Gas cable pipe bend incl. cable adjusting screw suitable for various mopeds, mopeds and small motorcycles with Bing or Dell'Orto carburettors.
The gas cable guide pipe has an M6 x 0.75 mm mounting thread.
Other carburetor elbows and throttle cables can be found in the accessories section.
Nostalgic product for the highest demands from the quality brand swiing®.
Details
| Manufacturer | swiing® revival parts, BING |
| Material | Brass |
| Component group Carburetor | Adjusting screws, float, etc. |
| Surface | nickel-plated |
| Angle | 80 ° |
| Total length | 41.5 mm, 50 mm |
| Height | 35 mm |
| Internal thread | MF5x0.75 (fine pitch thread) |
| Ø outside | 6 mm |
| Thread type | MF6x0.75 (fine pitch thread) |
| Width across flats nut | 8 mm, 7 mm |
Suitable for the following models
| Universal | |
| Puch | E50 ZA50 (Fahrtwindgekühlt) ZA50 (Gebläsegekühlt) Z50 (X30 Sport) Z50 (X30 Velux) 2-Gang MS, MV, MV50 3-Gang VSD, DS, VZ, MC |
| Sachs | 503 - AAL, ABL, 2AL / 2BL, AB, AC 504 (ohne Tretwelle) 505 (mit Tretwelle) - 1A (AT), 2 A (HG) 508 - 1 A 535 |
| Pony / Cilo (Beta 521 & 512) | Beta 512 Beta diverse Beta 514 Beta 518 Beta 521 (Motor) |
| Zündapp Belmondo | |
| Kreidler | Flory MF |
Accessories & related products
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Area of application: Standard · Cable length: 2200 mm
EUR 3,30
Dell'Orto 90° carburetor pipe bend set M6x0.75
Manufacturer: Dell'Orto · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Ø outside: 6 mm · Angle: 90 ° · Total length: 43 mm · Total length: 52 mm · Height: 27 mm · Internal thread: MF5x0.75 (fine pitch thread) · Thread type: MF6x0.75 (fine pitch thread) · Width across flats nut: 7 mm
EUR 13,90
GPO 70° carburetor pipe bend M6x0.75
Manufacturer: GPO · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Ø outside: 6 mm · Angle: 70 ° · Total length: 35 mm · Total length: 41.5 mm · Height: 36 mm · Height: 37 mm · Internal thread: M5x0.8 (standard thread) · Thread type: MF6x0.75 (fine pitch thread) · Width across flats nut: 8 mm
EUR 5,70
43° cable pull pipe bend
Manufacturer: Made in Germany · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Ø outside: 6 mm · Ø outside: 10 mm · Angle: 43 ° · Total length: 63.5 mm · Total length: 72.5 mm · Height: 26 mm · Thread type: MF6x0.75 (fine pitch thread)
EUR 9,25
90° carburetor pipe bend M6x0.75 Dell'Orto SHA original | Piaggio Ciao
Manufacturer: Piaggio · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Ø outside: 6 mm · Angle: 90 ° · Total length: 27.5 mm · Height: 30 mm · Internal thread: MF5x0.75 (fine pitch thread) · Thread type: MF6x0.75 (fine pitch thread)
EUR 5,70
Nut carburetor pipe bend Dell'Orto SHA carburetor original | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Piaggio · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut · Width across flats SW: 8 mm · Drive: External hexagon · Height: 3 mm · Thread type: MF6x0.75 (fine pitch thread)
EUR 2,80
Moped fans like you also bought:
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø outside: 8 mm · Width across flats SW: 7 mm · Total length: 15 mm · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Ø Bundle: 6 mm · Screw head: Hexagon · Area of application: Standard · Thread type: M6x1 (standard thread) · Thread length: 7 mm
EUR 2,90
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Area of application: Standard · Cable length: 2200 mm
EUR 3,30
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Area of application: Standard · Cable length: 2200 mm
EUR 2,80
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Ø outside: 5 mm · Number of components: 2 pcs · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm
EUR 2,35
GPO 85° carburetor pipe bend brass M6x0.75
Manufacturer: GPO · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Ø outside: 6 mm · Angle: 85 ° · Total length: 45.5 mm · Total length: 53.5 mm · Height: 30 mm · Internal thread: MF6x0.75 (fine pitch thread) · Thread type: MF6x0.75 (fine pitch thread) · Width across flats nut: 8 mm · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
EUR 6,90
Dell'Orto 45° carburetor pipe bend M6x0.75
Manufacturer: Dell'Orto · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Ø outside: 6 mm · Angle: 45 ° · Total length: 34.5 mm · Total length: 42 mm · Height: 56 mm · Height: 61 mm · Internal thread: MF5x0.75 (fine pitch thread) · Thread type: MF6x0.75 (fine pitch thread) · Width across flats nut: 8 mm
EUR 8,05
swiing® revival 90° carburetor pipe bend M6x0.75
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Ø outside: 6 mm · Angle: 90 ° · Total length: 40 mm · Total length: 49 mm · Height: 32 mm · Internal thread: MF5x0.75 (fine pitch thread) · Thread type: MF6x0.75 (fine pitch thread) · Width across flats nut: 7 mm · Width across flats nut: 8 mm
EUR 8,05
Not in stock
Collection only possible with online purchase and appointment.
