Strengthened compression spring for the original fork on your Puch Maxi S / N, Puch X30 Sport NS / NL, Puch X30 Velux, Puch X30 NG-2AH and Puch Supermaxi LG1 / LG2 (Cat) moped / moped.
The coil spring is 25% harder than the original and is particularly suitable for tuned bikes where the fork is exposed to high loads.
Ø inner: 13 mm
Ø outer: 19 mm
Length: 190 mm
Wire thickness: 3 mm
Price per piece.
Further attachments for the original suspension fork can be found in the accessories section.
Exceptional product for the highest demands of the quality brand swiing®.
Spare part number of the original spring: 349.2.30.134.1
Details
| Ø wire | 3 mm |
| Manufacturer | swiing® ingenious parts |
| Ø inside | 13 mm |
| Color | red |
| Ø outside | 19 mm |
| Total length | 190 mm |
| Puch OEM number | 349.2.30.134.1 |
Suitable for the following models
| Puch |
Accessories & related products
Moped fans like you also bought:
Karcoma fuel tap M12x1 vertical (with union nut) 2 connections
Manufacturer: Karcoma · Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: vertical / vertical · Outlet direction: any · Spare tube shape: straight · Mounting type: Union nut · Reserve level: 50 mm
EUR 26,80
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM number: 0265 100 00
EUR 10,30
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Drive: External hexagon · Drive: Slot · Ø Cable bushing: 2.3 mm · Ø outside: 8 mm · Screw head: Hexagon · Ø Bundle: 6 mm · Total length: 15 mm · Width across flats SW: 7 mm · Thread type: M6x1 (standard thread) · Thread length: 7 mm · Area of application: Standard
EUR 2,95
NTN wheel bearing 12/28/8 rear cast hub Leleu | Puch Maxi
Bearing type: Deep groove ball bearing · Bearing cage: "-" Sheet steel cage ball-guided · Stock number: 6001 · Inner ring width: 12 mm · Manufacturer: NTN · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CM (special/noise-reduced) · Groove ring: No · Material: Plastic · Material: Steel · Surface: blank · Width: 8 mm · Ø outside: 28 mm · Ø inside: 12 mm · Area of application: Standard · Ball bearing closed: Yes
EUR 6,90
NTN 6201 2RS ball bearing 12/32/10
Bearing type: Deep groove ball bearing · Bearing cage: "-" Sheet steel cage ball-guided · Stock number: 6201 · Inner ring width: 10 mm · Manufacturer: NTN · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CN (standard) · Width: 10 mm · Ø outside: 32 mm · Ø inside: 12 mm · Ball bearing closed: Yes
EUR 11,60
Collection only possible with online purchase and appointment.
