Solid clutch puller for the original clutch and clutches with corresponding hole spacing on your Puch Maxi moped / moped and others with E50 engine.
The clutch pack is screwed on cleanly with the black screws. The large, galvanized screw can then be used to apply pressure to the crankshaft to lift the clutch.
The matching, red anodized cover should always be used to protect the KW stub.
Attention: The tool only fits the original clutch and replacement clutches from Surflex.
Clutch hole spacing: 32 mm
Clutch thread: M6
Ø inner shaft cover: 12.1 mm
You can find the corresponding clutch and other special tools for the E50 engine in the accessories section.
Exceptional product for the highest demands of the quality brand swiing®.
Original Puch spare part number: 905.6.34.109.0
Details
| Manufacturer | swiing |
| Area of application | (Dis)assembly tool |
Suitable for the following models
| Puch | E50 |
Accessories & related products
HK Clutch "Racing" | Puch E50
Manufacturer: HK Clutches · Material: Steel · Material addition: Chrome steel (stainless steel) · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs
EUR 351,60
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Color: silver · Resistance: 1000 Ω · Pony OEM number: A2099 · Sachs OEM number: 0265 100 00
EUR 10,30
Clutch 3-jaw (aluminum) | Puch E50
Ø inside: 12 mm · Ø inside: 14.6 mm · Ø outside: 93 mm · Material: Aluminum · Material: Steel · Material addition: Composite materials · Area of application: Original · Area of application: Standard · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Thickness: 20.9 mm
EUR 58,50
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Number of components: 1 pcs · Width across flats Screw: 19 mm · Material: Steel · Area of application: (Dis)assembly tool · Surface: blackened · Strength class: 8.8 · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Total length: 55 mm · Total length: 75 mm
EUR 11,60
swiing® revival upright spring blue galvanized | Puch
Spring design: Tension spring · Ø inside: 9 mm · Ø outside: 14 mm · Length spring hook: 19 mm · Length spring hook: 53 mm · Ø wire: 2.5 mm · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: galvanized (blue) · Total length: 122 mm
EUR 3,15
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Area of application: Standard · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm
EUR 3,30
Karcoma fuel filter plastic small
Ø inside: 3 mm · Ø outside: 20 mm · Manufacturer: Karcoma · Material: Plastic · Filter type: Plastic net · Color: transparent · Color: white · demountable: No · Ø fuel hose connection: 4.9 mm · Ø fuel hose connection: 6 mm · Total length: 23.4 mm · Total length: 50 mm
EUR 6,80
Oil seal NBR 17/40/7 A DUO | Puch E50
Simmering type: A DUO - With rubberized outer casing / two sealing lips. · Ø inside: 17 mm · Ø outside: 40 mm · Manufacturer: Puch · Material: NBR · Area of application: Standard · Surface: rubberized · Temperature resistance (min.): -30 - 100 °C · Width: 7 mm
EUR 6,00
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Ø inside: 106 mm · Ø outside: 116 mm · Manufacturer: swiing® revival parts · Number of components: 1 pcs · Material: Sealing paper · Color: sand-colored · Number of fixing points: 4 pcs · Thickness: 1 mm · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4,55
Collection only possible with online purchase and appointment.
