Replacement piston for the blown 41 mm cylinder with 10 mm piston pin and 2 pcs. 1.5 mm rectangular piston rings with flank lock (FS) suitable for Puch X30 Velux mopeds / mopeds.
The detailed dimensions of the piston according to the technical drawing can be found in the details. You can also find out more about the piston rings used, their stems and locking types on the legend in the pictures.
This special piston has a molybdenum coating. In combination with oil, this results in technologically advanced wear protection with outstanding sliding properties. The piston is more durable and delivers minimal additional performance compared to an original piston from Meteor.
Attention: We recommend a running clearance of 0.06-0.07 mm for these pistons, the cylinder should therefore be honed to 41.03 mm.
The Meteor piston manufactured for swiing is characterized by its high-quality and precise workmanship.
The piston kit contains piston pins, piston clips and piston rings.
You will find the appropriate assembly tools, piston pin locks and, if necessary, the corresponding cylinder in the accessories section.
Details
Manufacturer | swiing |
Surface | molybdenum-coated |
Ø outside piston (A) | 40.95 mm |
Ø piston pin (B) | 10 mm |
Compression height (C) | 22.5 mm |
Curvature (D) | 3.5 mm |
Total piston height (E) | 50 mm |
Number of piston rings (F) | 2 pcs |
Nominal diameter | 41 mm |
Piston ring mold | Rectangular ring |
Piston ring impact | Flank safety device (FS) |
Piston ring height | 1.5 mm |
Thick piston ring | 1.7 mm |
Weight | 93 g |
Suitable for the following models
Puch | ZA50 (Gebläsegekühlt) Z50 (X30 Velux) 2-Gang MS, MV, MV50 3-Gang VSD, DS, VZ, MC |
Accessories & related products
GPO piston 41 mm (12 mm KoBo) | Puch X30 Velux fan-cooled
Manufacturer: GPO · Nominal diameter: 41 mm · Ø outside piston (A): 40.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 23.2 mm · Curvature (D): 3.7 mm · Total piston height (E): 49.3 mm · Number of piston rings (F): 2 pcs · Piston ring impact: Flank safety device (FS) · Piston ring impact: Internal fuse (IS) · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Weight: 85 g
EUR 56,20
Piston 41 mm (10 mm KoBo) | Puch X30 Velux fan-cooled
Ø outside piston (A): 40.94 mm · Ø piston pin (B): 10 mm · Compression height (C): 23.25 mm · Curvature (D): 3.65 mm · Total piston height (E): 49.35 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 41 mm · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Piston ring height: 2 mm · Weight: 85 g
EUR 56,20
GPO gasket set 40 - 41 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Ø cylinder: 40 mm · Ø cylinder: 41 mm · Number of components: 4 pcs · Ø outlet inside: 22 mm · Hole spacing inlet: 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Area of application: Tuning
EUR 10,00
swiing piston 41 mm (12 mm KoBo) Racing | Puch X30 Velux fan-cooled
Manufacturer: swiing · Surface: molybdenum-coated · Ø outside piston (A): 40.95 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.5 mm · Curvature (D): 3.5 mm · Total piston height (E): 50 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 41 mm · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 1.5 mm · Weight: 94 g
EUR 78,80
Moped fans like you also bought:
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift
EUR 11,20
EUR 24,89/l
Continental 2.00 - 2.50 x 17" tube
Manufacturer: Continental · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Tire height [%]: 100 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Wheel size [inch]: 17 " · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5 · Valve type: TR6 car valve
EUR 16,80
GPO gasket set 40 - 41 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Ø cylinder: 40 mm · Ø cylinder: 41 mm · Number of components: 4 pcs · Ø outlet inside: 22 mm · Hole spacing inlet: 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Area of application: Tuning
EUR 10,00
GPO cylinder 41 mm fan-cooled 10 mm KoBo | Puch X30 Velux, N-2AH
Manufacturer: GPO · Manufacturer: Meteor Racing · Material: Gray cast iron · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 60 ccm · Nominal diameter: 41 mm · Ø piston pin (B): 10 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Hole spacing outlet: 42 mm · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Area of application: Tuning · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Camouflaged: No
EUR 123,90
Not in stock