H · Chain pitch: 1/2" x 3/16" · Number of teeth: 45 pcs · Number of fixing points: 5 pcs · Ø mounting hole: 6.5 mm · Cranking (offset): 8 mm · Ø bolt circle: 115 mm
EUR 45,00
ESJOT sprocket 41 teeth Grimeca (5-hole)
Ø inside: 98 mm · Manufacturer: ESJOT · Material: Steel · Color: silver · Surface: blue galvanized · Chain type: 415H · Chain pitch: 1/2" x 3/16" · Number of teeth: 41 pcs · Number of fixing points: 5 pcs · Ø mounting hole: 6.5 mm · Cranking (offset): 8 mm · Ø bolt circle: 115 mm
EUR 45,00
Moped fans like you also bought:
Magura cable clamp Ø 8 x 15 mm
Total length: 15 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: blue galvanized · Surface: nickel-plated · Area of application: Standard · Thread type: M6x1 (standard thread) · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Ø Bundle: 6 mm · Ø outside: 8 mm · Thread length: 7 mm · Width across flats SW: 7 mm
EUR 2,80
GPO fork lock | Puch
Width: 17 mm · Ø rotating part: 12 mm · Manufacturer: GPO · Wide locking block: 4.1 mm · Locking block length: 15.3 mm · Material: Brass · Material: Spring steel · Material: Steel · Surface: blank · Ø outside: 12 mm · Total length: 40.8 mm · Length of turned part: 25.6 mm · Ø Pin: 8 mm
EUR 11,20
swiing® revival snap ring low control bearing set (version 2.0)
Height: 7 mm · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: blank · Thickness: 0.6 mm · Nominal diameter: 20 mm · Nominal diameter: 28 mm · Puch spare part no.: 349.1.30.015.1 · Sachs spare part no.: P0521
EUR 2,80
Magura set screw M6x34 mm lock nut SW8
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: blue galvanized · Surface: nickel-plated · Ø cable holder: 3.05 mm · Thread type: M6x1 (standard thread) · Slotted: No · Total length: 34 mm · Width across flats Screw: 8 mm · Thread length: 24 mm · Ø Receptacle: 7.05 mm · Width across flats nut: 8 mm
EUR 2,80
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Total length: 6 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Ø outside: 5 mm · Thread length: 4 mm
EUR 2,25
Magura set screw M5x34 mm
Slotted: No · Manufacturer: Magura · Ø cable holder: 2.55 mm · Width across flats nut: 8 mm · Width across flats Screw: 8 mm · Material: Brass · Surface: nickel-plated · Thread type: M5x0.8 (standard thread) · Thread length: 24 mm · Ø Receptacle: 7.05 mm · Total length: 34 mm
EUR 2,80
Handlebar stem 35 cm curved with chrome strut
Manufacturer: Made in Germany · Material: Steel · Surface: chrome-plated · Color: Chrome · Width: 710 mm · Ø outside: 22 mm · Height: 350 mm · Length handlebar ends: 140 mm · Mounting type: Front boom mounting · Crossbar: Yes · Clamping diameter: 25 mm
EUR 38,90
Collection only possible with online purchase and appointment.
