Complete fork lock set for various Puch forks.
The mounting block for the fork lock is made of iron and is CNC machined from solid material.
The block is welded to the fork.
With original forks, this mounting block is often rusted or worn out.
Our product is the perfect alternative and ensures that the fork lock can be operated cleanly and without jamming.
Scope of delivery as shown in image 1 (block, notched nail and fork lock incl. 2 keys).
Nostalgic product for the highest demands of the quality brand swiing®.
The set includes the following fixed parts:
Manufacturer: swiing® revival parts
Manufacturer: GPO · Material: Steel · Surface: blank · Area of application: Standard · Ø Pin: 2.75 mm · Nominal diameter: 2.5 mm · Ø External head: 5 mm · Total length: 10 mm
Manufacturer: GPO · Material: Brass, Steel, Spring steel · Surface: blank · Total length: 40.8 mm · Length of turned part: 25.6 mm · Locking block length: 15.3 mm · Ø outside: 12 mm · Ø rotating part: 12 mm · Ø Pin: 8 mm · Width: 17 mm · Wide locking block: 4.1 mm
Details
| Manufacturer | swiing® revival parts |
| Material | Steel, Brass |
Suitable for the following models
| Puch |
Moped fans like you also bought:
Clutch 3-jaw aluminum | Puch E50
Material: Aluminum · Material: Steel · Material addition: Composite materials · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Ø inside: 12 mm · Ø inside: 14.6 mm · Ø outside: 93 mm · Thickness: 20.9 mm · Area of application: Original · Area of application: Standard
EUR 57,60
Not so nice 
Chrome luggage rack | Puch Maxi S
Material: Steel · Surface: chrome-plated · Width: 168 mm · Wheel size [inch]: 17 " · Mounting type: Nuts & bolts · Number of fixing points: 4 pcs · Total length: 425 mm · Color: Chrome · Ø mounting hole: 8.3 mm · Ø mounting hole: 9 mm · Height: 32.5 mm · Hole spacing: 29 mm
EUR 23,00
GPO fork lock | Puch
Ø rotating part: 12 mm · Manufacturer: GPO · Wide locking block: 4.1 mm · Locking block length: 15.3 mm · Material: Brass · Material: Spring steel · Material: Steel · Surface: blank · Width: 17 mm · Ø outside: 12 mm · Total length: 40.8 mm · Length of turned part: 25.6 mm · Ø Pin: 8 mm
EUR 11,40
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: powder-coated · Ø inside: 94 mm · Thickness: 4.5 mm · Number of fixing points: 6 pcs · Number of teeth: 45 pcs · Color: black · Ø bolt circle: 105.5 mm · Ø mounting hole: 6.7 mm · Hole spacing: 36.5 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm
EUR 23,00
NTN wheel bearing 12/28/8 rear cast hub Leleu | Puch Maxi
Bearing cage: "-" Sheet steel cage ball-guided · Inner ring width: 12 mm · Manufacturer: NTN · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CM (special/noise-reduced) · Groove ring: No · Material: Plastic · Material: Steel · Surface: blank · Width: 8 mm · Ø outside: 28 mm · Stock number: 6001 · Bearing type: Deep groove ball bearing · Ø inside: 12 mm · Area of application: Standard · Ball bearing closed: Yes
EUR 6,80
Collection only possible with online purchase and appointment.
