Crankshaft with reinforced connecting rod suitable for Sachs 504/1 and 504/2 mopeds / mopeds.
Dimensions of the crankshaft:
The needle bearing is included in the scope of delivery.
You can find the matching bearings and oil seals below in the accessories.
Note: the clutch-side groove for the key is present.
For use on cylinders with original bore, the cylinder must be adapted in the area of the cylinder neck so that the reinforced connecting rod does not protrude.
Made by the quality brand swiing – swiss ingenious.
Original Sachs spare part number: A4376
Details
Dimension needle bearing | 12 / 15 x 14.2 mm (axe 12) |
Manufacturer | swiing |
Material | Steel |
Cheek type | standard |
Crankshaft stroke | 42 mm |
Thread type | MF8x1 (fine pitch thread), MF10x1 (fine pitch thread) |
Connecting rod length center-center | 85 mm |
Total length of crankpin on clutch side | 78 mm |
Total length crankpin ignition side | 71 mm |
Ø crank webs | 80 mm |
Ø piston pin (B) | 12 mm |
Thread length | 12 mm, 9 mm |
Ø Connecting rod eye | 15 mm |
Weight | 977 g |
Ø Bearing seat (clutch side) | 15 mm |
Ø Bearing seat (ignition side) | 15 mm |
Area of application | Standard |
Wide crank webs | 34.2 mm |
Length 1st paragraph | 19 mm |
Length 2nd paragraph | 46 mm |
Ø 1st step (on the coupling side) | 15 mm |
Ø 2nd shoulder (on the clutch side) | 11.6 mm |
Length of shoulder (ignition side) | 35 mm, 25.5 mm |
Number of gears | 2 pcs |
Suitable for the following models
Sachs | 505 (mit Tretwelle) - 1A (AT), 2 A (HG) |