Centring bushes made of aluminium, red anodized, for clean mounting of the cylinder cover on Puch Maxi S / N, Puch X30 NS / NL, Puch X30 N-2AH mopeds / mopeds.
The bushes can be used on all Puch cylinder heads in conjunction with conventional M6 threaded studs.
They are pushed into the holes in the cylinder cover so that they protrude slightly above the sealing surface (see Figure 2 for illustration).
We recommend that you glue the guide bushes into the cylinder head with Loctite adhesive so that they do not move during assembly/disassembly.
Now the cylinder head can be pushed perfectly centered onto the stud bolts.
You can find the corresponding cylinder heads, stud bolts, cylinder head gaskets, Loctite, etc. in the accessories section.
Exceptional product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® ingenious parts |
| Material | Aluminum |
| Surface | anodized |
| Nominal diameter inside | 6 mm |
| Total length | 15 mm |
| Ø inside | 6.25 mm |
| Ø outside | 7.4 mm |
Suitable for the following models
| Puch | E50 ZA50 (Fahrtwindgekühlt) Z50 (X30 Sport) |
Accessories & related products
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Ø cylinder: 38 mm · Total length: 135 mm · Candle thread: short · Hole pattern [mm]: 44 x 44 · Width: 125 mm · Height: 55 mm · Number of fixing points: 4 pcs · Decompressor: No · Area of application: Standard
EUR 38,60
GPO 45 mm cylinder head tuning Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Area of application: Tuning · Material: Aluminum · Surface: sandblasted · Ø cylinder: 45 mm · Total length: 135 mm · Width: 125 mm · Height: 55 mm · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: Yes
EUR 38,70
Loctite 638 High-strength adhesive 10 ml
Temperature resistance (min.): -75 - 150 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Color: green · Hazard warning: Causes serious eye damage · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Danger · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Adhesion: high-strength · Area of application: Chemistry · Type of application: 1K · Gap dimension (max.): 0.25 mm · Alignment time: 300 sec · Breakaway torque (according to material): 23 N/m · Breakaway torque (according to material): 25 N/m · Breakaway torque (according to material): 57 N/m
EUR 25,70
EUR 2.570,00/l
GPO 38 mm cylinder head Puch original (Maxi S, N | X30 NS, NL, N-2AH) black
Manufacturer: GPO · Material: Aluminum · Surface: varnished · Width: 125 mm · Total length: 135 mm · Ø cylinder: 38 mm · Height: 55 mm · Area of application: Original · Number of fixing points: 4 pcs · Decompressor: No
EUR 50,30
GPO 45 mm cylinder head Puch Tuning (Maxi S, N | X30 NS, NL, N-2AH) black
Manufacturer: GPO · Material: Aluminum · Surface: varnished · Width: 125 mm · Total length: 135 mm · Ø cylinder: 45 mm · Height: 55 mm · Area of application: Tuning · Number of fixing points: 4 pcs · Decompressor: No · Camouflaged: Yes
EUR 50,30
Moped fans like you also bought:
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Ø cylinder: 38 mm · Total length: 135 mm · Candle thread: short · Hole pattern [mm]: 44 x 44 · Width: 125 mm · Height: 55 mm · Number of fixing points: 4 pcs · Decompressor: No · Area of application: Standard
EUR 38,60
GPO gasket set | Puch E50
Manufacturer: GPO · Area of application: Standard · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes
EUR 11,60
swiing® revival stud bolt set M6 x 106 mm | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.9 mm · Drive: External hexagon · Width across flats SW: 10 mm · Thread type: M6x1 (standard thread) · Total length: 106 mm · Thread length: 13 mm · Thread length: 18.5 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8,70
Hot 
VEC electronic ignition coil (replaces ignition coil, capacitor & contact breaker)
Place of use: Internal (in the ignition) · Manufacturer: VEC · Ø cable holder: 5 mm · Color: black · Ø mounting hole: 4.6 mm · Ø Internal flywheel: 90 mm · Cable length: 140 mm · Cable length: 420 mm · Total length: 77 mm · Height: 48 mm · Hole spacing: 54 mm · Number of fixing points: 2 pcs · Mounting type: Screws · Area of application: Original · Area of application: Performance · Area of application: Standard
EUR 117,10
Not in stock
Collection only possible with online purchase and appointment.
