38 mm (50cc) racing cylinder kit suitable for your Puch Maxi S / N, Puch X30 Sport NS/NL, Puch X30 Sport NG-2A, as well as Puch Supermaxi moped, moped or small motorcycle.
If you want the complete kit, select this in the selection field to also receive the matching cylinder head.
In terms of appearance, this racing cylinder is indistinguishable from the original. The cast-in "CH12" and original-sized cooling fins ensure optimum protection from the racing authorities. Detailed instructions for correct installation and running-in are included.
This racing kit should preferably be used with a 22 mm exhaust, i.e. a 2-bend or 22 mm manifold, so that the exhaust gases can also be transported away and no heat build-up occurs.
&Revised version: The sealing surfaces of the inlet and outlet have been enlarged so that a large 28 mm flame tube can also be fitted without any problems (Fig. 7). There is also no longer any protrusion from the piston and the cylinder has been adapted accordingly. Last but not least, the inlet gasket has also been reworked.
Nostalgic product for the highest demands of the quality brand swiing®.
The set includes the following fixed parts:
Hole pattern [mm]: 44 x 44 · Inlet window: 23.4 x 14.7 · Manufacturer: swiing® revival parts · Material: Cast aluminum · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 38 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 20 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Decompressor: Yes · Camouflaged: Yes · Area of application: Tuning
Details
Manufacturer | swiing® revival parts |
Camouflaged | Yes |
Area of application | Tuning |
Material | Cast aluminum |
Surface | sandblasted |
Displacement | 50 ccm |
Nominal diameter | 38 mm |
Outlet type | straight |
Number of fixing points | 4 pcs |
Alternative version of the Puch spare part no. | 349.7.10.105.0 |
Suitable for the following models
Puch | E50 ZA50 (Fahrtwindgekühlt) Z50 (X30 Sport) |
Accessories & related products
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Height: 55 mm · Width: 125 mm · Total length: 135 mm · Manufacturer: GPO · Material: Aluminum · Area of application: Standard · Surface: sandblasted · Ø cylinder: 38 mm · Candle thread: short · Number of fixing points: 4 pcs · Decompressor: No · Hole pattern [mm]: 44 x 44
EUR 37,10
GPO gasket set cylinder original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Ø cylinder: 38 mm · Hole spacing inlet: 32 - 38 mm · Ø outlet inside: 22 mm · Hole spacing outlet: 42 mm · Decompressor: Yes · Number of components: 4 pcs · Hole pattern [mm]: 44 x 44 mm
EUR 8,35
swiing® revival piston 38 mm Vertex | Puch
Manufacturer: Vertex · Manufacturer: swiing® revival parts · Ø outside piston (A): 37.96 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.45 mm · Curvature (D): 3.5 mm · Total piston height (E): 50.45 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 38 mm · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 1.5 mm · Thick piston ring: 1.6 mm · Tolerance group: A
EUR 67,50
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Bearing type: Needle roller and cage assembly · Ø inside: 12 mm · Ø outside: 15 mm · Manufacturer: swiing® ingenious parts · Bearing cage: Silver cage · Width: 14.2 mm · Dimension needle bearing: 12/15 x 14.2 · Alternative version of the Pony Spare part no.: A4222 · Tomos spare part no.: 035548 · Alternative version of Sachs spare part no.: 0232 157 001
EUR 13,40
Moped fans like you also bought:
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Height: 55 mm · Width: 125 mm · Total length: 135 mm · Manufacturer: GPO · Material: Aluminum · Area of application: Standard · Surface: sandblasted · Ø cylinder: 38 mm · Candle thread: short · Number of fixing points: 4 pcs · Decompressor: No · Hole pattern [mm]: 44 x 44
EUR 37,10
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm
EUR 3,15
Motorex Automatic Motor Oil (ATF) 450 ml
Manufacturer: Motorex · Area of application: Gearbox lubrication with clutch · Oil type: ATF Dextron 3 (DEXIII) · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Temperature resistance (min.): -45 - 200 °C · Pony spare part no.: A2080 · Sachs spare part no.: 0263 014 002
EUR 11,20
EUR 24,89/l
swiing® revival set stud bolts M6 x 106 mm | Puch
Diameter: 5.9 mm · Total length: 106 mm · Width across flats SW: 10 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Thread type: M6x1 (standard thread) · Drive: External hexagon · Thread length: 13 mm · Thread length: 18.5 mm · Alternative version of the Puch spare part no.: 360.1.10.034.1
EUR 8,35
swiing 15 mm carburetor tuning camouflaged | Puch
Width: 50 mm · Total length: 66 mm · Height: 95 mm · Nominal diameter: 15 mm · Manufacturer: swiing · Material: Aluminum · Area of application: Tuning · Camouflaged: Yes · Carburetor type: SRE · Mounting type: Plug connection clamped · Nozzle thread: M3.5 · Ø Internal connection: 20 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle block: 2.17 · Clamping screw torque (max.): 4 N/m
EUR 90,10
swiing® ingenious 15 mm intake manifold camouflaged (Version 2.0) | Puch E50
Total height: 53 mm · Manufacturer: swiing® ingenious parts · Ø inside: 15 mm · Material: Aluminum · Area of application: Tuning · Camouflaged: Yes · Total length: 46 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Height flange center hole: 43 mm · Ø External connection: 20 mm
EUR 39,30