Dust ring suitable for all bicycles with Sachs HR 90 V hubs, which are installed on Sachs 50/2, Sachs 503, Puch X30 Sport NS / NL, Puch X30 Velux and Zündapp Belmondo mopeds / mopeds, among others.
The cover is pressed into the driver, it may only be pressed in so deeply that the bearing ring underneath can still rotate freely.
Note: Due to the long production time of the drivers, there were tolerance deviations and different designs. This type B dust ring is especially suitable for drivers with an internal chamfer of approx. 1 mm. See figure 3. For drivers with a fine chamfer, use the type A dust ring. The driver is not included in the scope of delivery.
You can find the type-A dust cover mentioned above and other accessories in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
Original Puch spare part number: 320.5.41.012.1
Original Sachs spare part number: F1652
Details
| Manufacturer | swiing® revival parts |
| Ø inside | 20.4 mm |
| Ø outside | 28.2 mm |
| Height | 4.2 mm |
| Puch OEM number | 320.5.41.012.1 |
| Sachs OEM no. | F1652 |
Suitable for the following models
| Puch | |
| Sachs | |
| Zündapp Belmondo | |
| Cilo |
Accessories & related products
swiing® revival wheel bearing 25/37/6.3 coaster wheel
Bearing type: Ball ring · Stock number: K042 · Ø inside: 25 mm · Ø outside: 36 mm · Width: 6.8 mm · Inner ring width: 25 mm · Ball bearing closed: No · Manufacturer: swiing® revival parts · Bearing cage: "-" Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Area of application: Standard
EUR 9,10
swiing® revival ball bearing 14/27/6.3 coaster brake driver
Bearing type: Ball ring · Stock number: K1052 · Ø inside: 14 mm · Ø outside: 27 mm · Inner ring width: 7 mm · Ball bearing closed: No · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Bearing cage: "-" Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Surface: blank
EUR 7,95
swiing® revival wheel axle M10.5x1 x 175 coaster brake (with groove) galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø shaft: 10.5 mm · Shank length: 95.6 mm · Thread type: MF10.5x1 (fine pitch thread) · Thread length: 34 mm · Thread length: 45 mm · Total length: 175 mm
EUR 34,50
swiing® revival bearing cone M10.5x1 back pedal
Manufacturer: swiing® revival parts · Material: Steel · Surface: gas nitrided · Ø outside: 17.7 mm · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Width across flats SW: 15 mm · Height: 13.3 mm · Thread type: MF10.5x1 (fine pitch thread) · Puch OEM number: 320.2.41.014.1
EUR 34,50
Not in stock
Moped fans like you also bought:
swiing® revival wheel bearing 25/37/6.3 coaster wheel
Bearing type: Ball ring · Stock number: K042 · Ø inside: 25 mm · Ø outside: 36 mm · Width: 6.8 mm · Inner ring width: 25 mm · Ball bearing closed: No · Manufacturer: swiing® revival parts · Bearing cage: "-" Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Area of application: Standard
EUR 9,10
swiing® revival ball bearing 14/27/6.3 coaster brake driver
Bearing type: Ball ring · Stock number: K1052 · Ø inside: 14 mm · Ø outside: 27 mm · Inner ring width: 7 mm · Ball bearing closed: No · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Bearing cage: "-" Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Surface: blank
EUR 7,95
Collection only possible with online purchase and appointment.
