Set of clamping shells for mounting the handlebars on the fork plate of original and reproduction forks of various Puch mopeds / mopeds.
External dimensions (lxwxh): 47 x 17 x 26 mm
Hole spacing: 30 mm
Hole diameter: 7.3 mm
Material: aluminium, red anodized
Matching fastening screws, fork clamps and other fastening clamps can be found in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® revival parts |
| Material | Aluminum |
| Surface | anodized |
| Color | red |
| Total length | 47 mm |
| Width | 17 mm |
| Height | 26 mm |
| Number of fixing points | 2 pcs |
| Hole spacing | 30 mm |
| Ø mounting hole | 7.3 mm |
Suitable for the following models
| Puch |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Type of application: 1K · Area of application: Chemistry · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Contents [ml]: 10 ml · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 24,70
EUR 2.470,00/l
Screw M7x40 cylinder head Allen key galvanized (clamping bridge)
Manufacturer: Made in Italy · Material: Steel · Surface: blue galvanized · Drive: Hexagon socket · Screw head: Cylinder head · Width across flats SW: 6 mm · Shank: No · Strength class: 8.8 · Thread type: M7x1 (standard thread) · Thread length: 40 mm
EUR 2,70
Hot 
66HEROES Clamping bridges aluminum black | Puch
Manufacturer: 66HEROES · Material: Aluminum · Surface: anodized · Color: black-matt · Width: 22 mm · Height: 26 mm · Number of fixing points: 2 pcs · Ø mounting hole: 7.3 mm · Hole spacing: 30 mm · Total length: 49 mm · Clamping diameter: 22 mm
EUR 32,60
Moped fans like you also bought:
Handlebar fork plate 40 cm curved with chrome strut
Manufacturer: Made in Germany · Material: Steel · Surface: chrome-plated · Color: Chrome · Fork plate holder length: 100 mm · Width: 730 mm · Ø outside: 22 mm · Height: 400 mm · Length handlebar ends: 150 mm · Mounting type: Fork plate · Crossbar: Yes · Clamping diameter: 22 mm
EUR 39,30
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Area of application: Gearbox lubrication with clutch · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift
EUR 11,20
EUR 24,89/l
Hot
swiing 15 mm carburetor tuning camouflaged | Puch
Manufacturer: swiing · Material: Aluminum · Camouflaged: Yes · Area of application: Tuning · Carburetor type: SRE · Total length: 66 mm · Nominal diameter: 15 mm · Width: 50 mm · Ø Internal connection: 20 mm · Height: 95 mm · Ø Inside entrance: 15 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle block: 2.17 · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
EUR 90,10
Handlebar fork plate 30 cm curved with strut solid black
Material: Steel · Color: black · Surface: varnished · Fork plate holder length: 80 mm · Width: 640 mm · Ø outside: 22 mm · Height: 280 mm · Mounting type: Fork plate · Length handlebar ends: 190 mm · Crossbar: Yes · Clamping diameter: 22 mm
EUR 65,30
Collection only possible with online purchase and appointment.
